GWS's new brushless control is programmable. Out of the package they are set to auto detect Lithium cell count and with brake feature on. With the addition of the inexpensive GWPGM001 programmer, you can set NiCad/NiMH/Lipo detection modes, no brake-light brake-medium brake-strong brake, Throttle delay, switching frequency and level of timing advance (Auto/5/12/18/25 degrees). A lot of nice features for a low cost control.
GWESC45A Performance Data: Max Amps:45A Weight: 32 grams Internal Resistance: 2.33mOhms BEC:4A/5.0V Ni-Cd or NiMh Battery: 6-12cells Lipo Battery: 2-4 cells or 2-4 A123 Lithium Iron cells Size: 75x30x9mm (2.95x1.18x0.35")
Weight:25g (0.89oz) 63mmx38.1mmx12mm Flyers can carry this small & compact programming board to the flying fields and change the setting on the GWS Brushless Speed Controllers without a PC. The functions flyers can change are as below: 1. Battery Cutoff Voltage: Ni-MH 6~16 Cells/Li-PO 2~4 Cells. 2. Brake Setting: No Brake/Soft Brake/Moderate Brake/Hard Brake. 3. Responding Delay Time to Throttle: 0.15/0.3/0.7/1.0 Sec. 4. Switching Frequency: 8 KHz/16 KHz/32 KHz/none. 5. Timing Advance: auto/5 degree/12 degree/18 degree/25 degree.
 "GWS BRUSHLESS ESC 45A - Lipo/A123")
