Sodium-ion batteries are highly safe, have no risk of explosion and fire, and are environmentally friendly, non-toxic and non-polluting. No memory effect - the battery can be charged in any state of discharge, giving you peace of mind. The working principle of sodium ion batteries is similar to that of lithium-ion batteries, which utilize the insertion and removal process of sodium ions between the positive and negative electrodes to achieve charging and discharging. Example photos show 2-Cell Flat Packs, single cells and wire configuration options.
Single Cell Specifications:
Nominal Voltage: 3.1V
Work Voltage Range:1.5V-4.1V
Continuous charge /Discharge current:10C
Operating Temperature:-30°-60°
Cycle Life:More than 4000 times (0.5C/0.5C @80% SOH)
Nominal capacity: 1300mAh
Dimension: 18.3mm(D)65.3mm Approx.
Weight: 38+- 10 g
Advantage of Sodium ion Battery
1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.
2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.
3. High Power: The cells have continuous discharge current 10C Peak discharge current.
4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.
5. Wild Voltage range: The working voltage range is 1.5V-4.1V.
6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.
7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.
8. Charge on Li-Ion mode set voltage to maximum 3.9-4.1V
This listing is for one 2-Cell battery pack, single cells shown for example only.
SELECT YOUR OPTIONS BELOW TO CUSTOMIZE YOUR BATTERY PACK
Furukawa (formerly Panasonic) N-700 AACL Typical AA Size, Diameter .56"/14.3mm x 1.93"/48.9mm High, .81 oz/23g. Low Button type AA, Use to build special packs or convert your dry T/RX to NiCad. Manufacturers listed internal resistance is 16Ω.
Fururkawa N-700AACL Battery - 1.2 Volt 700mAh AA Ni-Cd ( NUN-1100AF, IT-900AA, IT-700AA ) CELLS ARE COMING IN AS GREEN OR YELLOW CASING.
Considered one of the most powerful servos in the micro class, the HS-65 is offered with a choice of "shock resistant" Metal or "zero wear" Karbonite gears. The 65 series features a top-ball bearing for long life and positive centering, 31 ounces/inches of power at 6 volts and is an excellent choice for higher performance micro helicopters, electric park flyers, and 1/18 scale cars. Universal connector.
Torque (4.8/6v)
Weight
Speed (4.8/6v)
Bearings
Size SAE
Size Metric
Type
25/31 oz.in,1.8/2.2 kg.cm
0.44 oz./12.47g.
0.14/0.11s
1BB
0.92" x 0.45" x 0.94"
23.60 x 11.60 x 24.00mm
Analog
Choose Quantity Option below. Want 1, 2, or 3 servos? Select first option, then enter quantity 1, 2, or 3. Want a bulk discount? Select 4-Pack, then enter how many 4-Packs you want.
4S K6 Series 3800. 65C (247 Amps) Constant 130C (494 Amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 426 grams Measures: 140 x 48 x 30mm
The heart of this beautiful airplane is it's superior wing design! The light, strong, built-up balsa structure incorporates built-in wingtip washout for superior stability and control. Even expert pattern fliers are impressed with the Kavalier's smooth, responsive flying ability. Make perfectly coordinated, in-the-groove turns. Fly through any aerobatic maneuver with rock solid precision. Flare out for slow, main gear only landings with no tendency to stall or snap roll. Highly recommended as a student pilot's second model! Balsa fuse, tail and wing with built in washout. Build it bolt on or rubber band mount wing with semi-symmetrical airfoil. Steerable nose gear, pre-bent aluminum landing gear and rugged plastic cowling and canopy included as are glow engine mount, full size plans and photo illustrated instruction book. Specifications:
Wingspan 55 1/2 in 1410 mm Wing Area 575 sq. in. 37.1 sq dm Weight 5 1/2 lb 2495 g Wing Loading 22 oz/sq ft 6713 g/sq m Radio Required 4-Channel Recommended Engines .29 - .40 cu. in. (4.8 - 6.6 ccm) 2-Stroke
Notes from Dave: This is absolutely my favorite glow sport ship of all time. It's a classic kit. There was just nothing more exciting on trainer night than to have a graduated student come up with one of these for his 2nd or 3rd aircraft and ask me to test fly it. I dare say, I'd put a whole tank through the model and say, yes, it's still my all time favorite! The model is very pattern like for it's size, super smooth and yet retains all the personality of weekend sport ship. Friendly yet aerobatic and even aggressive if you set the throws for more spirited performance. They land like a dream, are utterly trustworth in any situation. You'll love it as I do.
