|
| |
The Microlader interface with double SIO connects the Lipo-checker and features a true single cell supervisory during charging Lipo packs.
The SIO2USB-PC cable (#0590) can now be used. SOLD OUT
SKU Number: EVO0690
|
|
|
|
|
| |
Mercury M300M Instant is a medium viscosity cyanoacrylate developed for demanding high speed wicking applications. Excellent adhesion and cure speed on difficult to bond plastics and rubbers and contaminated or acidic surfaces..
APPLICATIONS: High performance wicking and bonding of close-fitting parts including: plastics, rubbers, metal, wood, leather, fabric and composites to themselves or in various combinations
USEFUL HINTS/NOTES: Bond time is extremely fast, align parts prior to assembly. Also for locking parts that are pre-assembled.
Discontinued, while supplies last, all sales final.
SKU Number: MER300M1OZ
|
|
|
|
|
| |
Mercury M300M Instant is a medium viscosity cyanoacrylate developed for demanding high speed wicking applications. Excellent adhesion and cure speed on difficult to bond plastics and rubbers and contaminated or acidic surfaces..
APPLICATIONS: High performance wicking and bonding of close-fitting parts including: plastics, rubbers, metal, wood, leather, fabric and composites to themselves or in various combinations
USEFUL HINTS/NOTES: Bond time is extremely fast, align parts prior to assembly. Also for locking parts that are pre-assembled.Discontinued, while supplies last, all sales final.
SKU Number: MER300M2OZ
|
|
|
|
|
| |
Popular socket head sheet metal screw. Qty 10 2 packs of 10 each left in stock!
SKU Number: RRCSHSS04X12X10
|
|
|
|
|
| |
This is economical, large bottle, 8 oz. size of Mercury M300M Instant is a medium viscosity cyanoacrylate developed for demanding high speed wicking applications. Excellent adhesion and cure speed on difficult to bond plastics and rubbers and contaminated or acidic surfaces..
APPLICATIONS: High performance wicking and bonding of close-fitting parts including: plastics, rubbers, metal, wood, leather, fabric and composites to themselves or in various combinations
USEFUL HINTS/NOTES: Bond time is extremely fast, align parts prior to assembly. Also for locking parts that are pre-assembled.
Useful on large projects or for refilling empty smaller bottles.
Keep excess supply in freezer for long term.Discontinued, while supplies last, all sales final.
SKU Number: MER300M8OZ
|
|
|
|
|
| |
4S K6 Series 450. 45C (20.25 Amps) Constant, 90C (40.5 amps) Burst. High discharge cells.
Weight: 71 grams
Measures: 55 x 31 x 19mm LAST ONES LEFT - CLOSEOUT, NO RETURNS 4 LEFT IN STOCK AS OF 1/13/25
SKU Number: KYP4S0450HD45C
|
|
|
|
|
| |
Fan housing for 55mm GWS Electric Ducted Fan Power Systems. This is the gray one for 300 and 300H Fan Systems.
For 300 size motors. (Superseded part number: GWEDF55300H-1) DISCONTINUED, WHILE SUPPLIES LAST, CLOSEOUT, SALE IS FINAL
SKU Number: GWDFS005
|
|
|
|
|
| |
Fan housing for 64mm GWS Electric Ducted Fan Power Systems. This is the gray one for 300 and 300H Fan Systems. For 300 size motors. DISCONTINUED, WHILE SUPPLIES LAST, CLOSEOUT, SALE IS FINAL
SKU Number: GWEDF64300H-1
|
|
|
|
|
| |
Mercury M100XF is the result of nearly 2 years of lab work by Mercury Chemist. This work has resulted in a formulation that is among the fastest, strongest and highest quality ever available. M100XF is formulated with Mercury proprietary ingredients that make it a great choice for tough to bond substrates. M100XF is a 100 cps and sets in 5 to 15 seconds and has minimal gap filling qualities and excellent wetting out features.
APPLICATIONS: High performance bonding of close-fitting parts including: plastics, rubbers, metal, wood, leather, fabric and composites to themselves or in various combinations.
USEFUL HINTS/NOTES: Bond time is extremely fast, align parts prior to assembly. Discontinued, while supplies last, all sales final.
