INSTA-SET(TM) is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET(TM) in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET(TM) significantly enhances a joint's strength. For difficult to bond materials, INSTA-SET(TM) can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET(TM) is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
USES:
All Cyanoacrylates
DIRECTIONS:
After joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set(TM) to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set(TM) to reinforce their strength. Insta-Set(TM) can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set(TM) is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.
AVAILABLE SIZES:
BSI-151 (Pump Spray): 2 Fl. oz (60 ml)
BSI-155 (Aerosol): 6.75 Fl. oz. (200 ml)
BSI-152 (Refill): 8 Fl. oz. (240 ml)
MADE IN THE USA
 "INSTA-SET(TM) Accelerator")
