Made from injection molded high strength plastic. Appears to be glass filled although I can't find any documentation to attest to that fact. Mounting holes pre-drilled for #8 or #10 fasteners. Axle holes have starter center drill mark but no pre-drilled holes so you can setup for any brand axle. 14.5" wide, 4 1/2" high, flat surface in center is 3 5/8" wide. Gear is paintable to match your color scheme. Included is main gear only, no axles, wheels or mounting hardware.
Pre-bent aluminum gear, mounting screws, wheel collars and axles included. Can be drilled for larger axles if you like. Width 8.4", Height 3.7", Mounting plate width .87", axle flange width .5", material thickness .08".
Pre-bent aluminum gear, mounting screws, wheel collars and axles included. Can be drilled for larger axles if you like. Width 8.4", Height 3.8", Mounting plate width .95", axle flange width .5", material thickness .08".
STRONG, LIGHTWEIGHT, & VERSATILE! This landing gear for profile mounting is the answer for your "foamy", "ARF's" and your original designs. Simple and strong mounting with all hardware included. This is THE landing gear for all profiles up to 5/8" wide. Weight including hardware: 34.0 grams.
Notes from Dave: It appears to me these would work well on a profile up to about 24 ounces.
SKU Number: DUB943
Aluminum Landing Gear and Main Gear
The main gear carries a model's weight on takeoff and landing, and an aluminum gear leg absorbs the shocks of field operation. This category covers pre-bent aluminum main gear and gear blanks for a range of airplane sizes.
Pre-Bent Gear
Pre-bent options include the Four Pi Pre-bent Aluminum Gear, the Du-Bro 35-61 size Super Strength Main Gear, and 400 Size Pre-bent Gear in straight and curved shapes. A pre-bent leg saves you the work of forming the bends and gives a repeatable stance under the airframe.
Gear Blanks
Aluminum Main Blanks, such as the 3/32 by 1-1/2 inch stock in 12 and 15 inch lengths, let you bend a custom leg to your own drawing. Working from a blank suits a scratch build or a model without a ready-made gear, and the extra length gives you room to shape the axle stubs and mounting tabs the way your design calls for.
Look over the aluminum main gear and blanks below to fit your model.
 "Du-Bro 35-61 size Super Strength Main Gear")
 "400 Size Pre-bent Gear Straight")
 "400 Size Pre-bent Gear Curved")
 "Landing Gear Aluminum Main Blank 3/32 x 1-1/2 x 12 Inch")
 "Landing Gear Aluminum Main Blank 3/32 x 1-1/2 x 15 Inch")
 "Landing Gear Aluminum Main Blank 3/32 x 2 x 18 Inch")
 "Du-Bro Micro Profile Landing Gear")
