Fits Himax 35 series outrunners and many others. Motor plate is drilled for 4 bolt pattern of 1" (25.4mm)diameter. This is a most common mounting pattern in motors of this class such as Himax 35XX Series and many others (does not fit AXI 28XX motors). Standoffs provided in 4 different lengths to aid your setup. Measurements provided so you can figure out spacing. Note, if motor is mounted inside front plate, it's thickness does not add to motor spacing off firewall. High impact plastic base plate supports ends of standoffs against firewall to a solid and rugged mounting system.
Fits motors with 1" (25.4mm) mounting spacing Max motor length- 53mm Max motor diameter- 35mm for Outrunners, 36mm for regular motors 4 sets of rods included lengths; 12.65" (32mm), 1.655" (42mm), 1.892" (48mm) & 2.125" (54mm) Font plate thickness: .117" (3mm) Rear plate mounting space: .140" (3.5mm) Weight- 1.6 to 1.8 oz. Includes all necessary hardware
Himax Radial Mount for HC50XX Series Outrunner Motors.
SKU Number: MPIHC50-12
Outrunner Mounts for Brushless Motors
Mounting a brushless outrunner securely is the first step toward clean, vibration-free power, and this category gathers the mounts used to fasten outrunner motors to an RC airframe. The selection covers several sizes so you can match the mount to the motor case and the firewall or stick it attaches to.
Stick and Stand-Off Mounts
The GWS stick motor mount fits brushless motors in the 28 to 38mm range and suits lightweight park flyer builds, while the stand-off mount for 35mm outrunners holds the motor away from the firewall for cooling clearance.
Sizing Your Mount
Brushless motor mounts are offered in medium, large, and extra large versions to match common outrunner case diameters, and a custom outrunner mount option covers less common fitments. Choosing a mount that matches your motor's bolt pattern keeps the prop shaft true and reduces stress on the airframe.
Review the mounts below and match one to your motor before ordering.
 "Stand Off Motor Mount for 35mm Outrunners")
 "MPI Maxx Motor Heat Sink 36mm")
 "Mpi Maxx Motor Clam Shell Mount & Heat Sink 36mm")
 "Mpi Himax Motor Radial Mount for HC35xx Series Motors")
 "Himax Radial Mount HC50XX Series Outrunner Motor")
