Sonic Tronics Special Design glow plugs for Non OS engines. Perfect for your Enya, Saito and HP engines. (Caution wrong plug can cause cylinder head damage OS 4 strokes.)
The PERS is a very tiny receiver-actuated on/off switch. It plugs into one of your receiver channels and lets you turn a device on/off using a stick, switch, or knob on your transmitter. The PERS performs the operation equivalent to a servo moving a mechanical switch back and forth, but in a much smaller package, and with no moving parts! The PERS will operate with any receiver running on 2-6V and can switch on/off pretty much any device up to 3A of current. The PERS is perfect for lights, glow plug drivers, motors, smoke pumps, rocket igniters, solenoids, relays, and whatever else you can think up. Wired correctly, it could be used to trigger cameras or other electronic devices. The PERS weighs just 0.3g, not including the 6" output wires (if left full-length these wires weigh another 0.3g).
If you don't mind doing a bit of soldering, the PERS can be easily reversed and assigned a fail-safe setting. The PERS was designed to use the power from your receiver battery, but it can also be configured to use a separate battery, up to 20V. Take a look at the PERS instructions (link below) for reverse/fail-safe settings and wiring diagrams.
The PERS is available with 4 different types of servo connectors to accommodate the various micro receivers available today. Scroll down to view the different options and cart buttons. Packing Note: PERS's ordered in 1pc quantities will come in individual packages. 3 and 10pcs quantities may be supplied in one package with one set of instructions.
Choose your connector option:
PERS with standard Universal/JR servo connector
This model comes with a standard universal/JR servo lead which will plug into any brand receiver which uses standard servo connectors. The servo lead is 3" of 28AWG wire in Futaba colors, but with a universal connector.
PERS with 1.00mm servo connector for Spektrum AR6400 receivers
This model comes with a 1.00mm servo lead that will plug into the Spektrum AR6400 and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in JR colors. The PERS is ten times lighter than the AR6400 receiver so it won't noticably affect the weight of your model. In one of the images below you can see the PERS plugged into an AR6400 receiver controlling a high-brightness LED.
PERS with 1.25mm servo connector for Futaba R616FFM micro receivers
This model comes with a 1.25mm servo lead that will plug into the Futaba R616FFM receiver and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in Futaba colors. The PERS is 20 times lighter than the R616FFM receiver so it won't noticably affect the weight of your model.
PERS with 1.50mm servo connector for Spektrum AR6300 receivers
This model comes with a 1.50mm servo lead that will plug into the Spektrum AR6300 and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in JR colors. The PERS is six times lighter than the AR6300 receiver so it won't noticeably affect the weight of your model.
Specs:
Receiver Power: 2.0-6.0V
Receiver Current Draw: <1mA (LED off), 5mA (LED on)
Maximum Continous Switch Current: 3.0 amps
Maximum Momentary (<2s) Switch Current: 4.0 amps
Maximum Switch Voltage: 20.0V (see instructions for using a separate battery)
Circuit size not including wires: 7.7 x 6.2 x 3.4mm (0.30 x 0.24 x 0.13in)
Specs - Universal Connector
Weight without output wires: 0.85g (0.030oz)
Weight with 6" output wires: 1.14g (0.040oz)
Overall length with 6" output wires: 23.7cm (9.25in)
Receiver connection: Universal/JR 0.1" connector, 3" 28AWG Futaba color wire
Specs - All Other Connectors
Weight without output wires: 0.30g (0.011oz)
Weight with 6" output wires: 0.59g (0.021oz)
Overall length with 6" output wires: 18.0cm (7.0in)
The Robinhood 25's bigger brother, now better than ever.
The Robinhood 80 is based on the original kit marketed by World Engines in the 1980's, but we have updated it significantly to more closely resemble the Curtiss Robin built back in the 1920's.
While still a fun-scale design, it is easy to build and retains all of the great flying characteristics that make a good sport airplane. In the air, the Robinhood 80 is a true barnstormer and is at it's best when cruising on a lazy afternoon or performing some gentle aerobatics.
Power can be from 20cc gas, .90-1.50 glow or an equivalent electric setup. We've designed the fuselage with a built-in hatches so you have quick access to your fuel (or batteries) and and radio system.
All of the formers, ribs, tips and other specialty parts come laser-cut. These pieces are engineered to fit together with a minimum amount of tools and/or jigs to align properly them.
The fuselage can be built as an inline version (as shown) or with a slightly shorter nose if you're rather install your own radial engine for that classic look.
Utilizing our unique WEB-LOCK construction, you can build both wing panels straight and true - with a minimum amount of fuss. Both wing panels are removable for easy transportation and storage, attaching to the fuselage with functional struts and a few bolts.
Included in each Old School Model Works kit are full-sized rolled plans, a printed construction manual, pre-bent main gear, hand-selected balsa and ply woods, and a premium hardware package from brand-name, USA manufacturers (DuBro, Sonic-Tronics, and others) to guarantee the best quality.
What's more is you can cover and finish your Robinhood 80 like you want, rather than being stuck with a "me-too" offering that look exactly the same as the others at your local field.
Specifications:
Wingspan: 80 inches
Wing Area: 1120 sq inches
Length (airframe only): 58 inches
Weight: 4.5 lbs. (framed), 8-10 lbs.(rtf)
Radio: 4 channel system:
Power:
o Glow (.90-.1.50 engine, 8-12 oz. ounce tank, fuel tubing)
o Gas (20cc engine, 8-12 oz. ounce tank, fuel tubing)
o Electric (equivalent brushless motor, ESC, and LiPo batteries)
Features of the Robinhood
80 Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
Pre-Bent Main Gear
As is the case with all Old School Model Works' kits, pre-bent main gear is included.
