Futaba Extension Harness 18", 24", 30", 36" or 40". Futaba Style servo extension. 22 gauge heavy duty wire. Select length desired below. Please refer to photo of above extensions to see similar leads.
Our Comet captures all of the jet-age looks and excitement of the sleek 1950's design it's based on. With the included jigs, this delta wing can easily be built by those with experience in constructing built-up kits. Please note that this is NOT a beginner's kit - it requires building and flying experience to be successful.
Flying the Comet is a blast. It's not overly quick and has pleasing flight characteristics that make it fun to fly. Even at low speeds it is well behaved and has no surprising tendencies. The Comet can be powered with either an electric or glow powerplant. We've designed the fuselage with built-in hatches so you have quick access to either your batteries, fuel tank & radio system.
Specifications: Wingspan: 39.5 inches Wing Area: 470 square inches Length (airframe only): 32 inches Weight: 3 - 3.5 pounds Radio: o 4 channel system (with elevon mixing) o 3, 40-70 in./oz. servos for elevons and rudder; o 1, 40-70 in./oz. servo for throttle (if using a glow engine) Power: o Electric: .25-sized brushless motor, 60amp esc, 3s lipo o Glow (.19-.30 engine, 4 ounce tank, fuel tubing) Features of the Comet A Retro, Delta Wing Flying the Comet is a blast. It gives jet-like looks and stability without being overwhelmingly fast. Stability at all speeds make it easy to fly and easy to land. WEB-LOCK Construction There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss. Premium USA Hardware Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality. Rugged Landing Gear We include sturdy, pre-bent main gear, steerable nose gear assembly, and wheel collars. The 1/8" diameter wire can absorb quite a bit of abuse for those no-so-good landings. Bottom hatch Held in place with thumbscrew, this hatch gives you easy access to batteries or fuel. Canopy Also included is a clear, pre-formed plastic canopy. Additional items needed to complete the Comet kit: o 4 channel radio and servos (elevon mixing is needed, so a radio with mixing is needed) o Propeller o Engine/Motor mount & mounting hardware o Pushrods (two 5" for elevons, one 18" for rudder, one 12" for throttle if glow powered) o Clevises for the pushrods (6 if electric, 8 if glow). o Three 3" diameter main wheels o Covering
Due to high demand, allow at least 2 weeks or more for shipment.
Did you ever get to see a Wright Flyer fly? Did you ever dream that someday you'd get to wiggle the wings on a Wright machine? I'm betting during all those many months of testing, planning, designing our famous Wrights went to bed wondering what it would be like. Then they did it. Now, you can do it. This conversion kit combined with the parts from two GWS Slow Stick slope glider kits (no longer available, discontinued by GWS) will produce a sport scale 1905 Wright Flyer. This model from the side view is scale having all the struts the original had. Omitted are all the flying wires and control cables. All the fiddly bits included on a perfect scale model (that break every time you land one) are gone. My intention was to design a model you could fly 10 times in a day if you liked and not once or twice a year for special occasions as you'd probably choose to do with a pure scale model.
Photo by SkyPielet
How does it work? If you look close you can see our unobtrusive elevator servo (we used a GWS Pico) on the canard support strut. This servo drives the top canard which in turn, drives the bottom canard through a simple transfer rod. The canards move up and down together on thier own individual pivots like the original 1905 flyer. The rudder servo is adhered to the bottom of the bottom wing with a Dubro Micro Push rod (1/32 wire in clear plastic tube) driving the rudder. The rudder moves like the original 1905, both together. Perhaps the most exciting feature is this model flys with real wing warping. The outside wing strut assembly has a servo hidden under the bottom wing driving a diagonal rod that appears to be a simple bracing rod in the scale location. Forget the Eindecker like wings, wouldn't it be gross if this model didn't turn by real wing warping? You're going to love this feature every time you show how it works.
How does it fly? I was amazed, after some initial hiccups working out the right setup. We've refined CG and throws until it flies more or less like you'd expect a trainer to fly. It is a bit draggy so you tend to fly with a middle throttle position most of the time and you will want to be comfortable flying with both hands as this design likes rudder inputs. However, you'll soon agree it flies like a trainer. Provided in the kit is the CG you need along with servo horn lengths, control throws and even exactly where to trim the canard for that first flight.
