Fast, but not too fast. Maneuverable, but not tricky. A snap to build and surprisingly rugged compared to most. The original Sunday Fighters were the brainchild of Ken Willard back in the early 1970's. His were small, .049 powered 3-channel models and proved quite popular. Now, we've taken this idea, enlarged, and re-engineered them to make them as much fun to build as they are to fly.
You should see them take evasive maneuvers in Dog Fighting. Evade with snap rolls into spins, Immelmann turns and a loop. Our radio-controlled Sunday Fighter airplane kits just might be the most fun you've had in a long time.
Because of the interlocking design and high quality laser cutting of the parts, the Sunday Fighter is a quick build. Not only does it build quick, but it also builds straight and true as all of the parts are designed to align properly with a minimum of fuss and alignment tools.
The wings are removable for storage/transport and for giving access to the extra large cabin area. From there you have easy access to install most any brand of radio and control linkages. However, the fully assembled model can fit in the trunk of most mid-sized cars.
Up-front, we've designed in a hatch that covers the battery/tank compartment. This area will easily handle 3s packs and 6 ounce tanks.
Whether you choose to power your Sunday with electric or glow power, we've got you covered. Glow engines can be mounted side, inverted or even upright with a little modification. Electric motors can be mounted using the included Motor Box which will help space your motor to the proper distance.
Go true "old-school" with 3 channel control, or opt for functional ailerons (4 channel).
There are two Sunday Fighters - the German version you see here, and the British version you can see at this link.
Specifications:
Wingspan: 46.5 inches
Wing Area: 725 sq inches
Length (airframe only): 34 inches
Weight: 3.5 - 4 pounds
Radio: 3-4 channel system
Power:
o Glow (.20-.30 engine, 6 ounce tank, fuel tubing)
o Electric (equivalent brushless motor, 3s LiPo)
Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
Dual Ailerons Mounted under the lower wing, these two pre-cut aileron hatches make it easy to install the aileron servos.
WEB-LOCK Construction There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Bolt on main gear Bending your own landing gear is hard. So that's why we include pre-bent main landing gear wire ready for you to assemble.
Front hatch Held in with magnets, this extra hatch gives you easy access to batteries or fuel.
Included Motor Box For electric power, we include the pieces to build this electric motor mounting box.
Design your color scheme Download this sheet to design your Heinschmitt's color scheme.
Additional items needed to complete our Sunday Fighter kit:
o Propeller
o Engine/Motor mount & mounting hardware
o 2-5 servos depending on setup: 2 mini for elevator/rudder, 2 Sub-Micro for ailerons/throttle
o "Y" servo harness (for ailerons)
o Pushrods (two 5" for ailerons, two 20" for elevator & rudder, one 9" for throttle if glow powered)
o Clevises for the pushrods (8 if electric, 10 if glow).
o 2 - 3.5" diameter wheels. We recommend Du-Bro's #350V Vintage wheels for the proper look.
o 1 - tailwheel assembly
o Covering
Flickr Album
Due to high demand, allow at least 2 weeks or more for shipment.
5S K6 Series 3000. 65C (195 amps) Constant; 130C (390 amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 435 grams. Measures: 139mm L x 45mm W x 34mm H. SKU Number: KYP5S3000HD65C
Side By Side, Flat Pack, 9.6V N-700 AAC (Typical AA size).
Direct fit replacement for your Futaba NT-8JY pack, Tower system 3000 TX packs, Hitec TX Packs and any other TX that takes a flat 8 style pack. Many stock factory packs are 500-600mAh. More capacity here.
Weight 180g/6.37oz.
Cell Color is Green or Yellow as per factory production.
Maintenance charge and maximum form charge rate for this pack is not to exceed 70mAh. See chart at top of category page for charging recommendations.
Form charge on factory wall charger only, not to exceed 70mAh. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.
Capable of big sky flying or ball park low-n-slow! You can trust the Quick Wing in any flight condition. Any 12mm brushless motor system capable of turning a 3-4" prop at 10 watts or more will work well. She is sure to please the most speed hungry wing fanatic while still retaining very good slow speed handling characteristics with the 50XC brushed motor and this is my favorite setup here. Quick "3D Jigsaw Puzzle" assembly in only 1-2 hours. World class laser cutting and design make this one of the quickest and most enjoyable balsa models you will ever build. You'll be amazed at the wide speed envelope the Quick Wing 12mm has. It easily goes from high speed to ball park flying with no bad habits. I'm totally comfortable recommending this kit as a good 2nd or 3rd model as long as you keep the power system modest. Advanced pilots can take the power as far as they like. The model is clearly and advanced flying machine with such power.
