| |
Maxi-Cure(TM) Extra Thick Super Glue, CAMaxi-Cure(TM) extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE(TM) is the best choice for plastic model assembly. When used with INSTA-SET(TM), it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE(TM) bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE(TM) or any other adhesive. It also is best for bonding the tires for R/C cars. MAXI-CURE(TM) has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE(TM) is usually the least expensive option for this application. Works Best On:- Soft Wood
- Hard Wood
- Glass & Metal
- Fiberglass
- Ceramics
- Hard Plastics Rubber
- Laminating
- Reinforcing
Works Good On: - Balsa Wood
- Water-Resistant
DIRECTIONS: Unscrew top from nozzle. For finer applications, use the extender tip. Apply Maxi-Cure(TM) CA to one side of the parts being joined, then hold them tightly to- gether for 10-20 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set(TM) accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220? F. Soak extender tip in acetone for cleaning. AVAILABLE SIZES: BSI-111: 1/2 oz (14.2 g) BSI-112: 1 oz. (28.4 g) BSI-113: 2 oz. (56.8 g) BSI-114: 8 oz. (227 g)
MADE IN THE USA
SKU Number: BSI111
|
 "Maxi-Cure(TM) Extra Thick Super Glue, CA")
