| |
|
Page [ 1 | 2 | 3 | 4 | 5 | 6 ] |
| - Shop >
Til It's Gone!
|
All close-out sales are AS-IS and final.
Products on this page are discontinued or replaced with newer models
or are items we no longer have room to inventory.
All items are new old stock.
Pricing for most items on this page are less than 1/2 (some less than 1/3!) of original price. In fact, I just recently cut most items here in 1/2 from the previous discount price! Get a bargain for some necassary parts or experimental gear. When it's gone it's gone, not to return to this page. These items are occupying a couple of shelving units we need for other products. Help us de-clutter and free up some much needed space and we'll help you get a screaming good deal! | | | |
3-4" Y harness built in our shop with Genuine Deans Ultra Red connectors.
3 batteries in series into 1 ESC.
14 gauge heavy duty wire. Use to add the voltage of 3 matched capacity packs together for higher volgat use. For example, 2 each 3S 4800 packs and 1 each 2S 4800 pack will yeild an output of 8S @ 4800mah.We sell and use only Genuine W.S. Deans Plugs. Plug-Harnesses-Ys-Pigtails Category Link While Supplies Last!
SKU Number: RRCYDEANS3BS1E
|
|
|
|
| | |
3-4" Y harness built in our shop with Geniune Deans Ultra Red connectors.
batteries into 2 parallel ESC's.
14 gauge heavy duty wire. Lets your double capacity, for example you can run two 11.1 (3S) 2100mah packs together so they function just like 1 3S 11.1volt 4200mah pack. Great way to economize smaller packs you already own into your new larger projects.We sell and use only Genuine W.S. Deans Plugs. Plug-Harnesses-Ys-Pigtails Category Link While Supplies Last!
SKU Number: RRCYDEANS1B2PE
|
|
|
|
| | |
Replacement pigtail for your Speed 480 set up. Heavy duty Genuine Deans Ultra Red female connector. Approximately 9" long. Plug-Harnesses-Ys-Pigtails Category Link
SKU Number: RRC2PPFDUS480
|
|
|
|
| | |
Maxx Products Light Weight Motor Mount, large size. Fits most outrunners up 400 watt range like Himax 35 series and AXI 28 series. Fits most Inrunners 20-28mm od. Injection molded part. Stands motor out 3.8" (97mm). SORRY, SOLD OUT, DISCONTINUED BY MANUFACTURER
SKU Number: MPIACC3958
|
|
|
|
| | |
Slender Glow Starter easily fits in pocket accepts your AA Rechargeable. Easily swap out battery whenever needed. Smaller glow starter fits in pocket easily. Machined aluminum case, fits any normal glow plug. Includes cap. Battery not included.
SKU Number: RDHE0003
|
|
|
|
| | |
Micro Motor and ESC Set.
Micro Outrunner Brushless 5A Micro ESC, Speed Control and Brushless Micro Outrunner 3.5g, 7.4V. Discontinued, while supplies last!
SKU Number: RRCMICROPFS74
|
|
|
|
| | |
Micro Outrunner Motor 4500KV for 7.4 volt operation.
Use up to ~3-4oz models.
Specifications:
KV 4500
Voltage 7.4V
No load current 0.5A
No load RPM 33200 +/- 3%
Max continuous current 2A
Continuous RPM 21000+/- 3%
Resistance 1.18ohm
Dimensions 13 x 4.6mm
Shaft Dia. 1.5mm
Weight 3.5g Discontinued, while supplies last!
