Replacement front prop adapter for 6320 and 6330 series Himax Outrunners. Unit is secured with 2 large set screws and would be useful on any motor with an 12mm shaft. Includes washer and 12mm nut. 1.65" (42mm), base diameter 1.18" (29,88mm), prop shaft length 1.325" (33.65mm), depth of bore for motor shaft .987" (25mm). SKU Number: HC63-7
A123/LithiumWerks Nano phosphate 2S 2500mah Pack 2-#26650 Cells. Finest RX pack technology and cell ever produced. See individual cell listing above for cell specifications.
Standard shape is Flat (side by side) as shown in photo. Stick packs may also be constructed as a "Stick" for narrow use.
There is no optional length for XH balance ends - use XH extension.
Use only Lithium chargers with an A123/LithiumWerks mode limiting charge voltage to 3.6V per cell. An Astro Blinky for A123/LithiumWerks is highly recommended as a balancing aid for these cells.
LithiumWerks ANR26650M1B Specifications
Manufacturer: LithiumWerks
Mfg PN: 300832
Chemistry: Lithium Iron Phosphate (LiFePO4)
Voltage: 3.3 Volts
Capacity @ 25°C: 2.6 Ah
Energy @ 25°C: 8.25 Wh
Specific Power: > 4000 W/kg (@ 25°C, 2sec pulse)
Impedance: > 6 mΩ (1kHz AC) Typical)
Cycle Life: > 4000 Cycles (@ 1C/1C, 100% DOD)
Dimensions Height (max): 65.15 (+/- 0.5 mm) / 2.57 inch
Diameter (max): 25.96 (+/- 0.5mm) / 1.02 inch
Product Weight: 76.0 (+/- 1.0 g) / 2.68 oz
See A123/LithiumWerks 2500 Single Cells Above for all other available data.
Want a custom pack? See our custom pack listings, or email us at Sales@RadicalRC.com, and we can special make any kind of pack you require!
Note: Photo shows sample Rx pack with double lead option.
For checking pack voltage between flights, our best advice currently is: Leave model on after flight, plug loaded volt meter directly into pack balance plug (charge port ok but not preferred) hold load engaged, switch model off. Allow pack to drain into meter for 5 seconds, take your reading. See my blog post Checking A123 RX Packs For Recharge Point for help in this area.
Photo example shows Double (2 each) Output Wire Leads and one Balance Harness installed on the battery pack.
Historically, the full-scale Smith Miniplane is one of the designs that helped start the modern homebuilding era. Originally designed and built in 1957 by Frank Smith of Fullerton, California, the Miniplane was an early example of engineering with the amateur homebuilder and weekend pilot in mind. It could be constructed with tools easily within reach of the average craftsman, and in the air it was stable and easy to fly. The top wing spanned 17 ft., and the empty weight was a mere 600 pounds. Powered by a 100hp Lycoming, the tiny Miniplane cruised at 120 mph, climbed at a fantastic 2,500 ft. per minute, and was highly aerobatic. It was just what many sportsman pilots were looking for!
R/C Sport Scale BiPlane
In 1974, Glen Sigafoose, then President of Sig Mfg. Co., acquired a complete Smith Miniplane to use for aerobatic practice. Glen's beautiful red, white, and black aircraft was the inspiration for this mini version of the Miniplane.
9.6V FDK (formerly Sanyo) 8-AA 2500 NIMH cells STYLUS / FUTABA G TX pack. "Twicell" (formerly Eneloop) low self discharge type which comes partially charged and is the same product as prior Eneloop cells. Same size as 700 and 1100 NiCad pack above. Less weight than 1400 NiCads above. Good cell where fast charging is not a needed but extra capacity is desirable. High capacity TX Battery, if you are sick of your TX running down. Yes, it is the same size as your current AA pack. A "AA" is a "AA". This is what your computer TX should have included!
9.6V Weight 312g / 11oz.
Individual Cell Internal Impedance 20.0mΩ
All AA size cells over 1700mAh should not be fast charged ever! If you repeat this experiment, your on your own. I recommend only factory wall wart charging with units rated of 70mAh or less for these type cells.