Specifications:
Wing Span 14.6"
Wing Area 100 sq. in.
Weight 3-3.5oz.
Length 9"
CG: 1-1.125" (25.4-28.5mm) From LE
Required: Nelson So-Lite Covering;3ch+ Radio with elevon mixing, small RX like Berg;2 Micro servos (sub 0.2oz. under 6 gram); GWS50XC motor or 12mm inrunner brushless; Prop: 3x3 suggested; 250-400mah+/- 2S-3S LiPB; ESC.
If you select a receiver (RX), tell us which channel you need at checkout.
GWS 50XC motor on 3-3 prop is for 2S battery only.
Hitec raised the bar by offering the ever popular HS-65 in a new digital version! The HS-5065MG High Performance Micro Servo features Hitec's digital, programmable circuit for incredible resolution, centering and holding torque. Featuring metal gears, a top-ball bearing, and at 31 oz./in. of torque with a quick transit time of 0.11 sec at 6 volts, it is no doubt THE choice for high performance micro helicopters, electric park flyers, and 1/18 scale cars.
Torque (4.8/6v)
Weight
Speed (4.8/6v)
Bearings
Size SAE
Size Metric
Type
25 / 31 oz.in
11.91g/0.42oz.
0.20/0.17S
1BB
0.92 x 0.45 x 0.94
23.37 x 23.88 x 23.88
Digital
Choose Quantity Option below. Want 1, 2, or 3 servos? Select first option, then enter quantity 1, 2, or 3. Want a bulk discount? Select 4-Pack, then enter how many 4-Packs you want.
A123/LithiumWerks Nano phosphate 2S 5000mah Pack (configured from 2S2P 2500mah #ANR26650M1B Cells. Finest RX pack technology and cell ever produced. See individual cell listing above for cell specifications.
Standard shape is Flat (4 cells side by side), square is shown in photo. Stick packs may also be constructed, however they are not repairable if a cell is damaged.
Use only Lithium chargers with an A123/LithiumWerks mode limiting charge voltage to 3.6V per cell. An Astro Blinky for A123/LithiumWerks is highly recommended as a balancing aid for these cells.
Specification's: Weight of built 4S 2500 RX pack is 11.72oz/(332g). See A123/LithiumWerks 2500 Single Cells Above for all other available data.
Want a custom pack? See our custom pack listings, or email us at Sales@RadicalRC.com, we can special make any kind of pack you require!
Note: Photo shows sample Rx pack with double lead option.
For checking pack voltage between flights, our best advice currently is: Leave model on after flight, plug loaded volt meter directly into pack balance plug (charge port OK but not preferred) hold load engaged, switch model off. Allow pack to drain into meter for 5 seconds, take your reading. See my blog post Checking A123 RX Packs For Recharge Point for help in this area.
Just like the Four-Star 40 and the Four-Star 120, the Four-Star 60 has a near perfect blend of simple construction, classic looks, and outstanding flight performance.
State-of-the-art CAD drawn plans and laser-cut parts assure you of precise parts fit and perfect alignment. The lite-ply fuselage and simple wing design get the Four-Star 60 out to the flying field in short order.
With a wing loading like a trainer, the Four-Star 60 is easy to fly, yet will perform all the free-style aerobatics your thumbs can keep up with. Day in and day out, the Four-Star 60 will be the sport model you'll want to take to the flying field every time.
Kit Features: Lite-Ply Fuselage Construction, Pre-Cut Sheet Balsa Tail Surfaces, Durable Aluminum Main Landing Gear, Formed Tailwheel Wire, Molded Clear Plastic Canopy, Full Size Plans, Fast-Building Wing with Spruce Spars, Photo-Illustrated Instruction Book, Engine Mounts, Sig Easy Hinges, Pushrods, Complete Hardware Pack & Large Decal Sheet.