SKU Number: HEMICRO74V
|
|
|
|
| | |
The Dash One-Meter from Hobby People is the easy way to get flying in a hurry. It is completely ready to fly, and easy to quickly assemble. Great Performance! Dash 1-M's power system is "just right". The Li-Po battery provides more run time with less weight than a typical NiMH battery, thus providing longer run times and consistent power to the brushed motor. Dash 1-M climbs out with authority and makes high speed passes with great stability. The wing and tail are molded from foam with an outer skin, making them resistant to "hangar rash", and can be easily repaired with foam safe glue. Simply fun to fly, fast at full throttle, easy to fly at 1/2 throttle, and glides power-off giving it a wide speed envelope and fun flying characteristics. NEW IN BOX, SOMEWHAT SHELF WORN, LAST ONE LEFT, DISCONTINUED, SALE IS FINAL, AS-IS NON-WARRANTY Assembles in minutes! Amazing features: - 1-Piece undercambered wing
- Bolt-on tail section for quick assembly
- Easily dismantled for storage in the original box
- Includes: Folding Propeller & spare
- Includes: Proportional ESC for throttle
- Includes: Li-Po battery, 2S 1000mAh
- Includes: Li-Po balancing battery field charger (12V Input)
- Includes: Transmitter, 27mHz 4-Channel; 2-Stick; Radio
- Extras: Rubber band for the wing retainer (probably need replaced due to age), ribbon to check wind direction
Requirements: - Transmitter requires 8AA alkaline batteries (not included)
Specification:
Wing Span: 39.4in / 1m
Wing Area: 175 sq. in. / 11.29 sq. dm.
Length: 25in / 635mm
Flying Weight: 13.75oz / 390g
Wing Loading: Wing loading is 34.53g/sq.dm. / (11.3 oz/sq. ft.)
Brushed Motor: 400 size
Brushed ESC: 10amp Photo Credit & Review: Model Airplane News
SKU Number: HP117215
|
|
|
|
| | |
Light weight design made of high quality aluminum bar stock. Shiny finish. Comes with 4mm collet. Reverse Pitch Version. Fits 5/32"(4mm) shaft diameter. Weight: 1.07oz(30g) for Cobalt 05, 15, 20, brushless motors. ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished to a brushed metal finish. Notes on Ordering: 1. Find out the size of the prop nut you need. 2. If you need a different prop nut, you need to order it separately. 3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut. Shiny Finish styles are considered "while supplies last", new style is brushed aluminum.
SKU Number: MPIPSR50R
|
|
|
|
| | |
Light weight design made of high quality aluminum bar-stock. Polished to mirror finish. Comes with 2.3, 3.2 and 4mm collets. Fits 2.3mm, 1/8" (3.2mm), 5/32"(4mm) shaft diameter. Weight: .26oz(7g) for Cobalt 400, Speed 400 motors. ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished. Notes on Ordering: 1. Find out the size of the prop nut you need. 2. If you need a different prop nut, you need to order it separately. 3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut. Shiny Finish styles are considered "while supplies last", new style is brushed aluminum.
SKU Number: MPIPS29
|
|
|
|
| | |
Light weight design made of high quality aluminum bar stock. Polished to mirror finish. Comes with 3.2 (1/8"), 4mm, and 5mm collets. Reverse Pitch Version. Fits 1/8"(3.2mm), 5/32"(4mm), 5mm shaft diameter. Weight: .40oz(11g) for Cobalt 05, 15, 20, brushless motors. ProSpin spinners are made from high quality barstock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished. Notes on Ordering: 1. Find out the size of the prop nut you need. 2. If you need a different prop nut, you need to order it separately. 3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut. Shiny Finish styles are considered "while supplies last", new style is brushed aluminum.
SKU Number: MPIPSR38R
|
|
|
|
| | |
Light weight design made of high quality aluminum bar stock. Polished to mirror finish. Comes with 4 and 5mm collets. Fits 5/32"(4mm) shaft diameter. Weight: .85oz(24g) for Cobalt 05, 15, 20, brushless motors. ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished. Notes on Ordering: 1. Find out the size of the prop nut you need. 2. If you need a different prop nut, you need to order it separately. 3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut. Shiny Finish styles are considered "while supplies last", new style is brushed aluminum.TEMPORARILY OUT OF STOCK, MANUFACTURER BACKORDER
SKU Number: MPIPS44
|
|
|
|
| | |
Light weight design made of high quality aluminum bar stock. Polished to mirror finish. Comes with 4 and 5mm collets. Fits 5/32"(4mm) shaft diameter. Weight: 1.07oz(30g) for Cobalt 05, 15, 20, brushless motors. ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished. Notes on Ordering: 1. Find out the size of the prop nut you need. 2. If you need a different prop nut, you need to order it separately. 3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut. Shiny Finish styles are considered "while supplies last", new style is brushed aluminum.
