Himax 3522 series motors are most generally used in 34-90 oz models depending on application. Replaces AXI 28 series motors. Manufactured to high standards for the discerning modeler. Package includes collet type prop adapter, prop saver, bullet females for your ESC and fasteners.

Specifications:

Weight	Size D x L	Amps	Shaft	Max Motor RPM	KV	Resistance	No Load Current
162g/5.7oz.	35.2mm(1.39") x 48mm(1.89")	15-38, 54 15s	5.0mm (.1969")	20k	990	.027Rm	2.2A

Setup and Performance Chart

# Cells	Prop	Amps	Watts In	RPM	Thrust oz.	Pitch Speed MPH
2	10x10	20.7	155	6,260	25	58
2	11x10	26.5	199	5,930	32	55
2	12x10	32.7	245	5,580	39	52
3	10x7	30	338	9,220	50	59
3	10x10	38	428	8,710	50	81
3	11x8	41.7	469	8,470	63	63
3	12x8	50.8	572	7,890	75	58
3	13x6.5	53.7	604	8,240	65	76
4	9x7	35	525	12,360	73	80
4	10x7	46	690	11,570	81	75
4	11x5.5	49.9	749	11,290	92	57
5	11x5.5	32.3	606	10,830	84	54
5	8x6	31.7	594	16,070	67	88
5	9x4.5	35.9	673	15,740	81	64
6	8x6	42	945	18,660	91	102

Estimates based on manufacturers provided constants using E-Calc. High Quality 2200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables. * Over reccomended maximum RPM.

SKU Number: KYP3S3000HD65C

Specifications As Per MFG:

Weight	Size D x L	Amps	Shaft	Max Motor RPM	KV	Resistance	No Load Current
55g/1.94oz.	27.7mm (1.102") x 29.5mm (1.091")	19.5A (275 watts)	3.17mm (1/8") x 44.9mm OAL	Non-Pub	Actual 1207 (1300 Claimed)	Non-Pub	Non-Pub

Setup and Performance Chart

# Cells	Prop	Amps	Watts In	RPM	Thrust oz.	Pitch Speed MPH
2	GWS 9x5HD	1.8	89	7,800	18	35
2	APC 9 x 7E	14.9	112	7,470	20	48
2	APC 10 x 6E	17.6	132	7,180	24	39
3	APC 7 x 6E	12.5	141	12,140	21	67
3	APC 8 x 4E	13.6	153	12,010	25	43
3	APC 8 x 6E	18.3	206	11,470	30	63
3	APC 9 x 4.5E	20.6	232	11,200	36	46
4	APC 6 x 5.5E	11.7	176	16,650	22	84
4	APC 7 x 4E	14.5	218	16,300	31	59
4	APC 7 x 6E	19.8	297	15,640	35	86
5	APC 6 x 4E	13	244	20,900	31	75
5	APC 6 x 5.5E	16.8	315	20,390	33	102
5	APC 7 x 4E	20.8	390	19860	47	71

Estimates based on manufacturers provided constants using E-Calc. High Quality 2200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.

1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.

2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards. 

3. High Power: The cells have continuous discharge current 10C Peak discharge current.

4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.

5. Wild Voltage range: The working voltage range is 1.5V-4.1V.

6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.

7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.

8. Charge on Li-Ion mode set voltage to maximum 3.9-4.1V 

This listing is for 1 (one, single cell), multiple cells shown for example only.

TEMPORARILY OUT OF STOCK

This "mighty mini" can take on the most extreme maneuvers while keeping it's cool. Talon 35 is intended for use in 450 Heli setups running up to 6S or .10 to .20 fixed wing applications pulling up to 35 amps and boasts a 7 amp peak/5 amp continuous BEC, keeping even the most draining servos at ease. Talon 35 also offers Castle's industry-leading helicopter functions, not to mention easy programming using the Castle Link USB adapter (coupon included). The compact layout and thin profile make mounting Talon 35 simple and stress-free in any setup.

Input Voltage: 2-6 Lipo
Max Continuous Amperage: 35*
BEC Voltage: 5.5v
BEC Amperage: 5 Continuous, 7 Surge**
Switching Rate 7,000 Hz
Resistance 0.0065 Ohms
Brake yes, programmable
Reversible yes - change any two wires
Size .088 x 1.93 x 0.33 in.
Weight (w/wires) 0.98 oz. (27.8g)
Universal connector

*RC HOBBY APPLICATION RATING: 55 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC's operating temperature.

**Peak indicates amperage sustainable for most servos' current draw transients. Always confirm servo current draw before the first flight of the model.

Castle Creations Warranty Info.

When we started out to design a smaller, quick-to-build, and inexpensive kit, we found that we had the perfect starting point--our Javelin. Its great flying characteristics have made it one of our best-selling kits.

So, we found that by shrinking the original Javelin, simplifying the construction, and lightening parts where possible, what we ended up with is a fantastic flying model -- the Dart!

It's another in our Schoolyard series - a kit you can easily frame up in just a weekend, and once completed, enjoy at a local schoolyard or park.

All of this comes in a great looking design that is remarkably easy to build, thanks to our innovative design techniques and precision laser cut parts.

Although it only weighs just over a pound, ready-to-fly, the Dart's construction gives it surprising rigidity to handle most anything you can throw at it. Loops, rolls, inverted flight, snaps, spins, hammerheads, Cuban-8's, split-S, and more.

And after you're done tearing up the skies, throttle down to easily cruise around the field. Then when the time's right, setup for a nice, controlled landing.

Program in a transmitter flaperon mix, put the aileron servos into separate channels, and then enjoy even slower flights, shorter takeoffs, and slower landings!

