10" machine made Silicone pigtails are available in our connector section at lower cost if they can meet your needs.

Note, for a happy life, get your sex right. Servo and battery ends are "MALE", RX's and Y harness receptacles are "FEMALE". When the pins are hidden, connectors are gendered by the shell. Just remember as an assembly, a servo plug fits inside an RX or Extension therefore it's male.

TEMPORARILY OUT OF STOCK 

If you don't mind doing a bit of soldering, the PERS can be easily reversed and assigned a fail-safe setting. The PERS was designed to use the power from your receiver battery, but it can also be configured to use a separate battery, up to 20V. Take a look at the PERS instructions (link below) for reverse/fail-safe settings and wiring diagrams.

The PERS is available with 4 different types of servo connectors to accommodate the various micro receivers available today. Scroll down to view the different options and cart buttons. Packing Note: PERS's ordered in 1pc quantities will come in individual packages. 3 and 10pcs quantities may be supplied in one package with one set of instructions.

Choose your connector option:

PERS with standard Universal/JR servo connector   

This model comes with a standard universal/JR servo lead which will plug into any brand receiver which uses standard servo connectors. The servo lead is 3" of 28AWG wire in Futaba colors, but with a universal connector.

PERS with 1.00mm servo connector for Spektrum AR6400 receivers   

This model comes with a 1.00mm servo lead that will plug into the Spektrum AR6400 and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in JR colors. The PERS is ten times lighter than the AR6400 receiver so it won't noticably affect the weight of your model. In one of the images below you can see the PERS plugged into an AR6400 receiver controlling a high-brightness LED.

PERS with 1.25mm servo connector for Futaba R616FFM micro receivers

This model comes with a 1.25mm servo lead that will plug into the Futaba R616FFM receiver and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in Futaba colors. The PERS is 20 times lighter than the R616FFM receiver so it won't noticably affect the weight of your model.

 PERS with 1.50mm servo connector for Spektrum AR6300 receivers

This model comes with a 1.50mm servo lead that will plug into the Spektrum AR6300 and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in JR colors. The PERS is six times lighter than the AR6300 receiver so it won't noticeably affect the weight of your model.

Receiver Power: 2.0-6.0V

Receiver Current Draw: <1mA (LED off), 5mA (LED on)

Maximum Continous Switch Current: 3.0 amps

Maximum Momentary (<2s) Switch Current: 4.0 amps

Maximum Switch Voltage: 20.0V (see instructions for using a separate battery)

Circuit size not including wires: 7.7 x 6.2 x 3.4mm (0.30 x 0.24 x 0.13in)

Specs - Universal Connector

Weight without output wires: 0.85g (0.030oz)

Weight with 6" output wires: 1.14g (0.040oz)

Overall length with 6" output wires: 23.7cm (9.25in)

Receiver connection: Universal/JR 0.1" connector, 3" 28AWG Futaba color wire

Specs - All Other Connectors

Weight without output wires: 0.30g (0.011oz)

Weight with 6" output wires: 0.59g (0.021oz)

Overall length with 6" output wires: 18.0cm (7.0in)

Receiver connection: 1.00mm / 1.25mm / 1.50mm, 1" 30 AWG wire

Each package includes two complete push rod systems, so you can set up two control surfaces--such as the elevator and rudder. Everything you need is included, and the parts are designed to work together for simple, clean installation.

Each set contains:

• 2 pushrods with a pre-bent 90? end, ready to use
• 2 pushrod housings that guide the rods and stop them from bending
• 2 Micro E/Z Links for attaching to your control horn
• 2 Mini E/Z Connectors for attaching to your servo arm and making easy adjustments

These components allow for smooth movement with very little friction. They also make it easy to fine-tune your control surfaces so your airplane responds the way you want it to.

The Micro Push Rod System is available in four different weights to fit a wide range of aircraft sizes:

• #847 - 3.2 grams per set
• #852 - 4.6 grams per set
• #922 - 5.7 grams per set
• #941 - 18 grams per set (for slightly larger electric planes)

This system works great on:

• Indoor flyers
• Small park flyers
• Slow flyers
• Foamies and EPP aircraft
• Lightweight scratch-built planes

Installation is quick and beginner-friendly. The housings glue easily to your model, and the connectors make attaching and adjusting your pushrods simple.

Proudly Made in the USA, the DU-BRO Micro Push Rod System provides a dependable and lightweight way to get precise control from your electric RC aircraft.

This item qualifies as a Rod Stock Item, read below:

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. Weight is in grams per meter, as per the manufacturer documentation, no guarantees on weight. Find other qualifying items to mix and match to meet the 6PC Minimum Purchase Requirement:

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634