Break in (first forming charge) on 50mAh factory wall charger 700mAh-19.6 hours,1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mAh wall charger deduct 28% of time, for 100mAh wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty.
Any peak or fast charger use on this pack voids warranty. Don't bother calling trying to get a warranty for failing to follow instructions. I've heard all the stories. They all end like this, "My battery does not cycle well now." and "It worked ok for a while but now it runs down fast shortly after charging". If you put any AA cell over 1700mAh capacity on your peak charger, it's bad. I've already made theses tests for you so you could avoid the pain. If you ruin one of these mega capacity TX packs, just order a new one and do better the second time.
This is one of my favorite motors with many applications. I've used this motor for setups from converting 10 to 25 size models, sailplanes and larger park flier models.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
77g/2.7oz.
27.8mm (1.09") x 32.5mm (1.28")
7-20, 25 15s
4.0mm (1.574")
20k
1220
.058Rm
1.4A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
2
9x5
12.7
95
7,790
18
35
2
9x7
16
120
7,430
21
48
2
10x6
18.9
142
7,120
25
39
2
11x4.7
20.4
153
6,960
26
30
3
8x4
14.7
165
12,010
26
43
3
8x6
19.8
223
11,420
32
63
3
9x5
23.8
268
10,950
39
50
3
10x3.8
25.9
291
10,710
41
37
4
7x6
21.5
323
15,600
37
86
4
8x4
23.2
348
15,380
46
55
5
7x4
22.7
426
19,810
50
71
Estimates based on manufacturers provided constants using E-Calc. High Quality 2100mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
DU-BRO® Large Scale Treaded Lightweight wheels feature a foam interior yet have a tough and rugged exterior skin for durability. Excellent for paved runways!
Hubs come with a 3/16" (5 mm) axle dia. opening and can be drilled out to 1/4" (6.35 mm). The #700TL and #800TL have a 1/4" (6.35 mm) axle dia. and can be drilled out to 3/8" (9.54 mm).
1 wheel/pkg. (not sold in pairs)
TESTED ON AIRCRAFT UP TO 50 POUNDS (22 KG)
Features:
Lightweight
Shock absorbing
Fuel resistant
Built extremely tough
These also have many more applications in school projects and various crafts.
New in box. Astro Micro 020 motor 5 turns with 3.3:1 Gearbox. Motor only.
Specifications:
Motor P/N 803GM-5T
Stator Winding 5 Turns, #20
Motor kv 2567 rpm/volt
Winding Resistance 0.075 ohms
Gear Ratio 3.3 to 1 Kv with Gear Box 778 rpm/volt
No Load Current 1 amp
Maximum Current 25 amps
Maximum Power 300 watts
Maximum Motor Rpm 40,000 rpm
Maximum Prop Rpm 10,000 rpm
Motor Weight 2.5 ounces
Gear Box Weight 1.2 ounces
Motor Length 1.75 inches
Gear Box Length 1.00 inches
Motor Diameter .98 inch (25mm)
Specifications:
Weight
Can Size D x L
Amps
Rated Max Watts
Shaft
Max Motor RPM
KV
Resistance
No Load Current
104.9g/3.7oz.
.98"(24.8mm) x 3.1"(78.6mm) to drive plate
18-25A, 30/30s
Not Pub.
Motor 1/8" Gearbox 1/4"(6.35mm)
40k
2567
7.5mOhm
1A
Setup and Performance Chart
# Cells
Prop
Amps
Watts Input
Lost Watts (Heat)
% Motor Efficiency
RPM
Static Thrust Ounces
Pitch Speed MPH
2
14x10
23.9
179
48
70%
3,880
30
37
3
11x7
20.6
232
41
81%
6,950
37
46
3
11x10
25.6
288
58
78%
6,510
37
62
3
12x8
27.5
309
65
77%
6,340
44
48
4
10x6
22.7
341
51
84%
9,550
47
54
4
10x8
27.4
411
68
82%
9,110
49
69
4
11x5.5
27.7
413
68
82%
9,010
56
47
5
9x4.5
19.7
369
45
87%
12,630
49
54
Estimates based on manufacturers provided constants using E-Calc. 1300 used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
Second from left motor in photo is the 3516 series.