Wingspan: 71 in 1803 mm Wing Area: 920 sq in 60.3 sq dm Flying Weight: 7-8lb 3175-3630g Length: 57 in 1448mm Radio Required: 4 Channel with 5 Servos Recommended Engines: .60-.75 cubic in (10.0 - 12.3 cubic cm) 2-Stroke, .65-.90 cubic in (10.7 - 14.8 cubic cm) 4-Stroke
Special notes about electric from Dave: This model would make an excellent electric conversion. I've seen many of the 4 star series done and they fly well. Plenty of wing area and a light weight design. Below are my suggestions for a range of practical power systems.
Setup and Performance Chart 60
Motor
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM
Est. Top Speed
Himax 3528-800
4
12x6
46.1
1399
9,200
57
52
1399
54
Himax 5018-530
5
14-7
47.4
889
7,790
60
52
1989
58
Himax 5018-530
6
13x8
55.6
1251
9,180
96
70
2690
69
Himax 5018-530
4
16x10
58.1
872
5,550
74
53
1940
58
Himax 5030-390
8
14x7
52.1
1563
9,550
131
63
3305
71
Himax 5018-530
6
13x8
55.6
1251
9,180
96
70
2690
69
Himax 6320-250
10
16x8
44.5
1669
7,920
149
3693
71
Estimates based on manufacturers provided constants using E-Calc. High Quality 2100-3000mah used as trial cell in calculations. Presumed model weight of 76oz. @3 cells (added oz for higher cell counts). Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of battery, ESC, and many other factors.
Side By Side 9.6V AA-700 NiCad. Yes, it is the same size as your current AA pack. A "AA" is a "AA". Slightly higher capacity than man factory packs (600mAh is typical). Also fits Futaba FG radios with gold cases. In the Futaba case the pack appears to have 9 cells but one is a hollow dummy cell. This pack fits just fine and is correct voltage.
Maintenance charge and maximum form charge rate for this pack is not to exceed 70mAh. See chart at top of category page for charging recommendations.
Form charge on factory wall charger only, not to exceed 70mAh. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.
These motors are for large models weighing 4.8-5.8Lb for 3-D flight, up to 9.5Lb for aerobatic flight and 14Lb for leisure flight.
HC50 Outrunners generally used from 800-1500 Watts. High torque to turn large props direct drive. Replaces .40-.60 size engines. Mounting hardware and connectors included. Himax Brushless motors are manufactured to high standards for the discerning modler. Designed for light-weight, high efficiency, high torque and durability Himax Outrunner motors are sure to make todays radio controlled models perform.
All HC50 series outrunner motors include: Prop adapter, female wire connectors, motor mounting kit w/screws and two hex keys. Also included is base for standoff motor mount kit ACC3650 sold seperately.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
275g/9.7oz.
48.8mm(1.96") x 53.2mm(2.09")
30-50, 65 15s
6.0mm (.2362")
12k
530
.033Rm
1.8A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
3
16x10
36.7
413
4,590
76
43
3
18x12
52.7
593
3,990
95
45
4
14x10
40.1
603
6,290
91
58
4
15x10
47.6
714
5,980
105
56
4
16x12
60.8
912
5,440
119
61
5
12x12
42.5
793
8,020
89
90
5
13x10
46.2
866
7,840
111
73
5
14x7
44.2
829
7,930
119
51
5
15x10
64.6
1211
7,010
147
65
6
12x12
55.2
1242
9,020
118
103
6
14x7
57.5
1294
9,090
158
59
6
15x7
67.4
1517
8,600
177
69
7
12x8
53
1391
11,090
153
82
7
13x6.5
56.8
1491
10,890
170
65
8
11x10
59.5
1785
12,490
153
116
Estimates based on manufacturers provided constants using E-Calc. High Quality 3200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. SKU Number: MPIHC50180530
Slow Stick Canard made easy! This all-in-one unit will mount your horizontal stab and allow angle of attack adjustments to suit your special setups. Most canards should be set to between 3 and 5 degrees positive. Range of adjust ment is from 0 to 7 degrees positive. Elevator servo moves with the canard mounting surface so your elevator adjustment stays the same relative to your canard when you alter the angle of attack setting. Mount has built in nose gear block and nose gear steering servo mount. All holes are predrilled. Includes high quality socket head hardware needed to complete.
