The PowerBox PIK range of connectors exploits modern Hot-Melt technology to combine proven connector systems used in modelling applications.

All the joints in our cables are soldered on our premises, and subsequently checked by a second staff member for correct polarity and quality of workmanship. The connector is then placed in a specially made injection-moulding tool, in which it is encapsulated with a special plastic at a temperature of 220ºC and a pressure of 10 bar.

This process permanently seals the soldered joints as well as acting as a strain relief. Neither mechanical stress nor environmental influences - such as damp or heat - can have any adverse effect on this connection. The plastic we use is resistant to vibration, oxidation, acids, alkalis and fuels, and is temperature-resistant from -30ºC to +90ºC.

The cables we supply include types with different conductor cross-sections, adapters, charge leads and three-core servo leads. Cables with a cross-sectional area of up to 1.0mm have PVC insulation, while the 1.5mm and 2.5 mm types feature silicone insulation.

We are anxious to protect you, our customers, from plagiarists, and for this reason we have registered the design and other quality characteristics of these products in the Design Register of the Deutsches Patent- und Markenamt (German Patent and Brand Office).

(Reference No. DE 40 2010 000 949.5, Rights Holder: PowerBox-Systems GmbH)

Product Introduction

Linear High Precision Regulator system (No switching Noise generated)Digital Controlled Electrical (MOSFET) Power Switching System.

3steps Low voltage sound and visual warning indicators.

The DYMOND DIGI SWITCH is an electronic switch with a powerful integrated BEC for use with two-cell LiPo battery packs.

The DIGI SWITCH provides a low voltage control for the connected LiPo pack, that outputs a visual and audible signal as the battery pack gets empty.

Linear BEC without any switching noise

3-stage low voltage warning

Extremely low power consumption in the off state (only 0.047 mAh)

Specifications

Nominal input voltage: 7.4V, 2-cell LiPo, max. > 1

Output voltage: 6V

Rated current: 5.5A continuous current at then 5V output voltage

Self power consumption

Off: 0.047 mAh

Off: 0.047 mAh

On mode: 3.9 mAh

With signal: 21 mAh

Dimensions: 59 x 20 x 21 mm

Dimensions for mounting hole: 17 x 46 mm, 19 mm mounting depth

Weight: 19.8g

Low voltage warning

Below 7.0V: Slow sound and flash frequency

Below 6.6V: Medium Speed sound and flash frequency

Below 6.0V: Rapid Tone and flash frequency

1. When the switch is on/off, press and hold the button for about 1 second.

2. Regulator built-in digital electronic switch.

3. When the voltage drops, it will be notified by LED lights and sound.

Himax Brushless motors are manufactured to high standards for the discerning modeler. Designed for light-weight, high efficiency, and durability these Himax motors are sure to make today's radio controlled models perform. Please read the entire operating manual to ensure correct functionality and best performance. The HA2825 series motor is made for small to medium size models weighing 32 to 64 ounces.

Features:

High Efficiency - High Power - Light-weight - Replacement for 500-600 Motors

Specifications: 

• Weight: 138g, (4.9oz), Motor Only 
• Max Power: 400W, (This is dependent on several factors) 
• Max RPM: 50,000 RPM 
• Diameter: 28mm, (1.10") 
• Length: 48mm, (1.89") 
• Shaft Diameter: 4.0mm, (.1575") or 3.17mm (.125") 
• Mounting Screw Thread: 3.0mm, max depth 4.0mm, on 16mm, (.625") bolt circle 
• Maximum Case Temperature: 100o C, (212o F)

Electrical Specifications:

• HA2825-2300 Kv = 2300, Rm = .078, Io = 0.5
• Efficient Operating Current = 4-23A HA2825-2700 Kv = 2700, Rm = .041, Io = 0.8
• Efficient Operating Current = 8-30A HA2825-3600 Kv = 3600, Rm = .025, Io = 1.4
• Efficient Operating Current = 15-35A HA2825-4400 Kv = 4400, Rm = .017, Io = 1.9
• Efficient Operating Current = 20-50A HA2825-5500 Kv = 5500, Rm = .011, Io = 2.2
• Efficient Operating Current = 25-60A

Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.

Himax/Maxx Products Warranty Info.

DISCONTINUED; LAST OF HA2825 SERIES; SOLD AS-IS; NON-WARRANTY; NO RETURNS; NEW IN HARD CLEAR BOX.

The Dash One-Meter from Hobby People is the easy way to get flying in a hurry. It is completely ready to fly, and easy to quickly assemble. Great Performance! Dash 1-M's power system is "just right". The Li-Po battery provides more run time with less weight than a typical NiMH battery, thus providing longer run times and consistent power to the brushed motor. Dash 1-M climbs out with authority and makes high speed passes with great stability. The wing and tail are molded from foam with an outer skin, making them resistant to "hangar rash", and can be easily repaired with foam safe glue. Simply fun to fly, fast at full throttle, easy to fly at 1/2 throttle, and glides power-off giving it a wide speed envelope and fun flying characteristics.

NEW IN BOX, SOMEWHAT SHELF WORN, LAST ONE LEFT, DISCONTINUED, SALE IS FINAL, AS-IS NON-WARRANTY

Assembles in minutes!  

Amazing features: 

• 1-Piece undercambered wing
• Bolt-on tail section for quick assembly
• Easily dismantled for storage in the original box
• Includes: Folding Propeller & spare
• Includes: Proportional ESC for throttle
• Includes: Li-Po battery, 2S 1000mAh
• Includes: Li-Po balancing battery field charger (12V Input)
• Includes: Transmitter, 27mHz 4-Channel; 2-Stick; Radio
• Extras: Rubber band for the wing retainer (probably need replaced due to age), ribbon to check wind direction

Requirements: 

• Transmitter requires 8AA alkaline batteries (not included) 

Specification:

Wing Span: 39.4in / 1m
Wing Area: 175 sq. in. / 11.29 sq. dm.
Length: 25in / 635mm
Flying Weight: 13.75oz / 390g
Wing Loading: Wing loading is 34.53g/sq.dm. / (11.3 oz/sq. ft.)
Brushed Motor: 400 size
Brushed ESC: 10amp

Photo Credit & Review: Model Airplane News