How does it build? This is not a normal kit, it's mostly nut and bolting with some foam trimming and fitting here and there a little gluing and some finishing (staining). If like me, your favorite ever childhood toy was an Erector set, you're about to feel young again! Now I know you hated those square nuts and slot head screws (I did) so we included all hex wrench driven button heads and ny-lock nuts. There is a surprising amount of aircraft ply in this kit. The main structure starts out as a 24"x24" section of 1/8" thick air ply (cuts slower on a laser) and it's packed tightly with many parts. Needless to say, there is a lot of laser cutting time here. It has the longest hardware list of any kit we've ever designed and the longest instruction set I've ever written including several drawings/templates. Ron, who built both of our in-house prototype models said he needs 3 work days to complete one. So, please plan enough time, it's very important to us that you actually finish it and get it flying. I want to hear the joy in your voice and see the pride on your face when you tell me about it at the next show.
Whats included? All the hardware needed that isn't already in the Slow Stick kits is included here. All fasteners are good quality allen head bolts with lock nuts. There are 88 washers and you can guess how many nuts and bolts.
What do you need to complete? Add 2 motors (max 2oz, 800-1200 KV), 2 stick type motor mounts, 2 ESC's, APC counter rotating prop set, electronics (2 each 6 gram servos, 2 each 20oz torque servos (we used HB-65's), and 1 each 3S battery 1800-2200mah. Extensions and Y's. For motors under 1000 kv, use 10-4.7 props, 1000-1200 kv use 10-3.8 props.
Light servo! Great for indoor and small park flyers where large throws are not used. Universal servo connector. Includes several servo horns, horn and mounting screws.
Specifications: Weight Advertised: 3.7g No BS* Weight: 4.625g Volt: 4.8~6V Speed: 0.12/60 degree Torque: 0.7kg/cm Dimension(mm): 19.8x8.0x22.5 Bearing: Plastic
Typical Advertised weights are without connector, wire, horn & screw. "No BS Weight" includes connector, horn and horn screw.
Our F3P biased servo horn used by many top competition pilots. 4 peices per sheet. Control Radius .750" (Equivelant to 1.5" spread servo horn). 7 Holes are offset in 5 degree steps starting at 5 degrees and ending at 35 degrees. Holes are precision drilled at .031 to be snug zero slop fit to common .032 pin control rod fittings and music wire. May be sewn and glued to many standard horns. Laser cut from .020 fiberlgass. Strong and light weight. I've never had a report of a broken horn. Same horn as provided in complete control horn sets above. Designed in conjunction with Scott Barnhart. SKU Number: RRCF3PBSH1FG
The new Sig Somethin' Extra has it all - good looks, incredible performance, Sig quality balsa and ply construction and every part in the kit is laser-cut!
This kit can literally be built as fast as the modeler can apply CA glue and accelerator. Fantastic flight performance using either 2-stroke or 4-stroke engines. The aerobatic capabilities of this model are virtually unlimited due to its thick airfoil section and very light wing loading. A perfect club contest airplane.
Kit Features: Balsa and Ply Construction, Pre-Cut Sheet Balsa Tail Surfaces, Durable Aluminum Main Landing Gear, Formed Tailwheel Wire, Molded Clear Plastic Canopy, Full Size Plans, Fast-Building 2 Piece Wing For Easy Transportation, Full Size Plans, Engine Mounts, Sig Easy Hinges, Pushrods, Complete Hardware Pack & Large Decal Sheet.
Wingspan: 51.5 in 1308 mm Wing Area: 614 sq in 39.6 sq dm Flying Weight: 4.25-4.75 lb 1928-2150 g Length: 48.25in 1226 mm Radio Required: 4 Channel, 4 Servos Recommended Engines: .40-.46 cubic in (6.6 - 7.5 cubic cm) 2-Stroke, .56-.65 cubic in (9.2 - 10.7 cubic cm) 4-Stroke
Special notes about electric from Dave: This model makes an excellent electric conversion. My first large electric was one of these on 20 1750FAUP Cells. Yikes, I'd love to do another one with modern packs! Here is how I'd do it. Yes, this is same chart as the 4 Star 40, similar weight and wing area. An under recognized yet excellent electric conversion model. Good weight to wing area. A little troublesome to get large NiMH packs into due to the wing tube. However, with Lipo's it's super easy to fit the pack. Below are my suggestions for a range of practical power systems.
