The Wonder is best described as a very fast, go-where-you-point-it, turn-it-quick-or-it'll-be-gone kind of plane designed for hot-thumbed R/C pilots. With an .09 or a .10 size engine, the Wonder is actually a very nimble, aerobatic, smooth flying sport plane, but with a snarling .15 or .19 up front it's a hand- launched hot rod! Landings are no sweat thanks to the thick symmetrical airfoil and the light wing loading.
Specifications: Wingspan 37 1/2 sq.in. (952 mm) Wing Area 338 sq.in. (25 sq dm) Weight: 26 - 38 oz 737 - (1077 g) Wing Loading: 11.1 - 16.2 oz/sq ft (423 - 4943 g/sq m) Radio Required: 2-Channel (ail, ele) or 3-Channel (ail, ele, thr) Recommended Glow Engines .09 - .19 cubic inch (.58 - 1.23 cc) 2-Stroke
Special notes about electric from Dave: This model makes an excellent electric "muscle" model. Often overlooked since SIG does not offer an e-version or any electric power system setup info. It's easily adapted. Below are my suggestions for a range of practical to extreeme power systems.
Setup and Performance Chart
Motor
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM
Est. Top Speed
Himax 2816-1220
3
8x6
19.1
215
11,500
29
65
1602
60
Himax 3510-1540
3
8x6
34.1
384
13830
42
79
2856
72
Himax 3516-1130
4
9x7
42.9
644
13,310
64
88
4670
86
Himax 2825-2300
3
7x6
38.5
433
15,650
38
86
2538
71
Himax 3514-2900
3
7x6
64.9
724
16,520
44
94
3241
73
Himax 3514-2900
5
7x4
84.5
835
23.310
76
88
5565
87
Estimates based on manufacturers provided constants using E-Calc. High Quality 2100mah used as trial cell in calculations. Presumed model weight of 26oz. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of battery, ESC, and many other factors.
Sodium-ion batteries are highly safe, have no risk of explosion and fire, and are environmentally friendly, non-toxic and non-polluting. No memory effect - the battery can be charged in any state of discharge, giving you peace of mind. The working principle of sodium ion batteries is similar to that of lithium-ion batteries, which utilize the insertion and removal process of sodium ions between the positive and negative electrodes to achieve charging and discharging.
Specifications:
Nominal Voltage: 3.1V
Work Voltage Range:1.5V-4.1V
Continuous charge /Discharge current:10C
Operating Temperature:-30°-60°
Cycle Life:More than 4000 times (0.5C/0.5C @80% SOH)
Nominal capacity: 1500mAh
Dimension: 18mm(D)65mm Approx.
Weight: 38+- 10 g
Advantage of Sodium ion Battery
1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.
2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.
3. High Power: The cells have continuous discharge current 10C Peak discharge current.
4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.
5. Wild Voltage range: The working voltage range is 1.5V-4.1V.
6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.
7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.
8. Charge on Li-Ion mode set voltage to maximum 3.9-4.1V
This listing is for 1 (one, single cell), multiple cells shown for example only.
Sanyo N-700 AAC Direct fit replacement for most Transmitters requiring square packs.
Weight 180g/6.37oz.
Adaptable to replace clip packs from early JR and Futaba TX's.
Maintenance charge and maximum form charge rate for this pack is not to exceed 70mAh. See chart at top of category page for charging recommendations.
Form charge on factory wall charger only, not to exceed 70mAh. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.
Planetary ball bearing gearbox for S-500 thru S-600 motors. Comes with pinion for your motor with 3.2mm shaft. Output shaft diameter is 4mm. These gearbox's are very very smooth and quiet unlike other very similar looking units.