Power Packages for setups in performance chart available. Includes Castle ESC, Himax motor and APC or Zoar Prop & Lipo Battery.
Electric Setup and Performance Chart
Power Pack #
Motor
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM
Est. Top Speed
Pack #1
Himax 3528-1000
4
11x7
46.2
687
9,490
72
61
1854
64
Pack #2
Himax 3528-800
5
11x6
37.6
699
10,430
79
57
1971
64
Pack #3
Himax 3528-1000
6
10x6
55.1
1230
13,650
102
75
2836
77
Pack #4
Himax 5018-530
8
11x7
36.7
1092
11,660
113
75
3127
79
Pack #5
Himax 3516-1350
3
10x6
41.2
460
9,550
50
54
1130
55
Estimates based on manufacturers provided constants using E-Calc. High Quality 2200-3300mah used as trial cell in calculations. Presumed model weight of 78oz. @3 cells (added oz for higher cell counts). Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of battery, ESC, and many other factors.
This kit is only shipped by Parcel Post to locations outside of zone 4 from our shop regardless of shipping method choosen.
Temporarily out of stock, pending manufacturer production
FDK (formerly Sanyo) AA 1650 TX pack made to fit Hitec's new Aurora 9 and the Airtronics SD-10G. Excellent way to go when replacing a weak factory pack. 7.2 volts and 6 cells just more capacity. Comes without plug, choose below or reuse your old plug.
Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.
Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.
Himax Brushless motors are manufactured to high standards for the discerning modeler. Designed for light-weight, high efficiency, high torque and durability Himax Outrunner motors are sure to make today's radio controlled models perform. The HC2816 series motors are made for medium size models weighing 9 to 20 ounces. Replacement for 370-400 motors.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
77g/2.7oz.
27.8mm (1.09") x 32.5mm (1.28")
4-13, 18 15s
4.0mm (1.574")
20k
890
.119Rm
.8A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
2
12x8
15.6
117
4,610
22
34
2
12x10
17.5
131
4,350
22
40
3
9x7
13.5
152
8,130
25
52
3
10x6
16
180
7,780
31
43
3
10x8
19.1
215
7,350
32
54
3
11x4.7
17.3
195
7,600
32
32
4
8x6
14
210
11,310
31
62
4
9x5
16.9
254
10,880
39
49
4
10x3.8
18.5
278
10,650
41
36
5
8x4
14.8
278
14.430
40
52
6
7x6
18.4
414
17,090
45
94
Estimates based on manufacturers provided constants using E-Calc. High Quality 2100mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
GF Nylon Spinners have light weight aluminum back plate. No special prop nut or adapter is required. Spinner is held to back plate with two attachment screws. Machined groove supports edge of spinner. Back plate is knurled on both sides to grip both your prop and prop adapter making it easier to tighten than other spinners of this style. Size 2.5" (63mm) OD. Factory shaft hole in back plate is .252" (6.4mm). Overall Length is 2.465" (62.6mm).
See this and all other new sizes up to 75mm in Spinners-Fixed-Props. Within "E-Power-Everything".
Third from left motor in photo is the 3522 series.
Himax 3522 series motors are most generally used in 34-90 oz models depending on application. Replaces AXI 28 series motors. Manufactured to high standards for the discerning modeler. Package includes collet type prop adapter, prop saver, bullet females for your ESC and fasteners.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
162g/5.7oz.
