|
| |
KODO Quadcopter Prop Set Black & White LAST SET LEFT IN STOCK!
SKU Number: DIDE1502
|
|
|
|
|
| |
Techni-Edge Handy Snap Blade Knife. 13 points on snap blade. When point gets dull, just snap it off with pair of pliers. Blade retracts into handle for storage. Made in USA. Discontinued by manufacturer, while supplies last!
SKU Number: TE01-037
|
|
|
|
|
| |
Techni-Edge 01-091, 6" Swivel Hobby Knife. Blade rotates 360*. For cutting circles and curves. Aluminum handle. Requires TE01-092 Swivel Blades. Made in USA.
One blade included. Discontinued by manufacturer, while supplies last!
SKU Number: TE01-091
|
|
|
|
|
| |
Techni-Edge 01-092, Swivel Hobby Knife Replacement Blades. Blade rotates 360*. For cutting circles and curves. Blades mounted at factory in special plastic blade holder that fits in TE-01091. Two blades in a Pack. Made in USA. Note: Photo is highly magnified, this unit fits in a knife holder as listed. Discontinued by manufacturer, while supplies last!
SKU Number: TE01-092
|
|
|
|
|
| |
5 pcs, #11 Hobby Knife Blades. Fit above Hobby Knives, Techni-Edge, Xacto and etc.
Small plastic protective, container with resealable cap. Perfect for workshop or field box. Discontinued by manufacturer, while supplies last!
SKU Number: TE01-113
|
|
|
|
|
| |
Rear Cover/Backplate new old stock in package.
SKU Number: 46601
|
|
|
|
|
| |
1 idle stop adjustment screw and spring.
SKU Number: 40764
|
|
|
|
|
| |
Idle Needle Valve new old stock in package.
SKU Number: 40757
|
|
|
|
|
| |
High Speed Needle Valve Only. New old stock in package. Written on package is Leo .46. An ASP Needle screws right into a Leo needle valve boss I have. I believe Leo, Tigershark and ASP parts are the same, you be the judge.
SKU Number: L46NV
|
|
|
|
|
| |
Not sure how this works or adjusts, it definately had an idle needle looking shaft on it. Pressed into a brass fitting with O-ring on big diameter and male threads.
SKU Number: 40028
|
|
|
|
|
| |
I'm not 100% certain what this part is, it's brass, has an o-ring, I'm guessing it's contains the needle seat by looking at it and is probably the brass part if any in a rotating barrel. Probably fits a wide range of displacements in this engine family. I believe Leo, Tigershark and ASP parts are the same, you be the judge. Part number given and part name are written on package in pen.
SKU Number: 20671
|
|
|
|
|
| |
Barrel Screw Set. Parts packages look same as ASP in artwork, style, font and similar looking part numbers. Came to me in same box, I'm pretty sure Leo, ASP, TigerShark and some others are all the same.
SKU Number: 40032
|
|
|
|
|
| |
5S K6 Series 850. 35C Constant 70C Burst. High discharge cellls. Industry Standard XH balance plug. Weight: 113 grams. Measures: 55 x 37.5 x 30mm. LAST ONES LEFT, HALF OFF!
SKU Number: KYP5S0850HD35C
|
|
|
|
|
| |
K6 Series 1300. 35C (45.5 Amps) Constant, 70C (91 amps) Burst. High discharge cells.
Weight: 195 grams
Measures: 72 x 34 x 37.5mm LAST ONES LEFT IN STOCK, HALF OFF!
SKU Number: KYP5S1300HD35C
|
|
|
|
|
| |
Beefy 8mm yokes on a 7-3 blade set. Blades only, no spinner or hub. DISCONTINUED BY MANUFACTURER, WHILES SUPPLIES LAST SOLD OUT
SKU Number: MTEF0703
|
|
|
|
|
| |
8mm yokes on a 15.5x9.5 blade set. Blade length 6.772" (172mm). Blades only.
SKU Number: MTEF15595
|
|
|
|
|
| |
1820 motor has small weight, is designed specifically for indoor ultra-light acrobatic models (F3P). Two oversize and high quality ball bearings fix the rotor, which ensures its long life and excellent balance. The motor comes with a complete set of propeller mount accessories, as well as the perfect packaging to protect the motor and its accessories.
Model NO.: MTO1820-2300-M Motor KV ........................................ 2300(RPM/V) Shaft................................................2mm Stator size..........................................?14.0X15.0 Motor Size..........................................?18x20 Max. Current.......................................9A Input Volt. ..........................................2S Lipo cell NET Weight .......................................15g Thrust...............................................................175g Watt. ............................................................85W DISCONTINUED BY MANUFACTURER, WHILE SUPPLIES LAST
SKU Number: MTO18202300
|
|
|
|
|
| |
Maytech 2205S 2300 RC DC Brushless motor engine With CW thread on Shaft for FPV BTF racing drone quadcopter
SKU Number: MTO2205S2300CW
|
|
|
|
|
| |
Feigao 13084 Series Long Brushless Motor with planetary gearbox. Ratio 4:1. 20mm x 40mm case. 2.3mm x 10mm shaft. Weight = 80g/2.8oz. Choose # windings below (21,23,25 or 27). Motor constants listed with choice. While supplies last...
SKU Number: F13084LGxx
|
|
|
|
|
| |
Feigao 38084 Series Short Brushless Motor direct drive or mount in your own gearbox. 27.6mm x 48mm case. 3.17mm x 10.5mm shaft. Weight = 135g/4.8oz. Choose # windings below. Motor constants listed with choice. While supplies last...