My personal Slow Stick Canard is a twin tractor. I have a 1000mm boom length and the CG is set at 1-1.25" in ffront of the main wing leading edge. I have never built one with a stock boom length (800mm) but I would start with the CG in the range of 0-.5" in front of the leading edge. The shorter the boom the further the CG comes back, the longer the further forward you would place it. I don't know where Bob Masterson's CG is set but I would thing it is similar to my 1000mm boom setup.
Maiden Flight Video of Bob Masterson's converted Canard Slow Stick. This model is full house with 10" extended boom length.
Himax Brushless motors are manufactured to high standards for the discerning modler. Designed for light-weight, high efficiency and durability of todays performance. Select ESC Combo below.
Specifications/Constants:
Weight
OD x Lengths
Max Efficient
Shaft
Max Motor RPM
KV
Resistance
No Load Current
65g(2.3oz)
20mm (.79") x 42mm (1.68")
10-20A
2.0mm(.078")
60k
4200
.075Rm
.75A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
2
4.1x4.1
15.8
119
24,330
12
94
2
4.7x4.2
21.9
164
21,670
16
86
2
5x3
20.9
157
22,100
18
63
3
4.2x2
20
225
37,490
23
73
Estimates based on manufacturers provided constants using E-Calc. High Quality 500mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
Himax 3528 series motors are most generally used in 34-90 oz models depending on application. Replaces AXI 28 series motors. Manufactured to high standards for the discerning modeler. Package includes collet type prop adapter, prop saver, bullet females for your ESC and fasteners.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
197g/6.9oz.
35.2mm(1.39") x 54.2mm(2.13")
15-48, 68 15s
5.0mm (.1969")
20k
1000
.020Rm
2.6A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
2
10x10
19.5
145
5,960
22
55
2
11x10
26.4
182
5,590
28
62
2
12x10
29.4
219
5,210
34
48
2
14x10
39.2
292
4,470
42
41
3
10x10
33
368
7,990
41
74
3
12x8
42.5
471
7,100
59
52
3
12x10
46.6
520
6,680
57
62
3
13x6.5
44.3
494
6,900
63
41
3
13x8
48.4
540
6,500
65
48
3
13x10
52.8
589
6,080
63
56
3
14,700
51.5
575
6,210
68
40
3
14x10
58.5
653
5,530
68
51
3
15x10
63.7
737
6,850
86
44
4
11x10
54
804
8,580
70
80
4
12x8
56.6
842
8,280
82
61
4
13x6.5
58.9
876
8,010
74
48
5
10x10
57.5
1070
10,720
77
100
5
11x7
57.8
1075
10,680
95
69
6
10x6
55.1
1230
13,650
104
75
Estimates based on manufacturers provided constants using E-Calc. High Quality 2200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. * Over reccomended maximum RPM.
12 pack #2 laser cut aircraft ply washers. 3/32" thick (Aproximately .098" or 2.5mm), OD .650", ID .089". Use in many applications such as wing hold down bolts where a softer washer is often desired. Use for shimming motor mounts, servos and anyplace fine thickness adjustment is needed. Work well with metal and plastic fasteners. SKU Number: RRC2FW332
Sodium-ion batteries are highly safe, have no risk of explosion and fire, and are environmentally friendly, non-toxic and non-polluting. No memory effect - the battery can be charged in any state of discharge, giving you peace of mind. The working principle of sodium ion batteries is similar to that of lithium-ion batteries, which utilize the insertion and removal process of sodium ions between the positive and negative electrodes to achieve charging and discharging. Example photos show 2-Cell Flat Packs, single cells and wire configuration options.
Single Cell Specifications:
Nominal Voltage: 3.1V
Work Voltage Range:1.5V-4.1V
Continuous charge /Discharge current:10C
Operating Temperature:-30°-60°
Cycle Life:More than 4000 times (0.5C/0.5C @80% SOH)
Nominal capacity: 1500mAh
Dimension: 18mm(D)65mm Approx.
Weight: 38+- 10 g
Advantage of Sodium ion Battery
1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.
2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.
3. High Power: The cells have continuous discharge current 10C Peak discharge current.
4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.
5. Wild Voltage range: The working voltage range is 1.5V-4.1V.
6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.
7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.
8. Charge on Li-Ion mode set voltage to maximum 3.9-4.1V
This listing is for one 2-Cell battery pack, single cells shown for example only.