Setup and Performance Chart
Motor
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM
Est. Top Speed
Himax 3522-0990
3
12x6
41.7
469
8,470
62
48
1377
53
Himax 3528-800
3
12x10
37.4
421
6,950
66
54
1260
56
Himax 3528-800
4
11x7
36.6
549
9,770
65
68
1674
61
Himax 3528-1000
3
12x6
44.5
501
8,690
49
64
1490
54
Himax 3528-1000
4
11x5.5
51.4
771
11,660
61
85
2177
64
Himax 3528-1000
3
12x6
44.5
501
8,690
49
64
1490
54
Himax 5018-530
5
12x8
30.5
572
8,560
65
76
1839
63
Himax 5018-530
6
12x8
40.5
911
9,930
75
104
2766
73
Estimates based on manufacturers provided constants using E-Calc. High Quality 2100-3000mah used as trial cell in calculations. Presumed model weight of 76oz. @3 cells (added oz for higher cell counts). Actual performance may vary depending on components, accuracy of data provided by manufacturer, quality of battery, ESC, and many other factors.
This material shrinks easily with your covering shrink gun, lighter or other heat source. After shrinking, this higher quality tube stays flexible keeping your strain relief plans intact. Shrinks about 50%. 1/16 and 3/32 sizes are most popular for individual servo and park flier pack wires. 1/8" for strain relief on 2 pole 22 gauge battery pack wire, larger sizes for larger wire. Shown at right is 3/8" for locking together servo connectors you won't be able to easily inspect later. Measurement is inside diameter. Very economical to keep plenty of this material on hand. You'll find many uses, we even use the smallest size for wheel collars on some of our kits! Sold in multiples of 3' lengths. SKU Number: WS03.2B
This compact controller can keep it's cool even during the most extreme 3D maneuvers. Talon 25 is intended for use in most 400-size helicopter setups running up to 6S LiPo or your favorite 3D foamy that pulls up to 25 amps. Despite it's size, it boasts an impressive 8 amp peak/3 amp continuous BEC, keeping even the most draining servos at ease. Talon 25 also offers Castle's industry-leading helicopter functions, not to mention easy programming using the Castle Link USB adapter (coupon for free Castle Link included). Talon 25 tips the scales at a mere 18 grams!
Notes from Dave: This is a world beater ESC. Now we can run high voltages in our smaller models with a small tight ESC from a quality manufacturer. I'm very excited to put one of these in my 5S, 16 ounce Stick 400. Sweet!
Input Voltage: 2-6 Lipo Max Continuous Amperage: 25* BEC Voltage: 5.5v BEC Amperage: 3 Continuous, 8 Surge** Switching Rate 7,000 Hz Resistance 0.0065 Ohms Brake yes, programmable Reversible yes - change any two wires Size .072 x 1.72 x 0.32 in. Weight (w/wires) 0.63 oz. (17.9g) Universal connector
*RC HOBBY APPLICATION RATING: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC's operating temperature.
**Peak indicates amperage sustainable for most servos' current draw transients. Always confirm servo current draw before the first flight of the model.