35.2mm(1.39") x 48mm(1.89")
8-29, 40 15s
5.0mm (.1969")
20k
700
.049Rm
1.3A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
3
10x10
16.9
190
6,850
30
64
3
11x10
22.2
250
6,530
40
61
3
12x8
24
270
6,420
48
47
3
12x10
27.8
313
6,190
49
57
3
13x10
33.7
379
5,830
59
54
3
14x10
39.7
447
5,470
67
51
4
10x10
26.8
402
8,740
50
81
4
11x10
34.4
516
8,240
65
76
4
12x8
37.1
557
8,060
78
60
5
9x7
21.7
407
11,580
55
75
5
10x10
37.7
707
10,450
73
97
5
11x5.5
32.3
606
10,830
84
54
5
11x7
38.1
714
10,420
91
67
6
10x7
39
878
12,770
100
82
Estimates based on manufacturers provided constants using E-Calc. High Quality 2200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. * Over reccomended maximum RPM. SKU Number: MPIHC35220700
12 pack #2 laser cut aircraft ply washers. 1/64" thick (Aproximately .016" or .4mm), OD .650", ID .089". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC2FW164
Usefull for models .10 through .30 size. A compact 3.6 ounce package with plenty of punch. Range of setups provided below to fit many needs.
Specifications As Per MFG:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
Max Current
103g/3.63oz.
35mm (1.38") x 36.5mm (1.44")
371 watts
5mm (.197") x 53.5mm OAL
Non-Pub
910
Non-Pub
Non-Pub
25.8
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
2
12x10
23
173
4,900
30
45
2
13x10
27.2
204
4,550
35
42
3
10x6
19.8
223
8,440
38
46
3
11x5.5
23.9
269
8,070
45
41
3
11x7
27.8
313
7,720
49
50
3
12x6
30.9
348
7,440
54
41
4
9x5
20.4
306
11,660
47
53
4
9x7
25.9
389
11,130
51
72
4
10x5
27.2
408
11,000
59
50
5
8x6
23.8
446
14,580
55
80
5
9x5
29
544
14,040
69
64
6
7x6
21.6
486
18,080
52
99
6
8x4
23.5
529
17,870
65
64
Estimates based on manufacturers provided constants using E-Calc. High Quality 2200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
ULTRA-HIGH POWER LITHIUM-ION CELL, 2800mAh, 2S 2-Cell Pack
INR18650-P28A
Molicel has dedicated our product development in the path of ultra-high power cells with focus.
[EDITS PENDING: The launch of a new generation 18650 power cell, INR-18650-P28A, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.]
This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.
Single Cell is in last photo.
Molicel Battery - Ultra-high Power Cell INR18650-P28A
Charge Current: Recommended: 2.8 A (1C); Maximum: 6.0 A (3C)
Discharge Current: Continuous (MAX): 35 A
Dimensions: Diameter: 18.6mm X Length: 65.2mm
Weight: 46g
Power Output: 184W (10s, SOC 90%); 168W (10s, SOC 50%)
Energy Density: 610 Wh/l; 240 Wh/kg
ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 ?C)
Choose your custom pack from the options below, if there's a plug and wire combination not listed, type in your request in the box provide below the options. Photos depict wire configuration options, want something different, type in your request in the box provided below the options.
This compact controller can keep it's cool even during the most extreme 3D maneuvers. Talon 25 is intended for use in most 400-size helicopter setups running up to 6S LiPo or your favorite 3D foamy that pulls up to 25 amps. Despite it's size, it boasts an impressive 8 amp peak/3 amp continuous BEC, keeping even the most draining servos at ease. Talon 25 also offers Castle's industry-leading helicopter functions, not to mention easy programming using the Castle Link USB adapter (coupon for free Castle Link included). Talon 25 tips the scales at a mere 18 grams!
Notes from Dave: This is a world beater ESC. Now we can run high voltages in our smaller models with a small tight ESC from a quality manufacturer. I'm very excited to put one of these in my 5S, 16 ounce Stick 400. Sweet!
Input Voltage: 2-6 Lipo Max Continuous Amperage: 25* BEC Voltage: 5.5v BEC Amperage: 3 Continuous, 8 Surge** Switching Rate 7,000 Hz Resistance 0.0065 Ohms Brake yes, programmable Reversible yes - change any two wires Size .072 x 1.72 x 0.32 in. Weight (w/wires) 0.63 oz. (17.9g) Universal connector
*RC HOBBY APPLICATION RATING: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC's operating temperature.
**Peak indicates amperage sustainable for most servos' current draw transients. Always confirm servo current draw before the first flight of the model.
Fast when you want it to be, slow when you need it to be, and always stylin'.
