|
|
Radical RC TX Stand. Works with TX's that have bent U shaped metal handle. Machined from solid aluminum, your not going to bust it. SKU Number: RRCA427
|
|
|
|
|
2 position short switch used throughout the Futaba line of radios. May be useful in other radios or for other applications. Comes as you see it, no nut. Solder in yourself. Two-Position Switch - ML-1AFSP Short Solder-On Switch (UBT3339) SKU Number: FUTUBT3339
|
|
|
|
|
This is a RAD new item. Radical RC Anodized Aluminum Joy Stick Handles. Aftermarket joy stick replacement handle set. Make your radio stand out from the crowd. Colorful and tactile feedback with serrated tips. This one is Futaba, Hitec style. (Note Spektrum DX6 & DX6I uses the this part) SKU Number: RRCCHFJ
|
|
|
|
|
Radical RC Anodized Aluminum Joy Stick Handles. Aftermarket joy stick replacement handle set. Make your radio stand out from the crowd. Colorful and tactile feedback with serrated tips. This one is JR/Specktrum TX's. (Pick Futaba/Hitec type for Spektrum DX6 & DX6I) SKU Number: RRCCHJR
|
|
|
|
|
Hitec factory TX neck strap. SKU Number: HRC58311
|
|
|
|
|
High quality clasp, comfortable and fully adjustable. Genuine factory part. OUT OF STOCK SKU Number: FUTFTA18
|
|
|
|
|
Our Deluxe TX balance will work with Futaba, JR and Spektrum TX's. Should work with any TX that has a metal eyelet. All hardware included, even a filler so bolt stays centered in your eyelet. Adjustable for horizonatal and vertical eyelets along with about 1/2" adjustment for best balance. SKU Number: RRCDLXTXBAL
|
|
|
|
|
3 position long switch used throught the Futaba line of radios. May be useful in other radios or for other applications. Comes as you see it, no nut. Solder in yourself. ML-1BFLP SKU Number: FUTUBT3442
|
|
|
|
|
3 position short switch used throught the Futaba line of radios. May be useful in other radios or for other applications. Comes as you see it, no nut. Solder in yourself. ML-1BFSP SKU Number: FUTUBT3441
|
|
|
|
|
2 position long switch used throughout the Futaba line of radios. May be useful in other radios or for other applications. Comes as you see it, no nut. Solder in yourself. FUTM3678 Two-Position Switch - ML-1AFLP Long SKU Number: FUTUBT3347
|
|
|
|
|
Trainer Switch - ML-1FLP Long Solder-On Switch (UBT3443) TEMPORARILY OUT OF STOCK SKU Number: FUTUBT3443
|
|
|
|
|
Use to replace diode in Futaba transmitters (or any others) with a auto resetting breaker. Allows charge and discharge up to 3 amps as well as volt checking of the TX battery through the TX charge port. Exact same rating as more expensive Futaba part (FUTM4000) at a much more reasonable cost. A better option than jumping the diode as this part will protect against melting the pack down by shorting through the charge port as well as the diode did while not interfering with normal service of the pack. This is a moderate skill project. You need to be able to identify your diode, desolder it and solder this component in it's place. No instructions are provided. If your radio is in warranty, this will void it (as would jumping the diode). Note, this cannot be used on a Futaba 9Z. SKU Number: RRCPSBKR
|
|
|
|
|
Our Deluxe TX balance will work with Futaba, JR and Spektrum TX's. Should work with any TX that has a metal eyelet. All hardware included, even a filler so bolt stays centered in your eyelet. Adjustable for horizontal and vertical eyelets along with about 1/2" adjustment for best balance. Link to see all Radio Upgrades. SKU Number: RRCDLXTXBAL
|
|
|