1/32 aircraft ply large laser horns. Large mounting surfase area on these are idealy suited to models with thick control surfaces like foamies. These horns have holes correct for 1/32 wire used in all the smallest servos such as GWS Pico/Naro, HS-50, PS-20. HE490, HE2003, MX30 and many others. kits. Install horns in a slot in surface, because of the large contact area, they won't wobble like plastic pin type horns do. This results in finer better control and fewer trim changes in flight. 8 horns per package. SKU Number: RRCLH32LG
Easily snaps over simple L bends to retain your push-rod end in servo or control surface horn. For .093 (2.5mm) wire size. .093 (2.5mm) is the diameter of the smooth portions of 4-40 push-rods. SKU Number: DUB885
This material shrinks easily with your covering shrink gun, lighter or other heat source. After shrinking, this higher quality tube stays flexible keeping your strain relief plans intact. Shrinks about 50%. 1/16 and 3/32 sizes are most popular for individual servo and park flier pack wires. 1/8" for strain relief on 2 pole 22 gauge battery pack wire, larger sizes for larger wire. Shown at right is 3/8" for locking together servo connectors you won't be able to easily inspect later. Measurement is inside diameter. Sold in multiples of 2' lengths. SKU Number: WS20B
Y harness. 10 to 12" long. Use to run two servos off one channel output on RX. Hitec/JR/Airtronics Z(new) connector style, 22 gauge heavy duty 60 strand wire, gold connector pins as always. SKU Number: RRCY12HDJR
Our set includes the Crimping Tool, Wire and Pin Kits you need to get started making your own connector ends, Y's and extensions.
Included: 25 Feet Futaba Color Coded Servo Heavy Duty Twisted 22ga Wire 10 each Male End Connectors 10 each Female End Connectors Radcial RC Connector Crimp Tool
Easily snaps over simple L bends to retain your pushrod end in servo or control surface horn. For .072 wire size. .072 is the diameter of the non-treaded portions of 2-56 pre-threaded pushrods.
This material shrinks easily with your covering shrink gun, lighter or other heat source. After shrinking, this higher quality tube stays flexible keeping your strain relief plans intact. Shrinks about 50%. 1/16 and 3/32 sizes are most popular for individual servo and park flier pack wires. 1/8" for strain relief on 2 pole 22 gauge battery pack wire, larger sizes for larger wire. Shown at right is 3/8" for locking together servo connectors you won't be able to easily inspect later. Measurement is inside diameter. Very economical to keep plenty of this material on hand. You'll find many uses, we even use the smallest size for wheel collars on some of our kits! Hint:In a pinch? Short sections of tubing can be opened up 25% to 50% larger with hemostats or fine needle nose pliers. Sold in multiples of 3' lengths.
3-pole male pigtail JST Micro White connector. Used by battery on Plantraco RX, servos for Wes Technic, JST GWS RX's and is the same connector used on Spektrum/JR satellite remote RX extensions. Comes with 26 gauge wire. White in color.
LOOKING FOR A DEAL? All Futaba, JR-Hitec, Airtronics(old) connectors, male, female and two & three wire battery male single end leads/pigtails are quantity of 5 for $8, regularly $2 each. If you need 4 or more leads, get your discount by entering the quantity of "5-pk" deals you want because your getting 5 connectors for the price of 4 at $8.00.
How it works: SwitchGlo Pro simply plugs into a receiver channel, then to your glow plug. You assign a transmitter toggle switch to this SwitchGlo channel, and toggle your glow on and off, at startup or in-flight.
You can program mix SwitchGlo just as you can program mix any servo on your craft, allowing you to utilize your glow in ways you never thought possible! Low Throttle glow activation is achieved by programming your TX to activate the SwitchGlo channel at any throttle position you desire. You can further enhance your Low Throttle mix by assigning a toggle switch to activate the mix, thereby forever preventing "Hot Starts"
Know when you glow! - SwitchGlo will beep the entire time your glow plug is glowing, providing invaluable reassurance you never thought you needed! SwitchGlo helps you diagnose starting problems; a single beep from SwitchGlo signals the glow/ground loop is open, most often indicating your glow plug is spent. This feature greatly reducing your troubleshooting efforts!
Technology: SwitchGlo Pro is an intelligent and highly efficient on-board glow driver. Its state-of-the-art voltage adaptive algorithm optimizes the power transferred from your battery pack to your glow plug providing the ideal glow. Outfitted with low power components, switched-mode voltage regulation and adjustable firmware, SwitchGlo is not your conventional on-board glow system.