Size:
OD of mounting flange: 1.08" (27.5mm) OD of main gearbox body 1.165" (29.6mm) OD of motor mounting surface 1.38" (35mm) Motor Mount Holes: 2 each - 3.3mm (.130"), 25mm on center Length of gearbox housing 1.44" (36.6mm) Overall Length W/Shaft 2.050" (52.2mm)
The metal D-645MW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec's industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
Features
Programmable PWM Digital Amplifier 32-Bit MCU with 12-Bit ADC Circuitry 4096 Resolution 1M Cycle Long Life Potentiometer Wide Operating Voltage (4.8 ~ 8.4 Volts DC) Dual Ball Bearing Supported Output Shaft 25-Tooth Output Spline
Programmable Functions
End Point Adjustments Direction Fail Safe Dead Band Speed (Slower) Soft Start Rate Overload Protection Data Save / Load Program Reset
Accessories
Metal Gears Set | Link | Metal / Plastic 1st Gear Set | Link | Plastic Case Set | Link | Applicable Horns | Link 1 o 2 o 3 | D645MW Servo Specifications Performance Specifications
Operating Voltage Range (Volts DC) 4.8V ~ 6.0V ~ 7.4V Speed (Second @ 60?) 0.28 ~ 0.20 ~ 0.17 Maximum Torque Range oz. / in. 115 ~ 158 ~ 180 Maximum Torque Range kg. / cm. 8.3 ~ 11.3 ~ 12.9 Current Draw at Idle 30 mA No Load Operating Current Draw 500 mA Stall Current Draw 2,650 mA Dead Band Width 2 us
Physical Specifications
Dimensions (Inches) 1.59 x 0.77 x 1.48 Dimensions (Metric) 40.6 x 19.8 x 37.8 Weight (Ounces) 2.11 Weight (Gram) 57.0 Circuit Type 32bit Programable Digital Motor Type 3 Pole Metal Brush Ferrite Gear Material Metal Bearing Type Dual Ball Bearing Output Shaft (type / ?mm) H25T Case Material Plastic Dust / Water Resistance N / A Connector Gauge (AWG) / Strand Count 22 / 60
Radio Control Applications
Parkflyer N / A Sport Plane 12 - 15 lbs. Sailplane 2 meters and up 3D Performance 12 - 15 lbs. Scale 12 - 15 lbs. Electric Helicopter 600mm Gas Helicopter 50 - 59 Class On Road 1/10th Monster Truck 1/10th Buggies 1/10th Truggies 1/10th Short Course / Truck 1/10th Crawlers N / A Sail Boat = >1M & Scale Power Boat 1/10th
A123/LithiumWerks' High Performance Nanophospate lithium iron phosphate (LiFePO4) battery technology delivers high power and energy density combined with excellent performance and extensive life cycling in a lighter weight, more compact package. A123LithiumWerks' cells have a low capacity loss and impedance growth over time as well as high usable energy over a wide state of charge (SOC) range, allowing out them to meet requirements of many applications.
These batteries are capable of 50 amp constant discharge, with a 10 second pulse rating of 120 amps. Cycle up to 1000 times before significant capacity loss occurs. The rugged assembly of the products will ensure that your pack will last for years, not months. Can be repeatably charged to 100% in 15 minutes. Charge only with Lithium chargers with an A123 (LIFE) mode limiting charge voltage to 3.6V per cell. An Astro Blinky for A123/LithiumWerks is highly recommended as a balancing aid for these cells.
LithiumWerks ANR26650M1B Specifications:
Manufacturer: LithiumWerks
Mfg PN: 300832
Chemistry: Lithium Iron Phosphate (LiFePO4)
Voltage: 3.3 Volts
Capacity @ 25°C: 2.6 Ah
Energy @ 25°C: 8.25 Wh
Specific Power: > 4000 W/kg (@ 25°C, 2sec pulse)
Impedance: > 6 mΩ (1kHz AC) Typical)
Cycle Life: > 4000 Cycles (@ 1C/1C, 100% DOD)
Dimensions Height (max): 65.15 (+/- 0.5 mm)
Diameter (max): 25.96 (+/- 0.5mm)
Product Weight: 76.0 (+/- 1.0 g)
Discharging
Max Continuous Discharge Current 50 A (20C rate) Max Pulse Discharge Current (10s) 120 A (48C rate) Minimum Voltage / HPPC Pulse 2 V / 1.6 V Temperature -30 °C to 60 °C
Charging
Cell charging parameters: CC-CV (constant current - constant voltage) Recommended Charge Current 3 A (1.2C rate) Max Continuous Charge Current 10 A (4C rate) Max Pulse Charge Current (10s) 20 A (8C rate) Float Voltage 3.45 V Recommended charge V & Cut-off Current 3.6 V, taper to 125mA
Temperature Range (reduce charging current to 250mA when under 0 °C) -20 °C to 60 °C
Storage Storage Temperature -40 °C to 70 °C
Mechanical Diameter Ø25.96 +/- 0.5 mm Length 65.15 +/- 0.5 mm Mass 76 g +/- 1.0 g
Tech Notes:
10A Recommended float charge and storage voltage: 3.8V Recommended cut-off current for CV hold: 0.05A Maximum continuous charge current: 10A Maximum allowable charge voltage: 4.2V MAX Fast charge time: 15 minutes Cell discharging parameters: Recommended discharge cut-off voltage: 2.0V Maximum continuous discharge current: 50A Cell temperature parameters (skin temperature) Maximum recommended cell temperature: (158F) Maximum allowable cell temperature: (185F)
Celebrating Sig's Golden Anniversary, they are ecstatic to introduce the latest addition to their line of high quality Build It Yourself airplane kits: the 1/5 Scale J-3 Piper Cub..