In the full-scale aviation world, the Very Light Jet category (VLJ) is comprised of small business jets that seat four to eight people. They give private pilots the speed to effortlessly zip past an ordinary Cessna 172 on the way to a weekend fly-in. With a VLJ, the pilot would be finished eating that $100 hamburger before the 172 even enters the landing pattern.
The design of our Raven is inspired by Terry Dunn's VLJ design published years ago in Fly R/C magazine. Although Terry's original design was a simple, foam park-flyer, it had great lines reminiscent of the VLJs that Cirrus, Sonex and others now produce - or even possibly Mooney, if they had ventured into private jets back in the day.
We based the size of the Raven around a 64mm EDF - a power system that's inexpensive, readily available, and has plenty of power for this type of design. It's mounted right up-top, in the air flow channel of the fuselage. From there, we massaged and reworked Terry's design, adding landing gear and re-engineering the fuselage to have a removable wing section. A little tuck here, a little snip there, and the Raven was born.
The Raven's wing is a snap to build. It utilizes our unique WEB-LOCK wing construction to lock in critical alignment locations. The stressed balsa skin makes the panels very light and surprisingly rugged.
We've designed the Raven's fuselage to be self-aligning, with a light-weight internal structure for added strength. Surrounding this is the outer balsa skin, which is strong, light-weight, and twist-resistant. Overall, this balsa/ply airframe is uncomplicated, lightweight, easy to build, and features precision laser-cut parts that fit together quickly and accurately.
Oh, and let's not forget that V-Tail. It's the Raven's party piece - the touch that gives it that unique look - its swagger - its style.
The wing is removable for storage/transport and for giving access to the radio/servo area. From there, you have easy access to install the radio and ESC. What's more, the fully assembled model can fit in the trunk of most cars.
Up front, there's a large hatch, which gives quick access to the battery and nose-gear. The hatch's spring-loaded latch makes swapping in a fresh pack a breeze.
When it comes time to fly, the Raven will surprise you in a number of ways: First, is the takeoff roll - it's shorter than you might expect!
Second, the Raven's wide flight envelope. It's just as much at home cruising around the pattern at lower throttle settings as it is tearing up the skies at full-throttle. Next is the Raven's surprising aerobatic capabilities. Now you'll never confuse this for a pattern ship, but Raven can easily perform loops, rolls, 1/2 Cubans, split-S, inverted flight and more - and most without needing a dive to start.
Lastly is the controllability. Even at very low speeds, you'll always feel that you have control of the Raven. And that controllability is a welcoming feeling when it comes time to land smoothly, slowly, and right down the runway.
Specifications:
Wingspan: 47.25 inches
Wing Area: 330 sq. inches
Length (airframe only): 34.25 inches
Weight: 1.7 pounds framed, 3.5-4 pounds RTF
Radio: 4 channel with V-tail mixing
Give 30+ in./oz. servos (Mini servos - similar to HS-5065MG
Power:
64mm EDF Power Unit (12 bladed unit - similar to Freewing E7207)
60+ amp ESC, 4S LiPo)
Features of the Raven:
Premium USA Hardware Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
WEB-LOCK Construction There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Front hatch This extra-large top hatch gives you plenty of room to access the battery. It's front spring-lock makes it quick to remove the hatch and quick to lock the hatch back in place.
Short Aileron and V-Tail Linkages We've designed the Raven so the linkages are to be as short as possible, giving you positive, slop-free control. Exactly what you want in a high-performance design. Design your color scheme
Download this sheet to design your Raven's color scheme.
Additional items needed to complete the Raven kit:
64mm EDF Power Unit (ESC, battery)
Radio system with 5 servos (we used mini-sized servos in our prototypes)
Pushrods: 6" pushrods for the ailerons and v-tail, 8-10" for the nose gear
Clevises for the pushrods
Servo extensions: four 12" for the control surface servos
Y-harness for nose gear servo
Wheels: one 1.5-2" (nose), two 2" (mains)
Covering (typically 2 rolls will work, depending on the color scheme)
Please note:
We've done everything we can to make the Ravem a fun and easy to assemble kit. That being said, THIS IS NOT A BEGINNER KIT. If you've never built this type of balsa kit before, you will probably experience many challenges along the way. The manual is not written for beginners - it is assumed that the builder has the skills and techniques needed for this type of build.
Due to high demand, allow at least 2 weeks or more for shipment.