Other on-board glow systems use linear regulators that waste power (up to 3 times as much) and operate at dangerously high temperatures. These linear glow drivers also suffer from low glow at lower pack voltages, while SwitchGlo gives a strong and consistent glow from 4V - 9V. Combining the benefits of switch-mode voltage regulation and the smallest footprints on the market, SwitchGlo Pro is the most advanced way to glow! SwitchGlo Pro draws an insignificant 0.4mAh per 1 second of glow time and will not noticeably drain your receiver battery. Total onboard weight is only 25 grams including the pig tail.
Easy to cut gator off and solder on any plug connector you like, see options in drop down menu. Check out "Glow & Fuel Power Everthing" sub category "Glow Plug Fittings" for varieties. At your Add any of them to your basket and include a note with order that you'd like it added to your SwitchGlo Pro along with wire length you'd like. We'll do the soldering no charge!
Specifications:
Dimensions: 1.587" x .720" x .590"
Receiver cable: 8"
Glow Plug Pigtail: 8"
Weight: 28 grams with pigtail
Input Voltage: 4V - 9V input
Output Power: 4.8W
Power Consumption:
0.44mah per second of glow time
2.2mah per 5 seconds glow (average start)
4.4mah per 10 second glow (auto shut-off)
33mah to start craft for a typical 15 flights per charge
Over 2300 average glows on a 5200mah battery (assumes no other battery draw)
And you thought the story about aliens at Wright Patt was just a conspiracy theory? At long last, a durable light weight quad copter airframe kit. This kit makes use of basic 10mm square carbon, fiberglass or aluminum tubes. All of our 10mm boom based Slow Stick hopups such as servo mounts, battery tray's, gear mounts and etc.... are compatible with our Quad Coper Designers Kit.
By making use of different motor systems and different boom lengths, you can make a quad of any size you like up to 1 meter (39") frame OD. Our motor mounts are light enough for small outrunners and strong enough for even 28mm size outrunners. You can use this kit as the basis for your special project. Want to carry your GoPro camera to get that special shot? Want to build a Quad FPV? Want to deliver a can of soda, or perhaps a bowling ball? The basis for all those fun projects is here.
The center platform is 5" in diameter. Each motor mount surface is 1 5/8" (41.27mm) square and on the same plane as the center component platform. All required parts are included to attach the battery pack mount on top or bottom of platform. Mounts for auxilliary booms are provided if for example you wish to mount a tail fin or place a gimbled camera on a boom between the motor booms. Wire for landing gear is provided. The gear is mounted on the motor mounts. A bending plan is provided. The kit may be configured for flying in either On-Axis (Cruciform or +) or Off Axis (Racecar or X) configuration.
What you get: All parts for center platform including main boom and auxillary boom mounts, 4 motor mounts, battery straps, fasteners/stand offs, wire and bending plan for landing gear.
What you need to add: 2 each 10mm square booms (GWS Slow Stick Booms and woodie arms listed in this category), 4 motors, 4 speed controls, stabilizer board of some sort, battery to match (usually 3S 2100 or so) and receiver.
Deans 3-Pin Male/Female, one set. Use for Servo, battery or charger connection. Deans connectors are bulletproof. All Deans connectors come bare with heat shrink.
Put wires colors where you want, the standard if you want to conform is polarity pin (the offset pin) is signal, center is red (+) and the other outside pin is black (-). We sell and use only Genuine W.S. Deans Plugs.
PowerBox Systems Charging Lead Deans type, silicone wire 1.5mm, 40cm Long. Also includes the connectors made by the American Deans company. We use only original Deans plugs and sockets for these connectors. Features: Heavy-duty insulation of soldered joints Excellent long-term functional properties Soldered joints immune from oxidation Vibration protection Kink protection Resistant to chemical influences Temperature-resistant from -30°C to +90ºC
The PowerBox PIK range of connectors exploits modern Hot-Melt technology to combine proven connector systems used in modelling applications.
All the joints in our cables are soldered on our premises, and subsequently checked by a second staff member for correct polarity and quality of workmanship. The connector is then placed in a specially made injection-moulding tool, in which it is encapsulated with a special plastic at a temperature of 220ºC and a pressure of 10 bar.
This process permanently seals the soldered joints as well as acting as a strain relief. Neither mechanical stress nor environmental influences - such as damp or heat - can have any adverse effect on this connection. The plastic we use is resistant to vibration, oxidation, acids, alkalis and fuels, and is temperature-resistant from -30ºC to +90ºC.