They've put everything they've learned about model airplanes into this special kit: scale details, Sig laser cut parts, full size plans, a comprehensive instruction booklet. All the features you've come to expect from Sig. Then they added a little something special. The new 1/5 Scale J-3 Piper Cub is so real, you may have a hard time separating it from the 1930's full size airplane. All of the details are included - a working side door and window, dummy engine cowls with "eyebrows", scale-like wire landing gear, a fully detailed instrument panel... even the realistic "bird's eye-view" window on top of the cabin. Add in a full decal sheet including Cub lightning bolts and you have a Cub standing far above the rest.
Specifications: Wingspan 84.5 in 2146 mm Wing Area 947 sq in 61.1 sq dm Weight 7 lb 3175 g Length 55.25 in 1403 mm Radio Required 4-Channel, 5 Servos
Recommended Engines .40 - .46 cu in (6.5 - 7.5 cu cm) 2-Stroke .45 - .65 cu in (7.5 - 10.7 cu cm) 4-stroke
Kit Features 90% laser cut parts for accuracy and ease of assembly Windshield and engine cylinders Quality SIG AAA balsa and plywood A super tough scale-like tail wheel assembly Full size plans Molded plastic parts for windows Fiberglass cowling A full compliment of quality SIG hardware Fully illustrated manual to guide you from box to completion
Additional items required: 4 channel radio system with 5 standard servos .40-.46 2 stroke or .45-.65 4 stroke glow engine Propeller to fit engine 1 piece fuel tubing - SIGSH286 1 piece 12 ounce fuel tank - SUL429 2 pieces 3-3/8 inch main wheels - DUB338TC 1 piece 1 inch tail wheel - DUB100TW 4 rolls covering material Optional DuBro Fuel Valve - DUB334
Tools Required: Thin CA Adhesive Medium CA Adhesive Modeling knife with #11 blades Drill with bits Dremel Moto Tool with bits Sanding Block Sandpaper - Assorted Grits T Pins
Temporarily out of stock, pending manufacturer production
4x4 Square 9.6V FDK (formerly Sanyo) 8-AA 2500 NIMH cells. "Twicell" (formerly Eneloop) low self discharge type which comes partially charged and is the same product as prior Twicell (Eneloop) cells. Same size as 700 and 1100 NiCad pack above. Less weight than 1400 NiCads above. Good cell where fast charging is not a needed but extra capacity is desirable. High capacity TX Battery, if you are sick of your TX running down. Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have included!
9.6V Weight 312g / 11 oz.
Individual Cell Internal Impedance 20.0mΩ
All AA size cells over 1700mAh should not be fast charged ever! If you repeat this experiment, your on your own. I recommend only factory wall wart charging with units rated of 70mAh or less for these type cells.
Break in (first forming charge) on 50mAh factory wall charger 700mAh-19.6 hours,1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mAh wall charger deduct 28% of time, for 100mAh wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty.
Any peak or fast charger use on this pack voids warranty. Don't bother calling trying to get a warranty for failing to follow instructions. I've heard all the stories. They all end like this, "My battery does not cycle well now." and "It worked ok for a while but now it runs down fast shortly after charging". If you put any AA cell over 1700mAh capacity on your peak charger, it's bad. I've already made theses tests for you so you could avoid the pain. If you ruin one of these mega capacity TX packs, just order a new one and do better the second time.