SKU Number: MPIPS50
|
|
|
|
| | |
Cut for reverse (counter rotating or pusher) prop. Light weight design made of high quality aluminum bar stock. Polished to mirror finish. Comes with 2.3, 3.2 and 4mm collets. Fits 2.3mm, 1/8"(3.2mm), 5/32"(4mm) shaft diameter. Weight: .26oz(7g) for Cobalt 400, Speed 400 motors. ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished. Notes on Ordering: 1. Find out the size of the prop nut you need. 2. If you need a different prop nut, you need to order it separately. 3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut. Shiny Finish styles are considered "while supplies last", new style is brushed aluminum.
SKU Number: MPIPSR29R
|
|
|
|
| | |
This is the original Cox glow head clip with wires. Fits Cox .049 glow heads and others. These are difficult to find now and collectable. They are also very practical and useful! We have a limited supply on hand. Get one while they last!
Priced each, in a plastic bubble pack on Cox display card. CLOSEOUT DISCONTINUED INVENTORY, NEW, SOLD AS-IS, ALL SALES FINAL, NON-WARRANTY SOLD OUT
SKU Number: COXGLOCLIP755-6
|
|
|
|
| | |
Original equipment Thimble Drome Prop. CLOSEOUT DISCONTINUED INVENTORY, NEW, SOLD AS-IS, ALL SALES FINAL, NON-WARRANTY
SKU Number: COX3125X25
|
|
|
|
| | |
Original equipment Thimble Drome Prop. Used on all Cox .020 engines. CLOSEOUT DISCONTINUED INVENTORY, NEW, SOLD AS-IS, ALL SALES FINAL, NON-WARRANTY
SKU Number: COX45X2000
|
|
|
|
| | |
Original equipment Thimble Drome Prop. Used on all Cox .020 engines. This is the stiffer gray plastic. CLOSEOUT DISCONTINUED INVENTORY, NEW, SOLD AS-IS, ALL SALES FINAL, NON-WARRANTY
SKU Number: COX45X20GR
|
|
|
|
| | |
Original equipment Thimble Drome Prop. Gray Props are extra stiff. CLOSEOUT DISCONTINUED INVENTORY, NEW, SOLD AS-IS, ALL SALES FINAL, NON-WARRANTY
SKU Number: COX5X300GR
|
|
|
|
| | |
The Hitec HS-50 Feather Micro servo is a modern miracle of miniaturization. Featuring precision components that have been engineered to provide long lasting trouble free service. The HS-50 is the perfect choice for any micro application from indoor R/C and hand launch gliders, to ultra small electric Park and Yard flyers, Speed 400 and 1/2A powered aircraft. Universal connector. | Torque (4.8v) | Weight | Speed (4.8v) | Bearings | Size SAE | Size Metric | Type |
|---|
| 8.4 oz.in /0.6kg.cm | 6.1g/0.21oz. | 0.09S | Plastic | 0.82" x 0.44" x 0.86" | 21 x 11 x 22mm | Analog |
LAST ONE LEFT, DISCONTINUED, SALE IS FINAL
SKU Number: HRC31050S
|
|
|
|
| | |
Venom Fly 11.1V 3S 3300mAh HD35C Lipo #15094 Venom® DRIVE series LiPo batteries are engineered for the demanding requirements of todays RC car, truck and boat applications. Utilizing the latest advancements in lithium polymer technology and select materials for improved performance, safety and cycle life: DRIVE provides premium and reliable energy to power your passion. This Venom® 35C 3S 3300mAh 11.1V LiPo Hardcase battery with UNI 2.0 is perfect for most 1/8 and smaller brushed and brushless RC rock crawlers and is built with a molded hardcase for added protection and durability. Venom® DRIVE batteries now also include the Venom® Universal 2.0 Plug System for the ultimate in connectivity. Utilizing a high current Amass XT60 base plug, use the correct Venom® UNI 2.0 adaptor for Traxxas® legacy, Deans(TM) or EC3(TM) adaptor to allow for solder-free plug conversion and plug and play use with todays most popular RC vehicles. Battery Balance Connector: JST-XH
Battery Voltage: 11.1V
Capacity: 3300mAh
Cell Configuration: 3S1P
Connector Type: EC3, Deans type, XT-60, Venom Uni 2.0 (all included)
Hard Case: No
Height: 0.9 in (23mm)
Length: 5.43 in (138mm)
Maximum Burst Discharge Current: 231A
Maximum Burst Discharge Rate: 70C
Max Volts per Pack: 12.6V / Min Volts per Pack: 9V
Maximum Continuous Discharge Current: 115.5A
Maximum Continuous Discharge Rate: 35C
Normal/Standard Charge Current: 3.3A
Normal/Standard Charge Rate: 1C
Watt Hours: 36.63
Weight: 10 oz (283g)
Width: 1.85 in (47mm)
Wire Gauge: 12 AWG
SKU Number: VNM3S3300HD35C
|
|
|
|
| | |
Align describes this products as a 5.1V regulator. It's functionality is more of a voltage clipper in that it takes about .25v off the top of whatever you pass through it. If you have a servo that is a bit jittery at the top of the battery pack charge, you can use this product inline to clip off .25v and it will likely solve your problem. This is not a regulator, it's a useful product for some applications but like many things from China, not exactly what they say it is. ;-)
SKU Number: K10381A
|
|
|
|
| | |
50% off selected servos! We're crowd sourcing a shelf clean out. Two shelves filled with servos on sale 50% off. 50% off servo group.