The cables we supply include types with different conductor cross-sections, adapters, charge leads and three-core servo leads. Cables with a cross-sectional area of up to 1.0mm have PVC insulation, while the 1.5mm and 2.5 mm types feature silicone insulation.
We are anxious to protect you, our customers, from plagiarists, and for this reason we have registered the design and other quality characteristics of these products in the Design Register of the Deutsches Patent- und Markenamt (German Patent and Brand Office).
(Reference No. DE 40 2010 000 949.5, Rights Holder: PowerBox-Systems GmbH)
We can hand make pigtails to almost any specification. A "Pigtial" has a connector on only one end. Silicone 20 gauge are as heavy as you can get and have the added bonus of being very flexible and heat resistant. Use to repair servos, switch harnesses or perhaps add to existing servos for that "Extension Free" custom instalation. Choose from drop down menus your preferences. Generally we size these by measuring from the back of each connector. So the overall length will be greater by connector shell length. Twisted wire can be adjusted slightly in length by changing the number of twists. We try to get within about 1/2" of your spec. Please order long enough to compensate for minor variance.
10" machine made Silicone pigtails are available in our connector section at lower cost if they can meet your needs.
Note, for a happy life, get your sex right. Servo and battery ends are "MALE", RX's and Y harness receptacles are "FEMALE". When the pins are hidden, connectors are gendered by the shell. Just remember as an assembly, a servo plug fits inside an RX or Extension therefore it's male.
The PERS is a very tiny receiver-actuated on/off switch. It plugs into one of your receiver channels and lets you turn a device on/off using a stick, switch, or knob on your transmitter. The PERS performs the operation equivalent to a servo moving a mechanical switch back and forth, but in a much smaller package, and with no moving parts! The PERS will operate with any receiver running on 2-6V and can switch on/off pretty much any device up to 3A of current. The PERS is perfect for lights, glow plug drivers, motors, smoke pumps, rocket igniters, solenoids, relays, and whatever else you can think up. Wired correctly, it could be used to trigger cameras or other electronic devices. The PERS weighs just 0.3g, not including the 6" output wires (if left full-length these wires weigh another 0.3g).
If you don't mind doing a bit of soldering, the PERS can be easily reversed and assigned a fail-safe setting. The PERS was designed to use the power from your receiver battery, but it can also be configured to use a separate battery, up to 20V. Take a look at the PERS instructions (link below) for reverse/fail-safe settings and wiring diagrams.
The PERS is available with 4 different types of servo connectors to accommodate the various micro receivers available today. Scroll down to view the different options and cart buttons. Packing Note: PERS's ordered in 1pc quantities will come in individual packages. 3 and 10pcs quantities may be supplied in one package with one set of instructions.
Choose your connector option:
PERS with standard Universal/JR servo connector
This model comes with a standard universal/JR servo lead which will plug into any brand receiver which uses standard servo connectors. The servo lead is 3" of 28AWG wire in Futaba colors, but with a universal connector.
PERS with 1.00mm servo connector for Spektrum AR6400 receivers
This model comes with a 1.00mm servo lead that will plug into the Spektrum AR6400 and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in JR colors. The PERS is ten times lighter than the AR6400 receiver so it won't noticably affect the weight of your model. In one of the images below you can see the PERS plugged into an AR6400 receiver controlling a high-brightness LED.
PERS with 1.25mm servo connector for Futaba R616FFM micro receivers
This model comes with a 1.25mm servo lead that will plug into the Futaba R616FFM receiver and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in Futaba colors. The PERS is 20 times lighter than the R616FFM receiver so it won't noticably affect the weight of your model.
PERS with 1.50mm servo connector for Spektrum AR6300 receivers
This model comes with a 1.50mm servo lead that will plug into the Spektrum AR6300 and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in JR colors. The PERS is six times lighter than the AR6300 receiver so it won't noticeably affect the weight of your model.