Himax Brushless motors are manufactured to high standards for the discerning modeler. Designed for light-weight, high efficiency, high torque and durability Himax Outrunner motors are sure to make today's radio controlled models perform. The HC2808 series motor is made for small to medium size models weighing 9 to 20 ounces. Replacement for 370-400 motors. Package includes collet type bolt on prop adapter, prop saver, bullet females for your ESC and fasteners.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
47g/1.66oz.
27.8mm (1.09") x 24.7mm (.97")
5-11, 15 15s
4.0mm (1.574")
20k
1160
.150Rm
.6A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
2
9x5
8.9
67
6,840
14
31
2
9x7
11
83
6,040
15
41
2
10x8
14.6
110
5,650
18
42
3
8x4
10.7
120
10,720
21
39
3
8x6
14
158
10,010
24
55
3
9x5
16.5
186
9,460
28
53
3
9x3.8
14
158
10,010
25
34
4
7x4
11.8
177
14,730
27
53
4
7x6
15.7
236
13,850
29
76
Estimates based on manufacturers provided constants using E-Calc. High Quality 1200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
Micro horn sets. Extra long length for big throws on 3D ships. Can be trimmed to shorter lengths easily. 4 long single horns, 2 long double horns. Maximum control radius about .950" (24mm). Single arms are 1.1" (28.9mm) over all length. Double arms are 2" (51mm) over all length. Photo is manufacturers sample. Actual color red.
Known compatibility: Hitec HS-56BH, HS-65HB and HS-65MG
Glue on to 2.5mm carbon or solder onto 2.5mm metal rod. Actual ID 2.65mm (.103"). Could also be soldered on to non-threaded end of roll-threaded 4-40 pushrod material or 3/32 music wire. Overall Length 33mm, threaded portion 16mm. 2 per package.
This is a 'TIL IT'S GONE Special. Was $149.00, Now $89. Note, new in package merchandise, we no longer do business with Model Motors in the CZ Republic. Any warranty issue (I'm not expecting any) must be handled through them, no returns directly to Radical RC on this product for any reason.
Brushless motor, 20mm size with added diameter from cooling fins, uses neodymium magnets, carbon case and unique solder posts are manufactured using advanced technologies from finest materials - our standard. Twin ballraced hardened steel shaft and overall robust but very lightweight construction ensure very long lifetime. This small beauties are suitable for use with gearbox or in ducted fans. Tapped hols in front of case match S-400/480 motors making it compatible with many S-400/480 type gearbox's.
I use one of these on a delta and it's sick fast. Enjoy!
Specifications: Voltage range 6-8 cells RPM per Volt 6,370 RPM/V Max. Efficiency with ESC 77% Max. Efficiency Current 14-22 A (>70%) Max. loading 28 A / 30 s No load Current / 8V w gear 3,9 A Internal resistance 49 mohm Dimensions with gearbox 24,8x65 mm Shaft Diameter Gearbox 4 mm Weight with gearbox 77 g Recomended model weight 600 - 1200 g Propeller range VMGM 6,00:1 6 cells prop 12"x8" VMGM 6,00:1 7 cells prop 11"x7" VMGM 6,00:1 8 cells prop 10"x6"
I love this motor in the .40 to .60 class models and glow conversions. Generally ships weighing 4.5 to 8 pounds, floaty models could be even larger.
HC42 Outrunners generally used from 500-1000 Watts. High torque to turn large props direct drive. Replaces .40-.60 size engines. Mounting hardware and connectors included. Himax Brushless motors are manufactured to high standards for the discerning modeler. Designed for light-weight, high efficiency, high torque and durability Himax Outrunner motors are sure to make today's radio controlled models perform.
Recent report from a .40 size pattern Kyosho Sensation. Pilot reports better than any fuel plane in ever flown in this class. Setup is 5S Kypom 4200, 11x7 APC-E, Castle Edge Edge 75.
Motor includes: Prop adapter, female wire connectors, motor mounting flange.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
200g/7.0oz.