SKU Number: ServoSale
|
|
|
|
| | |
Yes, I have some Calidus kits in stock. They have easily repaired broken tails from poor packing from the maker. The verticals are popped off the horizontals. Just glue them back in place. I'm making this quick listing for those who read in the forums that we have them. This is a kit meaning you have to bolt it all together. I've never flown one and can't help with setup and settings. This is a kit for somebody comfortable combing the internet for the knowledge they need to complete and set it up properly. Rare kit in the USA. I only have a few of these kits. Don't call, if I'm out, I'll take it off the website.
SKU Number: Calidus
|
|
|
|
| | |
APC LP074825C Sport Prop 7.4 x 8.25C
Q40 Carbon DISCONTINUED BY APC, WHILE SUPPLIES LAST, LIMITED INVENTORY AVAILABLE
SKU Number: APC074825C
|
|
|
|
| | |
APC LP07475C Sport Prop 7.4 x 7.5C
Q40 Carbon DISCONTINUED BY APC, LIMITED INVENTORY, WHILE SUPPLIES LAST
SKU Number: APC07475C
|
|
|
|
| | |
APC LP07477C Sport Prop 7.4 x 7.7C
Q40 Carbon DISCONTINUED BY APC, LIMITED INVENTORY, WHILE SUPPLIES LAST
SKU Number: APC07477C
|
|
|
|
| | |
23 amp continuous duty switching power supply with 25 amps peak output. Switching power supplies are light weight and more efficient. Suitable for most bench power supply applications and general purpose applications. Use to power almost any fast charger. The SEC1223 should handle these examples well, 9 Lipo's (30 cells) at 6 amps, 5 Lipo's (16 cells) at 11 amps, 3 Lipo's (10 cells) at 20 amps. Also, any pack under sub C size at any rate and cell count you want. Remember, the charger has overhead which means it draws a little more than 4 amps when charging 10 cells at 4 amps. Great power supply for nearly any application. Specifications:
Input Voltage: 110-120V AC
Output Voltage: 13.8V +/-.05V
Size: 5"x9.8"x10"
Weight 12.2lbs. Refurbished power supply. Fully tested in house. Radical RC 30 Day Warranty from purchase date.