Specs:
Receiver Power: 2.0-6.0V
Receiver Current Draw: <1mA (LED off), 5mA (LED on)
Maximum Continous Switch Current: 3.0 amps
Maximum Momentary (<2s) Switch Current: 4.0 amps
Maximum Switch Voltage: 20.0V (see instructions for using a separate battery)
Circuit size not including wires: 7.7 x 6.2 x 3.4mm (0.30 x 0.24 x 0.13in)
Specs - Universal Connector
Weight without output wires: 0.85g (0.030oz)
Weight with 6" output wires: 1.14g (0.040oz)
Overall length with 6" output wires: 23.7cm (9.25in)
Receiver connection: Universal/JR 0.1" connector, 3" 28AWG Futaba color wire
Specs - All Other Connectors
Weight without output wires: 0.30g (0.011oz)
Weight with 6" output wires: 0.59g (0.021oz)
Overall length with 6" output wires: 18.0cm (7.0in)
The DU-BRO Micro Push Rod System is a lightweight and easy-to-install control linkage designed for small to medium electric RC airplanes. It gives you smooth, accurate control while keeping the weight of your model as low as possible. This makes it perfect for foamies, indoor planes, park flyers, and small electric aerobatic models.
Each package includes two complete push rod systems, so you can set up two control surfaces--such as the elevator and rudder. Everything you need is included, and the parts are designed to work together for simple, clean installation.
Each set contains:
2 pushrods with a pre-bent 90? end, ready to use
2 pushrod housings that guide the rods and stop them from bending
2 Micro E/Z Links for attaching to your control horn
2 Mini E/Z Connectors for attaching to your servo arm and making easy adjustments
These components allow for smooth movement with very little friction. They also make it easy to fine-tune your control surfaces so your airplane responds the way you want it to.
The Micro Push Rod System is available in four different weights to fit a wide range of aircraft sizes:
#847 - 3.2 grams per set
#852 - 4.6 grams per set
#922 - 5.7 grams per set
#941 - 18 grams per set (for slightly larger electric planes)
This system works great on:
Indoor flyers
Small park flyers
Slow flyers
Foamies and EPP aircraft
Lightweight scratch-built planes
Installation is quick and beginner-friendly. The housings glue easily to your model, and the connectors make attaching and adjusting your pushrods simple.
Proudly Made in the USA, the DU-BRO Micro Push Rod System provides a dependable and lightweight way to get precise control from your electric RC aircraft.
This item qualifies as a Rod Stock Item, read below:
Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. Weight is in grams per meter, as per the manufacturer documentation, no guarantees on weight. Find other qualifying items to mix and match to meet the 6PC Minimum Purchase Requirement:
 "Old School Model Works Comet Kit")
 "Wright Stick Conversion Kit")
 "DYS Servo 3.7g (GS-3707)")
 "F3P Biased Servo Horn #1 Fiberglass")
 "Sig Somethin' Extra Kit")
 "1/8\"/3.2mm Flexible Shrink Tubing for Wires, 3-Foot Pc BLACK")
 "JR 22ga Heavy Duty Extension Harness 18\", 24\", 30\", 36\" or 40\"")
 "Castle Creations Talon 25")
 "Large Laser Control Horns 1/32 wire")
 "E/Z Link L Bend Keeper .093")
 "25/32\"/20mm Flexible Shrink Tubing for Wires, 1-Foot Pc Black")
 "Servo Y Harness JR/Hitec/Airtronics Z (new)")
 "Radical RC Wire-Crimper-Connector Set Futaba Type")
 "Du-Bro E/Z Link L Bend Keeper .072")
 "5/64\"/2.0mm Flexible Shrink Tubing for Wires, 3-Foot Pc")
 "RRC Extension Harness 78\" (200cm) Buffered/Filtered JR")
 "3-Pole FJ Wire Pigtail w/Male JST Micro White")
 "SwitchGlo Pro")
 "Radical RC Quad Copter Designers Kit")
 "DEANS 3-Pin Connector One Pair")
 "PowerBox Systems Charging Lead Deans, silicone wire 1.5mm, 40cm Long")
 "Hansen Hobbies PERS V2- Pico Electronic Receiver & Accessory Switch")
 "Du-Bro 30\" Micro2 Pushrod System #922 (30\" x .047\") 2-Pack")