6S K6 Series 3000mAh 65C (195 amps) Constant; 130C (390 amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 485 grams. Measures: 150mm L x 45mm W x 38mm H. SKU Number: KYP6S3000HD65C
Carbon Square Tube Round Hole, select from a variety of sizes, minimum quantity 6 rods total; any type carbon rod mix O.K.
All items that qualify as Rod Stock Type Items are found here, to help you mix-n-match: Rod Stock
Minimum order 6 pieces Rod Stock items, see policy below. Make selections (price accumulates per selection), then enter Qty "1" to get one of each size selected (sizes can be duplicated). IMPORTANT: YOU MUST CHOOSE AN OPTION FOR EACH Mix-n-Match line item; AND/OR YOU MUST CHOOSE "see my other type carbon selection".
Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. Weight is in grams per meter, as per the manufacturer documentation, no guarantees on weight.
1.4mm - 2.22g/m
2mm - 4.53g/m
6.0mm - 25.0g/m
8.0mm - 48.0g/m
10.0mm - 65.0g/m
HOW TO ORDER: If you want to mix and match types of carbon, only select the sizes you want from this type below (1 selection per item quantity desired), then on the other line items, choose the bottom option "See my other type carbon selection". Then, go to another type of carbon listing to select the other types and sizes you want. If you want all 6 pieces to be the same type and size, select it 1 time, enter quantity of "6" in the quantity box, then make the other drop down options as "See my other type carbon selection". 6-Piece Minimum can be a variety of carbon types and sizes. Click "Add to Cart". Then, if needed, keep repeating this until you have reached the 6 piece minimum and have selected all the types and sizes you want.
3S K6 Series 4000. 65C (260 Amps) Constant 130C (520 Amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 390 grams Measures: 141 x 49 x 26mm
Side By Side 9.6V FDK (formerly Sanyo) HR-AA NIMH 1650 Flat pack. HIGH capacity pack! Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have come with! Tired of having to quick charge at the field? You can program all night Friday night and then fly all day Saturday with a fully charged 1650. Runs most simple TX about 12 hours, Computer TX about 6-8 hours. Weight 223g/7.85oz.
Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.
Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty
Planetary ball bearing gearbox for genuine S-480 motors. Comes with press on 3. 2mm bore pinion. Output shaft diameter is 4mm. These gearbox's are very very smooth and quiet unlike other very similar looking units. Warning! Long can 400's with 2.3mm shaft use the S-400 gearbox.
Size:
OD of mounting flange: 1.08" (27.5mm) OD of main gearbox body 1.165" (29.6mm) Motor Mount Holes: 2 each - 3mm, 19mm on center Length of gearbox housing 1.25" (31.9mm) Overall Length W/Shaft 1.865 (52.2mm)
 "RRC K6 Series 5100 14.8V 4S 65C")
 "Sodium Na-Ion Battery #18650 7.2V 1300mAh 2-Cell Pack")
 "N-700-AACL 700mAh AA NiCad Single Cell Low Button End")
 "Hitec HS-65MG Mighty Feather Micro Servo Metal Gear")
 "RRC K6 Series 3800 14.8V 4S 65C")
 "Sig Kavalier")
 "RRC K6 Series 5100 18.5V 5S 65C")
 "FDK/Sanyo 1650 AA NiMH 7.2V 6-Cell 3x2 TX Pack")
 "Himax HC2816 Outrunner Motor 890KV")
 "RRC K6 1800 11.1V 3S 65C")
 "GF Nylon Spinner 63mm")
 "GWS Mini Ball Bearing Servo futaba")
 "Himax HC3522 Outrunner 700 KV")
 "RRC K6 Series 3000 7.4V 2S 65C")
 "#2 x 1/64\" Ply Fender Washer 12-Pack")
 "MTO 3536-910")
 "MOLICEL Ultra-High Power 2800mAh 2S 2-Cell Pack, #INR18650-P28A Air")
 "Castle Creations Talon 25")
 "Old School Model Works Raven Kit")
 "RRC K6 Series 3000 22.2V 6S 65C")
 "Carbon Square Tube Round Hole Variety of Sizes (Min. qty. 6 rods total REQUIRED; any type rod mix O.K.)")
 "RRC K6 Series 4000 11.1V 3S 65C")