SKU Number: SAMSEC1223R
|
|
|
|
| | |
Great things do come in small packages. Our new, ultra nano HS-5035HD is the digital version of our popular HS-35HD and is destined to become a fan favorite! Equipped with a fully programmable digital circuit, Metal Karbonite(TM) gear train and long life potentiometer, the HS-5035HD provides heavy hitting performance in a lightweight package. Pilots of micro 3D and sport aircraft as well as small helicopters will find it the perfect servo for their aerial theatrics. Small servo, huge performance! Features Industry's Smallest Programmable Digital Servo Optimized, Metal-Brush Coreless Motor Hybrid Metal/Plastic Gear Train Standard Programmable Digital Circuit Custom Long-Life Potentiometer Programmable Functions End Point Adjustments Direction Fail Safe Dead Band Speed (Slower) Data Save / Load Program Reset Accessories Nylon Gear Set Plastic Case Set Applicable Horns HS-5035HD Servo Specifications Performance Specifications Operating Voltage Range (Volts DC) 4.8V ~ 6.0V Speed (Second @ 60?) 0.10 ~ N / A Maximum Torque Range oz. / in. 11 ~ N / A Maximum Torque Range kg. / cm. 0.8 ~ N / A Current Draw at Idle 8 mA No Load Operating Current Draw 60 mA Stall Current Draw 360 mA Dead Band Width 3 us Physical Specifications Dimensions (Inches) 0.73 x 0.30 x 0.61 Dimensions (Metric) 18.6 x 7.6 x 15.5 Weight (Ounces) 0.16 Weight (Gram) 4.5 Circuit Type G1 Programable Digital Motor Type Coreless Metal Brush Gear Material HM / P Bearing Type None Output Shaft (type / Omm) Feather 15 Case Material Plastic Dust / Water Resistance N / A Connector Gauge (AWG) / Strand Count 28 / 20 DISCONTINUED, WHILE SUPPLIES LAST
SKU Number: HRC35035S
|
|
|
|
| | |
Handy tube cutter for your shop or field box. Cut tube 1/8" to 5/8" O.D., Color is RED.
For cutting copper, aluminum, brass and thin wall tubing. RED COLOR, WHILE SUPPLIES LAST
SKU Number: PTC2565
|
|
|
|
| | |
These crystals fit any Hitec FM Transmitters in the 72mhz band. These TX xtals typically have "HTF" or "TF" printed on a white or white with black cap. All channels listed, but does not guarantee availability. Word to the wise: Not sold by Hitec, so very hard to get. Must part out radio systems to get them. Our experience is that changing a TX xtal in a Hitec TX is a BAD IDEA. It will work and you'll range check well, but you'll pick up side bands and become a source of interference to other pilots. Regarding our Crystal Exchanges, we won't accept anything for a Hitec FM TX xtal except a Hitec FM TX xtal. Set the right example here and treat your fellow modeler with respect, get the retune done. WHILE SUPPLIES LAST! Channels Frequency List (for reference only): 72.010 (11)
72.030 (12)
72.050 (13)
72.070 (14)
72.090 (15)
72.110 (16)
72.130 (17)
72.150 (18)
72.170 (19)
72.190 (20)
72.210 (21)
72.230 (22)
72.250 (23)
72.270 (24)
72.290 (25)
72.310 (26)
72.330 (27)
72.350 (28)
72.370 (29)
72.390 (30)
72.410 (31)
72.430 (32)
72.450 (33)
72.470 (34)
72.490 (35)
72.510 (36)
72.530 (37)
72.550 (38)
72.570 (39)
72.590 (40)
72.610 (41)
72.630 (42)
72.650 (43)
72.670 (44)
72.690 (45)
72.710 (46)
72.730 (47)
72.750 (48)
72.770 (49)
72.790 (50)
72.810 (51)
72.830 (52)
72.850 (53)
72.870 (54)
72.890 (55)
72.910 (56)
72.930 (57)
72.950 (58)
72.970 (59)
72.990 (60)
SKU Number: HTFM72TX
|
|
|
|
| | |
FDK (formerly Sanyo) cell Ultra high capacity AA battery. Weight 30.3g, 1.07oz. FDK/Sanyo AA HR6 size cell. Button end cell. Unlike Sanyo's other NiMH cells, these ultra high capacity AA cells should never be fast charged EVER. We recommend 70mah (or less) wall chargers (very slow overnight charging) only. Suggested maintenance charge rate 50-70mah. Manufacturer's listed internal resistance is 25m. Discontinued by FDK(Sanyo), see the new Twicell version While supplies last!