42(1.7") x 50.0mm(1.9")
30-42, 60 15s
5.0mm (.2")
12k
770
.02Rm
2.4A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
3
12x10
39
439
6,490
60
64
3
13x8
41.37
465
6,380
69
50
3
13x10
47.5
534
6,560
72
61
3
14x7
45.6
513
6,640
74
43
3
14x10
56.2
632
6,170
82
57
4
11x10
47.6
714
9,070
78
85
4
12x6
42.4
636
9,430
85
52
4
12x8
51.3
770
8,980
94
66
4
13x6.5
54.7
821
8,810
102
53
5
10x8
44.4
829
11,970
89
88
5
11x5.5
44.1
827
11,980
99
60
5
11x7
52.0
975
11,530
109
74
6
9x7
39.5
889
14,890
90
95
6
10x6
47.4
1067
14,410
113
79
6
10x8
57.8
1301
13760
119
102
6
11.5.5
57.6
1296
13780
133
72
Estimates based on manufacturers provided constants using E-Calc. High Quality 3200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. SKU Number: MPIHC42200770
Replace a lost, damaged or rotted fuel tank stopper. For glow fuel only. For all Du-Bro tanks, likely compatible with others. Size: OD Neck .650 (16.51mm), OD Top .750" (19mm), Height .410" (10.4mm)
Sodium-ion batteries are highly safe, have no risk of explosion and fire, and are environmentally friendly, non-toxic and non-polluting. No memory effect - the battery can be charged in any state of discharge, giving you peace of mind. The working principle of sodium ion batteries is similar to that of lithium-ion batteries, which utilize the insertion and removal process of sodium ions between the positive and negative electrodes to achieve charging and discharging. Example photos show 2-Cell Flat Packs, single cells and wire configuration options.
Single Cell Specifications:
Nominal Voltage: 3.1V
Work Voltage Range:1.5V-4.1V
Continuous charge /Discharge current:10C
Operating Temperature:-30°-60°
Cycle Life:More than 4000 times (0.5C/0.5C @80% SOH)
Nominal capacity: 1300mAh
Dimension: 18.3mm(D)65.3mm Approx.
Weight: 38+- 10 g
Advantage of Sodium ion Battery
1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.
2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.
3. High Power: The cells have continuous discharge current 10C Peak discharge current.
4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.
5. Wild Voltage range: The working voltage range is 1.5V-4.1V.
6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.
7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.
8. Charge on Li-Ion mode set voltage to maximum 3.9-4.1V
This listing is for one 2-Cell battery pack, single cells shown for example only.
SELECT YOUR OPTIONS BELOW TO CUSTOMIZE YOUR BATTERY PACK
Furukawa (formerly Panasonic) N-700 AACL Typical AA Size, Diameter .56"/14.3mm x 1.93"/48.9mm High, .81 oz/23g. Low Button type AA, Use to build special packs or convert your dry T/RX to NiCad. Manufacturers listed internal resistance is 16Ω.
Fururkawa N-700AACL Battery - 1.2 Volt 700mAh AA Ni-Cd ( NUN-1100AF, IT-900AA, IT-700AA ) CELLS ARE COMING IN AS GREEN OR YELLOW CASING.
Considered one of the most powerful servos in the micro class, the HS-65 is offered with a choice of "shock resistant" Metal or "zero wear" Karbonite gears. The 65 series features a top-ball bearing for long life and positive centering, 31 ounces/inches of power at 6 volts and is an excellent choice for higher performance micro helicopters, electric park flyers, and 1/18 scale cars. Universal connector.
Torque (4.8/6v)
Weight
Speed (4.8/6v)
Bearings
Size SAE
Size Metric
Type
25/31 oz.in,1.8/2.2 kg.cm
0.44 oz./12.47g.
0.14/0.11s
1BB
0.92" x 0.45" x 0.94"
23.60 x 11.60 x 24.00mm
Analog
Choose Quantity Option below. Want 1, 2, or 3 servos? Select first option, then enter quantity 1, 2, or 3. Want a bulk discount? Select 4-Pack, then enter how many 4-Packs you want.