SELECT YOUR OPTIONS BELOW TO CUSTOMIZE YOUR BATTERY PACK
Furukawa (formerly Panasonic) N-700 AAC Typical AA Size, Diameter .57"/14.3mm x 1.98"/50.2mm High, .82 oz/23g. Button type AA, Use to build special packs or convert your dry T/RX to NiCad. Manufacturers listed internal resistance is 16Ω.
Panasonic N-700AAC Battery - 1.2 Volt 700mAh AA Ni-Cd ( NUN-1100AF, IT-900AA, IT-700AA ) Dimensions: Diameter 0.57"(14.3mm) x Height 1.93" (48.9mm) Weight: 0.82oz (23g) Termination: Button End
There's just not enough Oh's in SMOOOOOOOOOOOOOOTH.
Beautiful, isn't she?
And like all great ladies, her graceful ways are evident the moment she takes to the skies.
The Minuette is designed to mimic the look and feel of those wonderful Edwardian flying machines that were flown by those magnificent men.
Building the wing is a snap, as all of the ribs are laser-cut as part of our WEB-LOCK construction for proper alignment with minimum fuss.
If you want to go truly "old school", it can be built for simple 3-channel control (rudder, elevator, and throttle). For even more control, the included ailerons can be made fully functional (4-channel control).
Although power can come from glow or electric powerplants, a simple 3s electric setup is really what the Minuette is designed around. We've created the fuselage with a huge top hatch so you have quick access to batteries and a radio, and it also hides the wing bolts.
In the air, the Minuette is a simple, easy-to-fly cruising aircraft. Takeoffs are in just a few feet, even from grass runways. Once airborne, relax and gently glide her through the air through a series of low-passes, gentle turns, and even horizontal figure eights. With a 3200mAh battery, you can easily achieve 10+ minute flights with plenty of battery left for some touch-and-go's before landing.
The Minuette can even handle a bit of light wind without too much problem, and she is at her best taking off and landing into those gentle winds, if possible.
Please note that the Minuette is not designed (or stressed) for aerobatics. Also, the removable flying wires in the Accessory kit are decorative and not needed to fly - just to look great.
Specifications:
Wingspan: 67.5 inches
Wing Area: 630 sq. inches
Length (airframe only): 38 inches
Weight: 3.5-4 pounds RTF
Radio: 3 or 4 channel (Sub-Micro servos, similar to HS-5065MG)
Power:
Glow (.15-.25 glow)
Electric (250+ watt, 40+ amp ESC, 3S 3200+mAh LiPo)
Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
WEB-LOCK Construction
There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Front hatch
This extra-large top hatch gives you plenty of room to access the battery. It also hides the wing-bolts and gives access to the radio compartment. It's rear lock makes it quick to remove and quick to lock the hatch place.
3 or 4 channels
To aileron, or not to aileron? Whatever your answer is, parts are included to build the wing either way.
Design your color scheme https://oldschoolmodels.com/images/minuette/osmw-minuette-color-scheme-blank.jpg
Additional items needed to complete the Minuette kit:
Propeller
Engine/Motor mount & mounting hardware
Radio system with 3 or 4 servos (we used Sub-Micro servos in our prototypes)
"Y" servo harness (for ailerons)
Pushrods (we recommend pull-pull for elevator and rudder, 6" pushrods for the ailerons)
Clevises for the pushrods
Wheels: two 3.5" vintage look tires
Covering (typically one 2-meter roll will work)
Optional Accessory Kit for a more "scale-like" look
Minuette Accessory Kit:
Although this optional accessory kit is not necessary for the Minuette to fly, it does add a bit of "scale-realism". The flying wires and pylons are removable for easy transport of the wing and fuselage. It includes:
Ready-to assemble 3D printed dummy motor (based on the Anzani "W" 3-cylinder). It is designed and printed by Innov8tive Designs, and meant to slip over your electric motor, mounting to the firewall
Pre-bent upper and lower flying-wire pylons
Anchors, removable flying wires, hooks, and shrink-tubing
Not shown:
Laser-cut profile pilot
4-color, peel-and-stick sticker sheet (pilot and instrument panel only)
Instruction sheet
Due to high demand, allow at least 2 weeks or more for shipment.
The Sig Kadet LT-40 has become the R/C trainer of choice at many club fields. Not long after it's introduction, we started getting requests for a smaller version of the same airplane. So here it is - a compact version of the LT-40 - the new Sig Kadet LT-25. When price shopping this kit, be sure you understand our super low flat rate shipping means total cost to your door is probably the lowest on the planet.