Himax 3516 series motors are most generally used in 34-70 oz models depending on application. Replaces AXI 28 series motors. Manufactured to high standards for the discerning modeler. Package includes collet type prop adapter, prop saver, bullet females for your ESC and fasteners.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
134g/4.7oz.
35.2mm(1.39") x 42.2mm(1.66")
15-40,56 15s
5.0mm (.1969")
20k
1350
.023Rm
2.3A
Setup and Performance Chart
# Cells
Prop
Amps
Watts In
RPM
Thrust oz.
Pitch Speed MPH
2
10x10
26
195
7,710
29
62
2
12x10
39.4
296
5,800
42
54
3
8x6
28.2
317
12,880
42
71
3
9x4.5
31.7
357
12,600
50
51
3
9x6
38.5
433
12,040
56
66
3
9x9
49.4
556
11,150
54
98
3
10x5
44.4
500
11,560
65
53
3
10x7
54.1
609
10,770
70
69
3
11x5.5
58
653
10,450
78
52
4
8x4
32.7
491
17,250
60
62
4
8x6
43.5
653
16,260
68
89
4
9x4.5
48.5
728
15,800
82
64
5
7x6
42.5
797
20,980*
70
115
Estimates based on manufacturers provided constants using E-Calc. High Quality 2200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. * Over reccomended maximum RPM. SKU Number: MPIHC35161350
4S K6 Series 3300. 65C (214.5 amps) Constant 130C (429 amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 380 grams Measures: 139 x 45 x 33mm
Sodium-ion batteries are highly safe, have no risk of explosion and fire, and are environmentally friendly, non-toxic and non-polluting. No memory effect - the battery can be charged in any state of discharge, giving you peace of mind. The working principle of sodium ion batteries is similar to that of lithium-ion batteries, which utilize the insertion and removal process of sodium ions between the positive and negative electrodes to achieve charging and discharging. Example photos show 4-Cell Flat Packs, 4 single cells, and wire configuration examples (apply to 4-cell the same).
Single Cell Specifications:
Nominal Voltage: 3.1V
Work Voltage Range:1.5V-4.1V
Continuous charge /Discharge current:10C
Operating Temperature:-30°-60°
Cycle Life:More than 4000 times (0.5C/0.5C @80% SOH)
Nominal capacity: 1300mAh
Single Cell Dimension: 18.3mm(D)65.3mm Approx.
Weight: 38+- 10 g
Advantage of Sodium ion Battery
1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.
2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.
3. High Power: The cells have continuous discharge current 10C Peak discharge current.
4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.
5. Wild Voltage range: The working voltage range is 1.5V-4.1V.
6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.
7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.
8. Charge on Li-Ion mode set voltage to maximum 3.9-4.1V
This listing is for one 4-Cell battery pack, single cells shown for example only.
SELECT YOUR OPTIONS BELOW TO CUSTOMIZE YOUR BATTERY PACK
The analog HS-225 series represents a good value with performance that rivals other larger and more expensive servos. Ideal for applications that call for a small, lightweight, high speed, high torque servo, the HS-225BB and HS-225MG high performance mini servo's feature a top ball bearing and is built with state-of-the-art SMT technology. Universal connector.
Torque (4.8/6v)
Weight
Speed (4.8/6v)
Bearings
Size SAE
Size Metric
Type
54.15/66.65 oz.in. - 3.9/4.8 kg.cm
0.95oz./ 27g
0.16 / 0.14s
1BB
1.27"x 0.66"x 1.22"
28.96 x 12.95 x 29.97mm
Analog
Choose Quantity Option below. Want 1, 2, or 3 servos? Select first option, then enter quantity 1, 2, or 3. Want a bulk discount? Select 4-Packs, then enter how many 4-Packs you want.
5S K6 Series 3800. 65C (247 Amps) Constant; 130C (494 Amps) Burst. High discharge cells. Industry Standard XH balance plug. Weight: 533 grams. Measures: 140 x 48 x 37mm.
Building on the 20-year reputation of the original Four-Star line of great sport airplanes, we bring you this highly requested version designed for electric power.