SKU Number: F38084Sxx
|
|
|
|
|
| |
Feigao 38084 Series Long Brushless Motor. 37.6mm x 58mm case. 3.17mm x 10.5mm shaft. Weight = 170g/6.0oz. Choose # windings below (9 or 17). Motor constants listed with choice. While supplies last...
SKU Number: F38084Lxx
|
|
|
|
|
| |
All controls have Latest Software onboard! The Phoenix-25 ESC available in aircraft and helicopter versions and is ideal for Most Mid sized outrunners 400 size and smaller. Astro 020, Astro 05, Aveox 1005, Jeti Phasor (under 25 amps) and Hacker BL-20 and BL-40 motor applications.
Cells w/ BEC 5-10 or 2-3 Lipo
Cells w/o BEC 5-16 or 2-5 Lipo
Continuous 25 Amps
Surge 40 Amps
Switching Rate 7,000 Hz
Resistance 0.0065 Ohms
Brake yes, programmable
Reversible yes - change any two wires
Size 1.08 x 0.91 x 0.16 in.
Weight (w/wires) 0.7 oz. (17g)
Universal connector Castle Creations Warranty Info. DISCONTINUED BY CASTLE, WHILE SUPPLIES LAST
SKU Number: CCPHX25
|
|
|
|
|
| |
Phoenix Ice HV controllers offer incredible reliability and flexibility for your high powered applications. Now available in 40, 60, 80, 160, and 160 Lite amp configurations, with more on the way. Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card. Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details). Opto isolated throttle cable helps reduce radio interference Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight! Designed in Kansas. Components manufactured in the USA, Mexico, and China. Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase. The following features are included with all ICE controlers: Data Logging; Ice brings another incredibly useful feature, extensive data logging capabilities. The controllers are able to measure and record many parameters at sample rates that you choose between 10 samples per second and 1 sample per second. Data points include: Battery Voltage, Battery Ripple, Battery Current, Controller Temperature, Motor RPM, Controller Input Throttle and Controller Motor Power Output. Data is stored directly in the controller and may be accessed once the run is over using the Castle Link USB adapter (sold separately) and Castle Link software (available free at castlecreations.com). The Max Log Size is 21,504 bytes, everything takes one byte except for motor rpm which takes two. Logging 'Battery Current' at 1 sample / second - 358 minutes of logging time (almost 6 hrs)
Logging 'Motor RPM' at only 1 sample / second - 179 minutes of logging time
Logging everything at only 1 sample / second - 44 minutes of logging time
Logging everything at 10 samples / second - 4 minutes and 28 seconds Specifications Ice Lite HV60:
Dimensions:2.6" (66mm) x 1.3" (33mm) x .8" (20.6mm)
Max Input Voltage 50V up to 12S Lipo, 14S A123, 36 cells Nicad or NiMH.
Max Continuous 60 Amps
Brake yes, on/off
Reversible yes - change any two wires
Low Voltage Cut-off, auto lipo or nimh/nicd
Weight (whithout wires) 2 oz. (56.7g)
Universal connector
BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments.
Castle Link Compatible Castle Creations Warranty Info. DISCONTINUED BY CASTLE CREATIONS, WHILE SUPPLIES LAST
SKU Number: CCPHXICE60HV
|
|
|
|
|
| |
5" Super sharp stainless steel scissors. Sharp and long lasting. Perfect for trimming canopies, cutting trim and covering. No tool kit is complete without a quality set of sheers. Discontinued, while supplies last!
SKU Number: EXL55611
|
|
|
|
|
| |
Black Velcro brand One Wrap Strap. Handy for strapping down batteries, RX's and etc. on or in your aircraft or heli. WHILE SUPPLIES LAST, NO LONGER AVAILABLE IN 1/2-INCH.
SKU Number: VELCRO1WS12B
|
|
|
|
 "KODO Quadcopter Prop Set Black & White")
 "Techni-Edge 01-037 Snap Blade Knife")
 "Techni-Edge 01-091, 6\" Swivel Hobby Knife")
 "Techni-Edge 01-092 Swivel Hobby Knife Blades. 2 Pack")
 "#11 Hobby Knife Blades 5 pack by Techni-Edge")
 "RRC K6 Series 18.5V 5S 850mAh 35C ~LAST ONES LEFT, HALF OFF!")
 "RRC K6 Series 18.5V 5S 1300mAh 35C ~LAST ONES LEFT, HALF OFF!")
 "MT 7x3, 8mm Yoke Folding Prop Blade Set")
 "MT 15.5x9.5, 8mm Yoke Folding Prop Blade Set")
 "MTO18202300")
 "Maytech 2205S 2300kv Brushless Motor CW ~LAST ONE LEFT!")
 "Feigao 13084 Series Long Brushless 20mm Motor-Geared")
 "Feigao 38084 Series Short Brushless 28mm Motor Direct - LAST ONE LEFT!")
 "Feigao 38084 Series Long Brushless 28mm Motor")
 "Castle Creations Phoenix 25")
 "Castle Creations Phoenix ICE HV 60 V2 Brushless ESC")
 "Excel 5\" Stainless Scissors, WHILE SUPPLIES LAST!")
 "Velcro Brand One Wrap Strap 1/2W x 8-inch L, Black")