SKU Number: MER100XF1OZ
|
|
|
|
|
| |
M2.6 Set Screw for 64mm Impeller Hubs and other uses. Package contains 5 screws. DISCONTINUED, WHILE SUPPLIES LAST, CLOSEOUT, SALE IS FINAL
SKU Number: GWEDF64-3
|
|
|
|
|
| |
Connect 3 each 2S packs or 2 each 3S packs in series to charge as 6S assembly. To be used ONLY when charging in BALANCE MODE. The best way to charge packs that are being discharged in series. Balance harness from battery pack must be plugged into the balance connector immediately adjacent to the charge connector where your heavy wires are plugged in. CLOSEOUT: WHILE SUPPLIES LAST!
SKU Number: RRCCGCDDN236
|
|
|
|
|
| |
Replacement Aluminum Prop/drive shaft adapter for GWS 75mm fans with early style rotors (EDF75-7 & EDF75-8). Rotor presses directly onto adapters splined shaft. Not for new style rotors. (New style rotors, a screw is used for attachment and can be seen in center of rotor) This is the adapter only without sets crews or wrench. Fits 2.3mm shafts. DISCONTINUED, WHILE SUPPLIES LAST, CLOSEOUT, SALE IS FINAL
SKU Number: GWEDF75-4
|
|
|
|
|
| |
DESCRIPTION: Mercury M68DB is a debonder especially formulated for Mercury CA adhesives. It is a clear liquid with a relatively low evaporation rate that attacks and dissolves cured or uncured Instant Superglue (cyanoacrylate).
APPLICATIONS: Can be used to debond misaligned parts or clean up excess adhesive. It also is useful for removing spilled adhesives from work area. Debonds accidentally bonded skin.
USEFUL HINTS/NOTES: Mercury M68DB Debonder works best under repeated applications rather than one excessively large application. Apply debonder, allow it to dissolve hardened superglue and repeat as necessary. Use in an inconspicuous area for testing. May attack certain plastics and remove paint or varnish.Discontinued, while supplies last, all sales final.
SKU Number: MER68DB2OZDE
|
|
|
|
|
| |
New model replacement hub for EDF 75 to drive new fan rotors with D cut. Fits motors with 3mm shafts. Great for those of you putting brushless motors into the GWS 75mm ducted fan units. DISCONTINUED, WHILE SUPPLIES LAST, CLOSEOUT, SALE IS FINAL
SKU Number: GWADP004B
|
|
|
|
|
| |
New type upgraded for higher power systems. Requires D cut shaft adapters. DISCONTINUED, WHILE SUPPLIES LAST, CLOSEOUT, SALE IS FINAL
SKU Number: GWDFS009E
|
|
|
|
|
| |
.156 OD, .014 wall x 12" Length. 1 rod per item. WHILE SUPPLIES LAST...
SKU Number: KS8128
|
|
|
|
|
| |
A handy companion for your flight box. Ideal for putting a couple drops of fuel right where you want them. 2 oz. capacity.
SKU Number: SIGPB001
|
|
|
|
|
| |
High Quality 30 Minute Epoxy. Use epoxy where a strong non-brittle bond is required. Firewalls, landing gear blocks, wing hold down bolt blocks, fuel proofing and on sensitive materials like foam. 30 minute epoxy is best for quick repairs and new model construction where lots of working time is required. Also excellent for wetting out small fiber glass sections. Hint! Need your joint to cure a little faster? Take a covering heat shrink gun to the joint and warm it up. Be carefull, the heat will at first cause the epoxy to become thinner, it might run out of the joint and make a mess. Also, be warned! A little heat goes a long way and can cause your glue to dry faster than you had planned. You can also preheat the glue before applying to the parts or pre heat the parts. And, if your resin feels hardened inside the bottle, just warm it in the microwave for 10 seconds or so and you'll be good to go! WHILE SUPPLIES LAST! Learn about epoxy from an expert at RCModelReviews
SKU Number: PARB3004
|
|
|
|
|
| |
High Quality 30 Minute Epoxy. Use epoxy where a strong non-brittle bond is required. Firewalls, landing gear blocks, wing hold down bolt blocks, fuel proofing and on sensitive materials like foam. 30 minute epoxy is best for quick repairs and new model construction where lots of working time is required. Also excellent for wetting out small fiber glass sections.Hint! Need your joint to cure a little faster? Take a covering heat shrink gun to the joint and warm it up. Be carefull, the heat will at first cause the epoxy to become thinner, it might run out of the joint and make a mess. Also, be warned! A little heat goes a long way and can cause your glue to dry faster than you had planned. You can also preheat the glue before applying to the parts or pre heat the parts. And, if your resin feels hardened inside the bottle, just warm it in the microwave for 10 seconds or so and you'll be good to go! WHILE SUPPLIES LAST!