SKU Number: RRC04H2500AABE
|
|
|
|
| | |
Hitec HS-605BB - Ball Bearing Servo Specifications Modulation: Analog Torque: 4.8V: 76.40 oz-in (5.50 kg-cm) 6.0V: 94.40 oz-in (6.80 kg-cm) Speed: 4.8V: 0.17 sec/60° 6.0V: 0.13 sec/60° Weight: 1.73 oz (49.0 g) Dimensions: Length:1.59 in (40.4 mm) Width:0.77 in (19.6 mm) Height:1.57 in (39.9 mm) Motor Type: 3-pole Gear Type: Plastic Rotation/Support: Dual Bearings Rotational Range: Pulse Cycle: 20 ms Pulse Width: 900-2100 us Connector Type: Hitec HS-605BB Product Number: 31605S DISCONTINUED BY HITEC, LAST ONE LEFT!
SKU Number: HRC31605S
|
|
|
|
| | |
New in box. A rare turn count new old stock motor and esc system from Astro flight. If I remember correctly I ordered these special back in the day. Found hidden in inventory. Snag one of the coolest Astro brushless park flier motors every made.
Astro Flight Mighty Micro 010 Planetary System. Complete System includes Mighty Micro 010 ten turn Motor, 4.4 to 1 Planetary gear box and 10 amp speed control. Specifications: - Gear Ratio: 4.4 to 1
- Winding: 10 turns #24
- Motor Diameter: 0.98 inches
- Length: 1.50 inches
- Prop shaft diameter: 3 mm
- Electronic Control: Sensorless, 10 amps, BEC 5 Volts @ 1 amp, Auto Lipo Cutoff
- Cells: 6 to 10 cells NiMH/NiCad / 2-3 Lipo, Fully Connectored
Motor Constants: RPM/volt: 3,200KV, Resistance: .156 ohms, No load current: .3A. Max Constant Amps: 7.5
Expected Performance on 2 Lithium Cells:
| Prop | Amps | Volts | Watts | RPM | Thrust | | 9 x 4.5 | 4.8A | 7.4V | 36W | 5,600 | 10 oz | | 9 x 6 | 5.8A | 7.4V | 43W | 5,200 | 9 oz | | 10 x 5 | 6.2A | 7.4V | 47W | 5,100 | 12 oz | | 10 x 7 | 7.5A | 7.4V | 55W | 4,800 | 13 oz | | 11 x 7 | 8.5A | 7.4V | 64W | 4,500 | 15 oz |
Expected Performance on 3 Lithium Cells:
| Prop | Amps | Volts | Watts | RPM | Thrust | | 9 x 4.5 | 8.3A | 11V | 91W | 7,500 | 21 oz | | 8 x 6 | 8.8A | 11V | 96W | 7,300 | 17 oz | | 9 x 6 | 10A | 11V | 110W | 7,000 | 19 oz | | 10 x 5 | 10.5A | 11V | 116 W | 6,800 | 22 oz | | | | | | | |
NEW IN SHELF-WORN BOX, LAST ONE LEFT, NON-WARRANTY, SALE IS FINAL
SKU Number: AST801PM-10T
|
|
|
|
| | |
New in 801P box. A rare turn count new old stock motor and esc system from Astro flight. If I remember correctly I ordered these special back in the day. Found hidden in inventory. Snag one of the coolest Astro brushless park flier motors every made.
Astro Flight Mighty Micro 010 Planetary System. Complete System includes Mighty Micro 010 eight turn Motor, 4 to 1 Planetary gear box and 10 amp speed control. Specifications: - Gear Ratio: 4 to 1
- Winding: 8 turns #23
- Motor Diameter: 0.98 inches
- Length: 1.50 inches
- Prop shaft diameter: 3 mm
- Electronic Control: Sensorless, 10 amps, BEC 5 Volts @ 1 amp, Auto Lipo Cutoff
- Cells: 6 to 10 cells NiMH/NiCad / 2-3 Lipo, Fully Connectored
- System Motor Kv 4000 prm/volt
- Winding Resistance 0.100 ohms
- Kv with Gear Box 1000 rpm/volt
- No Load Current 400 ma
- Maximum Continuous Current 11 amps
- Maximum Current for 1 minute 12 amps
- Maximum Power 120 watts
- Maximum Motor Rpm 40,000 rpm
- Maximum Prop Rpm 10,000 rpm
- Motor Weight 34 grams
- Gear Box Weight 16 grams
- Control Weight 10 grams
- Motor Length 0.90 inches
- Gear Box Length 0.50 inches
- Prop Shaft Diameter 3 mm
- Prop Adaptor Diameter 5 mm
- Motor Diameter 25 mm
- Control Type Sensorless
- Control Rating 10 amp continuous
- Voltage Range 6 to 12 Volts
- BEC Rating 5 volts at 1 amp
NEW IN SHELF-WORN BOX, LAST ONE LEFT, NON-WARRANTY, SALE IS FINAL
SKU Number: AST801PM-10T
|
|
|
|
| | |
Vintage, new in box, Astro 05 FAI Cobalt Racing Motor is a high-performance motor designed for electric RC (radio-controlled) aircraft. It's known for its durability and efficiency, making it a popular choice among hobbyists and competitive flyers. Specifications: - Powerful Cobalt Magnets
- Precision Machined
- Silver Graphite Brushes
- Silicon Steel Laminations
- Modular Contruction
- Every Motor Dyno-Tested
Manufacturer Discontinued, sold as is non-warranty, no returns, sale is final.