Like it's older siblings it retains the easy and relaxed flying characteristics of the Four-Stars. Open the throttle and increase the control throws and it will do about any wild maneuver your thumbs can dream up. Add to this the portability of a smaller size and the quietness and convenience of electric power and you have another winner for sport flying. While designed for electric power it is configured to easily convert to glow engine power in the .15 to .25-engine range so you have the best of both worlds.
Specifications: Wingspan 48 in 1219 mm Wing Area 430 sq. in. 27.7 sq. dm. Length 38 in 965 mm Weight with 250-watt motor & 3s1p 2200 mAh lipo 2-1/2 lbs 1130g Wing Loading 13.4 oz./ft? 40.8 g/sq. dm. Radio Required 4-Channel with 4 mini servos Power Required 250 to 350 watt electric motors or .15 to .25 glow engines Setup and Performance Chart With HiMaxx Motors, Castle ESC and Radical RC Battery
Motor
# Cells
Prop
Amps
Watts
RPM
Thrust oz.
Pitch Speed MPH
FPM Climb @ Degree
Max Climb Angle
Est Top Speed
2816-1220
3
9x5
23.8
268
10,950
40
50
1630@40
58
52
3510-1100
3
9x7
24.5
276
9,880
39
64
1710@37
56
56
3510-1540
3
8x6
35.3
397
13,710
48
75
2314@49
90
62
3510-1100
4
8x6
25.2
378
13,730
48
75
2324@49
90
62
3516-1130
3
10x7
37.9
426
9,820
57
63
2793@65
90
63
3522-700
4
11x5.5
22.7
341
9.01
56
45
2238@55
90
53
3522-990
3
11x7
38.4
432
8,690
61
56
2954@81
90
61
Estimates based on manufacturers provided constants using E-Calc. MFG model specifications used in calculations. High Quality 2100mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. Package weight 4.4lb
FDK (formerly Sanyo) AA 2500 TX pack made to fit Hitec's new Aurora 9 and the Airtronics SD-10G. Excellent way to go when replacing a weak factory pack. 7.2 volts and 6 cells just more capacity. Comes without plug, choose below or reuse your old plug.
Break in (first forming charge) on 50mAh factory wall charger 700mAh-19.6 hours, 1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mAh wall charger deduct 28% of time, for 100mAh wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty. Individual Cell Internal Impedance 25.0mΩ
These motors are for large models weighing 10-12Lb for 3-D flight, 17-22Lb for aerobatic flight and 22-30Lb for leisure flight. High torque to turn large props direct drive. Mounting hardware and connectors included. Himax Brushless motors are manufactured to high standards for the discerning modler. Designed for light-weight, high efficiency, high torque and durability Himax Outrunner motors are sure to make todays radio controlled models perform.
All HC63 series outrunner motors include: Prop adapter, female wire connectors, motor mounting kit w/screws and two hex keys.
Specifications:
Weight
Size D x L
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
450g/15.9oz.
63mm(2.48") x 51mm(2.01")
30-60, 80 15s
8.0mm (.315")
10k
250
.026Rm
2A
Setup and Performance Chart
# Cells
Prop
Amps
Watts Input
RPM
Static Thrust oz.
Pitch Speed MPH
10
15x8
31.9
1187
7,230
156
55
10
15x12
56.8
2215
7,960
237
91
10
16x10
59.8
2332
7,870
268
75
10
18x10
80.3
3132
7,220
337
69
10
16x12
57.3
2625
7,630
276
87
8
16x10
42.6
1329
6,610
184
63
8
18x12
65.8
2053
5,960
249
68
6
20x14
61.9
1448
4,330
198
58
6
22x12
70.3
1645
4,130
224
47
Estimates based on manufacturers provided constants using E-Calc. Kokam 3200 used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
Radical RC Fuel Line Clamps. Size "A" or "Standard". Clamping range (min 3 teeth engaged) OD of 5.6 to 6.5 mm (.220" to .256"). Pro Tip! It's not the OD of the tubing but rather measure the OD of the tubing installed on the barb. Clamps can be reused and are double locking. May be installed without removing tubing if you like. Clamping width is 4.2 mm (.165"). 5 Clamps per package.