"The R/C Trainer That's All Laser Cut", As you would expect, the new LT-25 inherits all the same gentle flying characteristics of the other legendary Sig Kadets. It has the same light wing loading, which allows it to fly slow enough to give the student pilot time to think and react. It has the same "hands off" stability on all axis. If the student pilot gets disorientated, simply let go of the sticks and the LT-25 will recover and return to level flight within seconds.
Specifications:
Wingspan 63 in 1600 mm Wing Area 724 sq in / 46.71 sq dm Weight 4 - 4 1/4 lb 1814 - 1928g Wing Loading 12 - 13 oz/sq.ft. 3662 - 3967 g/sq-m Radio Required 4-Channel Recommended Engines .25 - .32 cubic in (4.1 - 5.2 cubic cm) 2-Stroke .20 - .26 cubic in (3.3 - 4.3 cubic cm) 4-stroke
Special notes about electric from Dave: This model makes an excellent electric conversion and is perhaps the most popular one of all time. Super light weight, large as or even larger than most 40 size trainers. The only lighter weight 40 size trainer on the market is the Radical RC Intern 66.
Setup and Performance Chart
Motor
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM
Est. Top Speed
Himax 3516-840
3
11x8
26.2
295
7,500
57
41
970
46
Himax 3516-1130
3
10x7
36.6
412
9,920
66
50
1294
51
Himax 3522-990
3
11x7
37
416
8,770
58
54
1405
51
Himax 3522-990
4
10x5
35.7
536
12,310
58
64
1683
54
Himax 3528-1000
3
12x6
44.5
501
8,690
49
64
1698
52
Himax 3528-800
5
10x5
31.4
589
12,900
61
71
1865
57
Himax 3528-1000
4
11x5.5
51.4
771
11,660
61
85
2453
60
Himax 5018-530
5
12x8
30.5
572
8,560
65
76
2050
59
Himax 5018-530
5
13x8
38.5
716
8,210
62
93
2614
62
Estimates based on manufacturers provided constants using E-Calc. High Quality 2100-3000mah used as trial cell in calculations. Presumed model weight of 76oz. @3 cells (added oz for higher cell counts). Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of battery, ESC, and many other factors.
TEMPROARILY OUT OF STOCK, MANUFACTURER BACK ORDER, NO ETA AT THIS TIME SORRY
This FDK (formerly Sanyo) AA 1650 Multiplex pack is the only way to go when replacing your weak factory pack. 7.2 volts and 6 cells just more bang. Comes without plug, reuse your old plug, direct solder or select optional Multiplex transmitter connector below. No thermal fuse in these packs.
Maintenance charge and maximum form charge rate for this pack is not to exceed 100mah. See chart at top of category page for charging recommendations.
Form charge on factory wall charger only, not to exceed 100mah. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.
 "Old School Model Works German Sunday Fighter Heinschmitt Kit")
 "RRC K6 Series 3000 18.5V 5S 65C")
 "Robart Small Pressure Tank")
 "Radical RC Quick Wing 12mm")
 "Hitec HS-5065MG Micro Digital Servo")
 "A123/LithiumWerks Life Nano Phosphate 2S 2P 5000mah Receiver Pack")
 "Sig 4 Star 60")
 "Radical RC 700mAh AA NiCad 9.6V 8-Cell Airtronics Stylus/Futaba FG TX Pack")
 "Himax HC5018-530 Series Outrunner Motor")
 "RRC K6 1800 18.5V 5S 65C")
 "Slow Stick Canard Mounting Kit")
 "Himax 2025 4200KV Brushless Direct Drive")
 "AquaCraft Grimm Racer 4S 4200 14.4V")
 "Himax HC3528 Outrunner 1000 KV")
 "RRC K6 Series 7.4V 2S 2200mAh 65C")
 "#2 x 3/32\" Ply Fender Washer 12-Pack")
 "RRC K6 Series 16,000mAh 22.2V 6S")
 "Sodium Na-Ion Battery #18650 7.2V 1500mAh 2-Cell Pack")
 "N-700-AAC 700mAh AA NiCad Single Cell Button End")
 "Old School Model Works Minuette Kit")
 "Sig Kadet LT-25")