SKU Number: AST6605S
|
|
|
|
| | |
The Savox SC-0251MG is a high torque, metal-geared, digital servo which is suitable for many applications. Features: - Metal gear train ensures durability under harsh situations.
- Slightly taller case design.
- Ideal for aircraft and some 1/8 off road car applications.
Specifications: - Torque @ 4.8v - 13.0kg/180.5oz-in
- Torque @ 6v - 16.0kg/222.2oz-in
- Speed @ 4.8v - 0.20 sec/60 deg
- Speed @ 6v - 0.18 sec/60 deg
- Dimensions L x W x H (mm): 40.7 x 19.6 x 42.4
- Weight: 61.0g
- Operating Temperature: 14° - 122°F (-10° - 50°C) Running Current (no load): 300mA @4.8V, 350mA @6.0V
- Stall Current (at locked): 2600mA @4.8V, 3200mA @6.0V
- Idle Current: 5mA @4.8V, 6mA @6.0V
- Wire Length: 300 +/- 5mm
- Output Gear Spline: 25 Tooth
- Bearings: 2BB
- Operating Travel: 120? (1000 -> 2000 μ second)
- Neutral Position: 1500 u second
- Pulse Width Range: 800 -> 2200 μ second
- Maximum Travel: Appx 164? (800 -> 2200 μ second)
- Refresh Rate: 240 Hz
- Motor Type: Brushed
Discontinued, while supplies last! 3 LEFT IN STOCK
See SAVSC-0251MGP for replacement
SKU Number: SAVSC-0251MG
|
|
|
|
| | |
The Savox SC-0252MG is a high torque, metal-geared, digital, standard servo. A great replacement for standard, plastic-geared servos with less torque. Features: - Metal gear train ensures durability under harsh situations.
- Higher torque output than standard servos.
- Ideal for 30-60 size aircraft, and some car applications.
Specifications: - Torque @ 4.8v - 7.2kg/100.0oz-in
- Torque @ 6v - 10.5kg/145.8oz-in
- Speed @ 4.8v - 0.23 sec/60 deg
- Speed @ 6v - 0.19 sec/60 deg
- Dimensions L x W x H (mm): 40.7 x 19.6 x 39.4
- Weight: 49.0g
- Operating Temperature: 14° - 122°F (-10° - 50°C)
- Running Current (no load): 300mA @4.8V, 330mA @6.0V
- Stall Current (at locked): 1400mA @4.8V, 1700mA @6.0V
- Idle Current: 6mA @4.8V, 6mA @6.0V
- Wire Length: 300 +/- 5mm
- Output Gear Spline: 25 Tooth
- Bearings: 2BB
- Operating Travel: 120° (1000 -> 2000 μ second)
- Neutral Position: 1500 μ second
- Pulse Width Range: 800 -> 2200 μ second
- Maximum Travel: Appx 164° (800 -> 2200 μ second)
- Refresh Rate: 240 Hz
- Motor Type: Brushed
Discontinued, last one!
See SAVSC-0252MGP for replacement
SKU Number: SAVSC-0252MG
|
|
|
|
| | |
The SC-1252MG is a high speed, low profile servo which combines leading edge technology with super high 12 bit (4096) resolution. Ideal for 1/10 on-road cars where space is limited and speed is desired. Features: - Metal gear train ensures durability under harsh situations.