Description
Min Diameter - A15.6mm - 0.220" Max Diameter - A26.5mm - 0.256" Band Width - B4.2mm - 0.165" Band Thickness - C1.4mm - 0.055" Head Height - D8.3mm - 0.327" Material Polyamide 6.6 (PA66) Weight 0.001kg/0.002lbs Also Known As Snapper Clamp, Ratchet Clamp, Skiffy Clamp Brand Herbie Clip Country of Manufacture United Kingdom Colour Black Hazardous Goods No Operating Temperature-40°C to +105°C / -40°F to +221°F Flammability Rating UL 94 RoHS Compliant Yes
Features
Double Row of Interlocking Teeth - Doubles Strength Easy to Install with Pliers - also able to wrap around hose on spigot Reusable & Releasable Minimal Leak Path Advanced Tooling for Production Lines Non-Corrosive and Non-Conductive
Geared inrunners can have superior power and efficeincy over outrunners at very favorable weights. Additionally because you can change the gear ratio, many combinations can be acheived making one motor useful over a much wider range of models. Inrunners waste less energy in the form of heat because the windings (the copper) are much shorter thereby getting more of your batteries stored energy to the prop. Designed for low-weight, high efficiency and durability. The HG2015 series gear motors for models ranging generally from 8oz. to 30oz. Depending on gear ratio, battery and prop, this motor can replace anything from a 150 to a 480 type motor.
Specifications:
Weight
Ratios
Amps
Shaft
Max Motor RPM
KV
Resistance
No Load Current
82g(2.9oz)
4.43,5.33,6.6:1
5-12
3mm
60k
4100
.141Rm
.80A
Setup and Performance Chart
# Cells
Ratio
Prop
Amps/Watts In
RPM
Thrust oz.
Pitch Speed MPH
Climb FPM @ 10oz.
Climb FPM @ 16oz.
Climb FPM @ 22oz.
2
4.43:1
10-8
10.6/79
5,140
15
38
2020
1205
834
3
4.43:1
8-6
9.3/104
8,710
18
48
2300
1690
1192
3
4.43:1
8-4.3
10.8/121
8,450
21
43
2606
1917
1354
3
5.33:1
9-7
9.8/110
7,170
19
46
2551
1879
1330
3
5.33:1
10-4.7
9.9/111
7,150
20
30
2369
1737
1220
3
6.6:1
11-7
10.9/122
5,660
23
36
3032
2232
1584
3
6.6:1
11-7
12.3/138
5,490
26
30
3161
2332
1654
Estimates based on manufacturers provided constants using E-Calc. High Quality 700mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.
 "6320 & 6330 Front Mounting (slip over) Prop Adapter")
 "A123/LithiumWerks Life Nano Phosphate 2S 2500mah Receiver Pack")
 "SIG Smith Miniplane kit")
 "Himax HC2816 Outrunner Motor 1220KV")
 "RRC K6 Series 7.4V 2S 2600mAh 65C")
 "Du-Bro 4.0 Inch TREADED LIGHTWEIGHT WHEEL (4.0\"-8.0\")")
 "WM150 WATT METER by Toolkit RC")
 "Astro Flight 020 803GM Geared 3.3:1 Motor")
 "Himax HC3516 Outrunner 1350 KV")
 "RRC K6 Series 3300 14.8V 4S 65C")
 "RRC Gold Bars 33x8mm, Offset Tab, 6-Pack")
 "RRC K6 Series 5100 22.2V 6S 65C")
 "Sodium Na-Ion Battery #18650 12.4V 1300mAh 4-Cell Pack")
 "Hitec HS-225BB Ball Bearing Mini Servo")
 "RRC K6 Series 3800 18.5V 5S 65C")
 "Sig 4 Star 20 EP")
 "RRC K6 Series 4200 18.5V 5S 65C")
 "FDK/SANYO 2500mAh AA NiMH 7.2V 6-Cell 3x2 TX Pack")
 "Himax HC6320-250 Series Outrunner Motor")
 "RRC K6 Series 1300 14.8V 4S 65C, LAST ONE LEFT")
 "Radical RC Fuel Line Double Locking Squeeze Clamp, Size A Standard, 5-Pack")
 "Himax 2015-4100 Brushless Power Geared Inrunner")