4S K6 Series 3800. 65C (247 Amps) Constant 130C (494 Amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 426 grams Measures: 140 x 48 x 30mm
The heart of this beautiful airplane is it's superior wing design! The light, strong, built-up balsa structure incorporates built-in wingtip washout for superior stability and control. Even expert pattern fliers are impressed with the Kavalier's smooth, responsive flying ability. Make perfectly coordinated, in-the-groove turns. Fly through any aerobatic maneuver with rock solid precision. Flare out for slow, main gear only landings with no tendency to stall or snap roll. Highly recommended as a student pilot's second model! Balsa fuse, tail and wing with built in washout. Build it bolt on or rubber band mount wing with semi-symmetrical airfoil. Steerable nose gear, pre-bent aluminum landing gear and rugged plastic cowling and canopy included as are glow engine mount, full size plans and photo illustrated instruction book. Specifications:
Wingspan 55 1/2 in 1410 mm Wing Area 575 sq. in. 37.1 sq dm Weight 5 1/2 lb 2495 g Wing Loading 22 oz/sq ft 6713 g/sq m Radio Required 4-Channel Recommended Engines .29 - .40 cu. in. (4.8 - 6.6 ccm) 2-Stroke
Notes from Dave: This is absolutely my favorite glow sport ship of all time. It's a classic kit. There was just nothing more exciting on trainer night than to have a graduated student come up with one of these for his 2nd or 3rd aircraft and ask me to test fly it. I dare say, I'd put a whole tank through the model and say, yes, it's still my all time favorite! The model is very pattern like for it's size, super smooth and yet retains all the personality of weekend sport ship. Friendly yet aerobatic and even aggressive if you set the throws for more spirited performance. They land like a dream, are utterly trustworth in any situation. You'll love it as I do.
Power Packages for setups in performance chart available. Includes Castle ESC, Himax motor and APC or Zoar Prop & Lipo Battery.
Electric Setup and Performance Chart
Power Pack #
Motor
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM
Est. Top Speed
Pack #1
Himax 3528-1000
4
11x7
46.2
687
9,490
72
61
1854
64
Pack #2
Himax 3528-800
5
11x6
37.6
699
10,430
79
57
1971
64
Pack #3
Himax 3528-1000
6
10x6
55.1
1230
13,650
102
75
2836
77
Pack #4
Himax 5018-530
8
11x7
36.7
1092
11,660
113
75
3127
79
Pack #5
Himax 3516-1350
3
10x6
41.2
460
9,550
50
54
1130
55
Estimates based on manufacturers provided constants using E-Calc. High Quality 2200-3300mah used as trial cell in calculations. Presumed model weight of 78oz. @3 cells (added oz for higher cell counts). Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of battery, ESC, and many other factors.
This kit is only shipped by Parcel Post to locations outside of zone 4 from our shop regardless of shipping method choosen.
Temporarily out of stock, pending manufacturer production
 "Sig Wonder")
 "RRC K6 Series 4500 11.1V 3S 65C")
 "Sodium Na-Ion Battery #18650 3.1V 1500mAh Single Cell")
 "Hitec D645MW Digital Sport Servo, 32-Bit, High Torque, Metal Gear Servo")
 "A123/LithiumWerks Life Nano Phosphate 2500mah Single #ANR26650M1B Cell")
 "Sig Anniversary Piper J3 Cub 1/5 Scale Kit")
 "Himax HC2808 Outrunner Motor 1160kv")
 "RRC K6 Series 2200 14.8V 4S 65C")
 "Du-Bro Micro Horn Long Set for Hitec 65HB / 65MG")
 "3mm Threaded Rod End")
 "Model Motors Mini-AC Extreme 1215/9 With Gearbox")
 "Himax HC4220-770 Series Outrunner Motor")
 "RRC K6 Series 3300 11.1V 3S 65C")
 "Du-Bro Replacement Glow Stopper")
 "RRC K6 Series 5100 14.8V 4S 65C")
 "Sodium Na-Ion Battery #18650 7.2V 1300mAh 2-Cell Pack")
 "N-700-AACL 700mAh AA NiCad Single Cell Low Button End")
 "Hitec HS-65MG Mighty Feather Micro Servo Metal Gear")
 "RRC K6 Series 3800 14.8V 4S 65C")
 "Sig Kavalier")
 "RRC K6 Series 5100 18.5V 5S 65C")