Learn about epoxy from an expert at RCModelReviews
SKU Number: PARB3008
|
|
|
|
|
| |
Maytech 2205S 2300 RC DC Brushless motor engine With CCW thread on Shaft for FPV BTF racing drone quadcopter. SOLD OUT
SKU Number: MTO2205S2300CCW
|
|
|
|
|
| |
Kokam, 8.4V 640 mah, 2 cells in series, new. Pack weighs 24g/0.9oz. This pack requires a Lithium Ion Charger rated for the correct number of cells as Ion and Polymer share the same charging method.
Low on stock, call first please. Discontinued, non-warranty, while supplies last, all sales final.
SKU Number: KOK2S0640HD15C
|
|
|
|
|
| |
Connector Housing 2.5mm 2POS; XHP-2; JST Part #555485, PRICED EACH
SKU Number: RRCMH02JST
|
|
|
|
|
| |
Weld Bond is a non-toxic, fume free adhesive formulated for smooth and porous surfaces alike. Bonds almost anything to anything. Weld Bond is not flammable, non toxic, non staining and won't become brittle with age. It may be mixed with water to form a brushable sealer if so desired. Weld Bond is Foam Safe and works well with Depron, Poly-Styrene and other hobby foams. Joint remains slightly flexible which is desireable with Depron and other sheet foams. If your friends all think your models are bricks, this is the glue for you as it's also advertised as a great masonry adhesive. Many purposes, one adhesive. DISCONTINUED, WHILE SUPPLIES LAST SOLD OUT - 4oz SIZE;
SKU Number: RRCWELDBOND
|
|
|
|
|
| |
Connector Housing 2.5mm 8POS; XHP-8; JST Part #923773, PRICED EACH
SKU Number: RRCMH08JST
|
|
|
|
|
| |
With solderable nickel tabs. Super High discharge 20C. 32G/1.1oz. This cell is commonly used for S-300 and up applications. Run 2P and these make great S-400 and S-480 or any brushless to 30 amps intermittent. Lithium packs/cells require a Lithium Ion Charger rated for the correct number of cells as Ion and Polymer share the same charging method. Priced below in various configurations. NEW Discontinued, non-warranty, while supplies last, all sales final.
SKU Number: KOK1S0740HD20C
|
|
|
|
 "evoJet Orbit Microlader SIO Interface to USB-PC")
 "Mercury M300 medium viscosity adhesive 1 oz")
 "Mercury M300 medium viscosity adhesive 2 oz")
 "Socket Head Sheet Metal Screw, #4 x 1/2\" Qty 10, SELLING OUT!")
 "Mercury M300 Medium Viscosity Adhesive 8 oz - LAST ONE LEFT!")
 "RRC K6 Series 14.8V 4S 450mAh 45C - LAST ONES LEFT - HALF OFF!")
 "GWS EDF55-300H Fan Systems 55mm Outer Case - Gray")
 "EDF64-300H Fan Systems 64mm Outer Case - Gray")
 "Mercury M100XF High Performance ARF CA 1 OZ")
 "GWS M2.6 Set Screw for Impeller Hub (GWADP003)")
 "Charge Cord Board 3x2S or 2x3S into 6S")
 "GWS Fan Impeller Hub Set Early EDF75 to 2.3mm")
 "Mercury M68 Debonder 2 OZ")
 "GWS Fan Impeller Hub Set EDF75 D-Cut to 3mm Motor")
 "SIG PRIMER BOTTLE 2 OZ")
 "PARBOND 30 Minute 4 ounce Epoxy")
 "PARBOND 30 Minute 8 ounce Epoxy")
 "Maytech 2205S 2300kv Brushless Motor CCW")
 "Kokam Lithium Polymer 2S 640 mAh 15C")
 "Connector Housing 2.5mm 2POS; XHP-2; JST Part #555485")
 "Weld Bond -FOAM SAFE-")
 "Connector Housing 2.5mm 85POS; XHP-8; JST Part #923773")
 "Kokam 1S 740 mAh Single Cell raw Super High Discharge 20C")