WEB-LOCK Construction There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Plug-in wings
An 80" wing is a hassle to transport. So we've re-engineered the RH80 with plug-in wing panels. Upper and lower Hatches An upper hatch (for tank and throttle access) as well as a lower hatch (for radio access) are built-in.
Wing Struts
Adding extra strength and scale looks, the RH80's struts are easy to make and quick to attach to the fuselage.
Additional items needed to complete the Robinhood 80 kit:
o Propeller
o Engine/Motor mount & mounting hardware
o Servo extensions and "Y" sharness (for ailerons)
o Pushrods (two 5" for ailerons, two 30" for elevator & rudder, one 12" for throttle if glow powered)
o Clevises for the pushrods (8 if electric, 10 if glow).
o 2 - 5" diameter wheels o 1 - tailwheel assembly
o Covering
Due to high demand, please allow 1-2 weeks for shipment, thank you!
An advanced trainer that's so much fun, it's SPOOKY!
When we designed the GHOST, we envisioned a trainer that could do more than the typical boring trainer. The GHOST needed to offer you the opportunity to train, advance, and even have fun - all with the same airframe. And that's just what we've accomplished.
To start, the GHOST has been designed as an easy-to-build model with a wealth of laser-cut parts. Actually, most every part used in the GHOST's construction is already pre-cut for you out of hand-selected lite-ply and balsa woods.
The wing is a flat-bottomed airfoil which is a cinch to build using our exclusive laser-cut WEB-LOCK construction that not only gives you proper rib spacing, but also holds each rib at a true 90? to the building surface, without the need for additional tools.
The fuselage is also an easy build as we've engineered the fuselage sides with slots to lock in each former at the right spot - and angle. Also, we've integrated our Multi-Size Servo mounts into the fuselage sides which makes mounting the rudder, elevator, servos a breeze (and throttle - if using glow).
<
Power can come from either glow or electric powerplants and there's a large, magnetic, top hatch which gives you quick access to the batteries and/or fuel tank.
At first, the GHOST might appear to be just a Good Honest Old School Trainer. But as they say "Wait, there's more!".
Flaps are included - a first for an OSMW kit. These are quite effective and can slow the GHOST to a crawl in the air. Choose to install them during the initial build, or they can be added at any other time - even after you've flown the GHOST for a while!
The GHOST's tall and wide main gear makes taking off from paved or grass surfaces quite easy. Throttle up, and you'll find the GHOST takes to the air in a surprisingly short rollout.
At lower throttle settings, the GHOST is slow and stable in the air, making it easy for a new pilot to learn how to navigate the skies. Throttle up the GHOST a bit and you'll start to open up more capabilities, including some fun barnstorming. At even higher speeds, the GHOST can perform a surprising amount of aerobatics to wow the crowds.
And all of this with the same airframe that many would write off as "simply a trainer".
Even when the wind gets a bit gusty, the GHOST's smooth flying characteristics will give you the confidence you need. When it comes time to land, simply lower the throttle and gently glide down to the runway. Again, no surprises, which is just what you want in any design.
And after you've mastered flying the GHOST, add to it's capabilities by adding in one of our Fun Fly Bay kits (available separately). Once assembled, these kits will bolt up through the bottom of the GHOST's fuselage. Like the GHOSTS's flaps, these kits can be added (or swapped out) at any time - even after you've flown for a while. For more information on these kits, check out the right hand column.
Specifications: Wingspan: 62 inches
Wing Area: 675 sq. inches
Length (airframe only): 42 inches
Weight: 4.5-6 pounds RTF
Radio: 4 to 6 channel (4-7 standard sized servos)
Power:
o Glow (.30-.46 glow)
o Electric (450+ watt, 60+ amp ESC, 3S to 4S LiPo)
Features of the GHOST:
Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
WEB-LOCK Construction:
There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Front Hatch:
This top hatch gives you plenty of room to access the battery and/or fuel tank.
Flaps Included:
Flaps can be installed during the initial build, or added after you've flown for a while - your choice.
Additional items needed to complete the GHOST kit:
o Propeller
o Engine/Motor, mount & mounting hardware
o Radio system with 4 to 7 servos (stardard-size)
o 2 "Y" servo harnesses (one for ailerons, one for flaps)
o Pushrods (28" for elevator and rudder, 9" for throttle, 6" for the ailerons and flaps)
o Clevises for the pushrods.
o Wheels: two 3" main wheels, tailwheel assembly
o Covering (typically 2 rolls - more needed for higher complexity finishes)
Make It A Combo: GHOST Fun Fly Bay Kit (Drop)
Add this optional accessory kit to your GHOST to open up your Fun Fly Bay to Drop capabilities. Once assembled, it bolts into the fuselage and gives you the ability to RESPONSIBLY drop parachute men, candy, and other fun-fly items.
o Ready to assemble kit
o 37.5" cubic inch bay capacity - 5" x 2.75" x 2.75".
o Door mechanism is protected (separated) from the bay.
o Self-contained unit that bolts into the GHOST with two bolts.
o Includes installation hardware, hinge material and door mechanism.
o Also includes 1 parachute action figure.
o Plug your servo into a spare channel and it's ready to go.
o Requires a standard-sized servo and long servo arm (not included).
Due to high demand, please allow 1-2 weeks for shipment, thank you!
Due to high demand, allow at least 2 weeks or more for shipment.
 "Glo-Devil R/C 4 Stroke for Non OS")
 "Hansen Hobbies PERS V2- Pico Electronic Receiver & Accessory Switch")
 "Old School Model Works Robinhood 80 Kit")
 "Old School Model Works Ghost Kit")
