Use for it's heat sink feature, also adapts 20mm motors into 300 brushed motor fan housings such as the stock EDF-55 and EDF-64 housings or any other housing intended for a S300 sized brushed motor.
DISCONTINUED, WHILE SUPPLIES LAST, CLOSEOUT, SALE IS FINAL
Use between heat sink and motor for better thermal contact. Due to surface imperfections, the heats sink is usually only touching the motor case in a few locations. The balance of the area is filled with a thin film of air. The compound is designed to fill this gap and conduct heat more rapidly than air. When you heat sink is in better contact, your motor will run even cooler. The compound is not electronically conductive. Use in a think layer, the ideal is fill the would-be air gap, not to hold the sink off the motors surface.
Star mount fits most 28mm outrunners. Fits our Maytech 2830 and 2836 series motors and most other imported motors in this size class using similar looking star mounts. Motor bolt holes are .625" (15.8mm) on center for one pair and .730" (18.54mm) on center for the other pair. Outside holes are 1.375" (35mm) on center. 1/8" Thickness, overall OD 1.870" (47.5mm) 3D printed solid ABS part. Center hole .400" (10mm).
Getting an electric power system to run cool and stay aligned starts with the right mount. This category gathers motor mounts and heat sinks sized for the 10mm to 28mm motors common in park and sport electric setups, covering both outrunner and inrunner styles.
Mounts for Outrunners and Inrunners
For outrunner motors, options include the Motor Mount Star for 28mm cans and custom outrunner mounts, while the 20mm inrunner adapter fits inrunner motors into brushed fan housings and gearboxes.
Heat Sinks and Combination Parts
Keeping temperatures in check, GWS 12mm heat sinks such as the Large and the 50XC design slip over compatible cans. The Fox Lite combination piece pairs a 12mm mount and heat sink in one part for a tidy install. Pairing a heat sink with a mount helps pull warmth away from a motor that works hard on climbs and vertical maneuvers.
Match a mount to your motor diameter and mounting style using the listings below.
 "Himax Motor Radial Mount for HC28xx Series Motors")
 "GWS 20mm Heat Sink / Adapter to S-300 Fan Housings")
 "Motor Mount Plate for Fun Jet Ultra")
 "Heat Sink Compound 1.5g")
 "Motor Mount Star 28mm Outrunners")
