Spektrum, JR, Hitec and modern Aitronics all use the same connector. Sometimes called a "Z" plug. Airtronics are often blue but are the same connector. The Male version of this plug is universal as it fits Futaba harnesses and receivers. If your flying something modern that's antother brand, nearly every one of these radios will use this plug. Exceptions are micro gear with white plugs. IMPORTANT NOTE: Assembled connectors with enclosed pins are gendered by the shell. A servo or battery end fits inside the RX (or mating plug) and is therefor Male.
Micro Lite 3-Pole/Wire Extension harness. 6" long. Very light weight for use on foamies and park flyers! 30 gauge fine, lightweight wire. Universal connectors.
Pack of JR compatible pins and shells. This kit contains enough parts to build 10 male battery or servo ends (fewer parts show in photo). All Pins Gold Plated. Available in multiples of 10 below.
Use these Female pin kits with our special Hobby Pin Crimp Tool to make your own custom extensions, Y's etc. Build custom extensions to fit your setup exactly. The two arms of Y harnesses and RX's are Female. Wire/connector that you plug a battery connector into is female. Since the connector pins are covered by the connector jacket the unit is gendered as female. This kit contains enough parts to build 10 Female (fewer parts show in photo). All Pins are Gold Plated. Available in multiples of 10 below.
Bulk pack of JR compatible pins and shells. This kit contains enough parts to build 50 male battery or servo ends. All pins are gold plated. Photo is sample for identification of parts only and not representative of quantity.
Bulk pack of JR compatible pins and shells. This kit contains enough parts to build 50 female ends. All pins are gold plated. Photo is sample for identification of parts only and not representative of quantity.
Universal Y w/ Digital reverser (fits Futaba/Hitec/JR/Airt. Z) for 4.8v - 6.0v applications.
This Reversing Y-Adapter is designed for giant scale, glider, pattern, or sport planes with split-elevators, split-flaps, or twin-engines. This Y-Adapter will reverse one servo and keep the other servo straight.
2 Wire battery female as found on the battery input lead of a switch harness or the end of a charge cord. This plug will accept the male connector on a stock RX battery pack. This item is a 26 gauge which is similar to what you find on many factory stock switch harnesses. I consider it light duty, use on charge cords or in smaller low servo count models. Twisted Wire.
Y harness. 24" long. Use to run two servos off one channel output on RX. Hitec/JR/Airtronics Z(new) connector style, Hitec Heavy Duty Wire.
SKU Number: HRC54702S
JR, Hitec, and Airtronics Servo Connectors
Servo and receiver connections in the JR, Hitec, and Airtronics Z (new) style share a common plug pattern, and this category collects the connectors, pins, and housings needed to make or repair those leads. Building your own leads lets you set exact lengths and replace a damaged plug without cutting into good wiring.
Pigtails and Assembled Leads
The two-pole battery pigtails come in male and female single-end versions in the Z (new) style, giving a pre-wired starting point for an extension or battery lead.
Pins and Housings
For scratch-building a connector, male and female radio connector pins are sold in 10-packs of 30 pins, and matching male and female housing shells are offered separately without pins. Combining the shell and pins lets you assemble a connector to the length and gender your setup requires.
Find the connector, pins, or housing that fit your radio gear in the listings below.