- Ideal for 1/10 on road vehicles.
- Aluminum case provides cooler operating temperatures.
Specifications: - Torque @ 4.8v - 4.5kg/62.5oz-in
- Torque @ 6v - 7.0kg/97.2oz-in
- Speed @ 4.8v - 0.08 sec/60 deg
- Speed @ 6v - 0.07 sec/60 deg
- Dimensions L x W x H (mm): 40.8 x 20.2 x 25.4
- Weight: 44.5g
- Operating Temperature: 14° - 122°F (-10° - 50°C)
- Running Current (no load): 150mA @4.8V, 180mA @6.0V
- Stall Current (at locked): 2000mA @4.8V, 3000mA @6.0V
- Idle Current: 5mA @4.8V, 5mA @6.0V
- Wire Length: 300 +/- 5mm
- Output Gear Spline: 25 Tooth
- Bearings: 2BB
- Operating Travel: 90° (1000 -> 2000 μ second)
- Neutral Position: 1500 μ second
- Pulse Width Range: 950 -> 2050 μ second
- Maximum Travel: Appx 160° (700 -> 2300 μ second)
- Refresh Rate: 240 Hz
- Motor Type: Brushed
Discontinued, while supplies last, 2 LEFT IN STOCK!
See SAVSC-1252MGP for replacement
SKU Number: SAVSC-1252MG
|
|
|
|
|
|
|
|
 "Battery/ESC Y 3 Battery Series into 1 ESC Harness Built with Genuine Deans Ultra Red Connectors")
 "Battery/ESC Y Harness Battery into 2 Parallel ESC Built with Geniune Deans Ultra Red Plugs")
 "2 Pole/Wire Pigtail 9\" w/Genuine Deans Ultra Red Female Speed 480 Wire 17ga")
 "Stand Off Motor Mount Large")
 "AA Glow Starter")
 "Micro Power Flight Set: ESC-5A and Motor 3.5g for 7.4V")
 "3.5g Micro Outrunner Brushless Motor 7.4 Volt")
 "HOBBY PEOPLE DASH ONE-METER Ready To Fly - LAST ONE LEFT!!!")
 "MPI 29mm (1.14\") E-Spinner Bar-Stock Aluminum Shiny Finish, WHILE SUPPLIES LAST!")
 "MPI 38mm (1.50\") E-Spinner Reverse Pitch Bar-Stock Aluminum Shiny Finish, WHILE SUPPLIES LAST!")
 "MPI 44mm (1.73\") E-Spinner Bar-Stock Aluminum Shiny Finish, WHILE SUPPLIES LAST!")
 "MPI 50mm (1.97\") E-Spinner Bar-Stock Aluminum Shiny Finish, WHILE SUPPLIES LAST!")
 "MPI 29mm (1.14\") E-Spinner Reverse Pitch Bar-Stock Aluminum Shiny Finish, WHILE SUPPLIES LAST!")
 "Vintage Original Cox Factory Glow Head Clip with Wires #755-6")
 "Vintage Cox 3.125 x 2.5 - 3 Blade Prop")
 "Vintage Cox 4.5 x 2")
 "Vintage Cox 4.5 x 2 Gray Series")
 "Vintage Cox 5 x 3 Gray Series")
 "Hitec HS-50 Micro Servo, LAST ONE LEFT!")
 "Venom Fly 11.1V 3S 3300mAh HD35C, Hard Case ~LAST ONE LEFT!~")
 "Align Two-way Voltage Clipper")
 "Hitec HS-5035HD Ultra Nano Servo 0.16oz")
 "Mini Tube & Pipe Cutter")
 "Hitec FM 72mHz TX Crystals, New or Used")
 "FDK/Sanyo 2500mAh 4.8V 4-Cell NIMH Button End AA Battery")
 "Astro Flight 801P 10T Planetary Geared System")
 "Astro Flight 801P 8T Planetary Geared System")
 "Astro Flight 05 FAI CHALLENGER COBALT MOTOR")
 "Savox SC-0251MG High Torque, Metal Gear, Digital Servo")
 "Savox SC-0252MG High Torque, Metal Gear, Digital Standard Servo - Last one!")
 "Savox SC-1252MG High Speed, Low Profile Servo")