Because of the interlocking design and high quality laser cutting of the parts, the Dart is a quick build. Not only does it build quick, but it also builds straight and true as all of the parts were designed to align properly with a minimum of fuss and alignment tools.

The wing is removable, giving access to inside the cabin area. From there, you have easy access to install most any brand of radio and control linkages.

Up-front, we've designed in a large hatch that covers the spacious battery compartment. This area will easily handle up to 1000mAh 2-3s packs.

Specifications:

• Wingspan: 30 inches
• Wing Area: 165 sq inches
• Length (airframe only): 24.5 inches
• Weight: 7-8 oz. framed; 17-20 oz. (rtf)
• Radio: 4 ch. (5 w/flaperons)
• Four 20+ in./oz. servos (Mini servos - similar to HS-5065MG)

Power:

• 100+ watt electric motor, 20+ amp ESC, 2-3s LiPo

Features of the Dart

• Perfect for Small Field Flying
• A low parts count and small size make this kit quick to build and easy to fly at schoolyards, ballfields, and parks.
• Premium USA Hardware
• Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
• Dual Ailerons
• Mounted underwing, these two pre-cut aileron hatches make it easy to install the aileron servos.

WEB-LOCK Construction

There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.

Main gear

Included are the pre-bent main gear legs.

Front Hatch

Held in with magnets, this extra large hatch gives you easy access to swap out the flight battery.

Included Motor Spacers

Included are additional spacers to help position your electric motor at just the right spot, regardless of brand.

Additional items needed to complete the Dart kit:

• Propeller o Motor mount & mounting hardware
• "Y" servo harness (for aileron if 4 channel) or two short servo extensions (if 5 channel w/flaperons)
• Pushrods (two 5" for ailerons, two 14" for elevator & rudder)
• Clevises for the pushrods
• Two 1.5" - 2" diameter main wheels
• Tailwheel
• Covering - 1 roll (more, depending on color scheme) 

Specifications:
Wingspan 37 1/2 sq.in. (952 mm)
Wing Area 338 sq.in. (25 sq dm)
Weight: 26 - 38 oz 737 - (1077 g)
Wing Loading: 11.1 - 16.2 oz/sq ft (423 - 4943 g/sq m)
Radio Required: 2-Channel (ail, ele) or 3-Channel (ail, ele, thr)
Recommended Glow Engines .09 - .19 cubic inch (.58 - 1.23 cc) 2-Stroke

Special notes about electric from Dave: This model makes an excellent electric "muscle" model. Often overlooked since SIG does not offer an e-version or any electric power system setup info. It's easily adapted. Below are my suggestions for a range of practical to extreeme power systems.

Setup and Performance Chart

Motor	# Cells	Prop	Amps	Watts In	RPM	Thrust oz.	Pitch Speed MPH	Climb FPM	Est. Top Speed
Himax 2816-1220	3	8x6	19.1	215	11,500	29	65	1602	60
Himax 3510-1540	3	8x6	34.1	384	13830	42	79	2856	72
Himax 3516-1130	4	9x7	42.9	644	13,310	64	88	4670	86
Himax 2825-2300	3	7x6	38.5	433	15,650	38	86	2538	71
Himax 3514-2900	3	7x6	64.9	724	16,520	44	94	3241	73
Himax 3514-2900	5	7x4	84.5	835	23.310	76	88	5565	87

Estimates based on manufacturers provided constants using E-Calc. High Quality 2100mah used as trial cell in calculations. Presumed model weight of 26oz. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of battery, ESC, and many other factors.

SIG BACKORDER, OUT OF STOCK

Weight 180g/6.37oz.

Adaptable to replace clip packs from early JR and Futaba TX's.

Maintenance charge and maximum form charge rate for this pack is not to exceed 70mAh. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 70mAh. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.

SEE OUR AA NiMH HERE:

https://www.radicalrc.com/item/FDKSanyo-1650mAh-AA-NiMH-9.6V-8-Cell-Square-TX-Pack-51 

Size:

OD of mounting flange: 1.08" (27.5mm)
OD of main gearbox body 1.165" (29.6mm)
OD of motor mounting surface 1.38" (35mm)
Motor Mount Holes: 2 each - 3.3mm (.130"), 25mm on center
Length of gearbox housing 1.44" (36.6mm)
Overall Length W/Shaft 2.050" (52.2mm)

Replaces HS-5685MH. 

The metal D-645MW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec's industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.

Features

Programmable PWM Digital Amplifier
32-Bit MCU with 12-Bit ADC Circuitry
4096 Resolution
1M Cycle Long Life Potentiometer
Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
Dual Ball Bearing Supported Output Shaft
25-Tooth Output Spline

Programmable Functions

End Point Adjustments
Direction
Fail Safe
Dead Band
Speed (Slower)
Soft Start Rate
Overload Protection
Data Save / Load
Program Reset

Accessories

Metal Gears Set | Link |
Metal / Plastic 1st Gear Set | Link |
Plastic Case Set | Link |
Applicable Horns | Link 1 o 2 o 3 |
D645MW Servo Specifications
Performance Specifications

Operating Voltage Range (Volts DC) 4.8V ~ 6.0V ~ 7.4V
Speed (Second @ 60?) 0.28 ~ 0.20 ~ 0.17
Maximum Torque Range oz. / in. 115 ~ 158 ~ 180
Maximum Torque Range kg. / cm. 8.3 ~ 11.3 ~ 12.9
Current Draw at Idle 30 mA
No Load Operating Current Draw 500 mA
Stall Current Draw 2,650 mA
Dead Band Width 2 us

Physical Specifications

Dimensions (Inches) 1.59 x 0.77 x 1.48
Dimensions (Metric) 40.6 x 19.8 x 37.8
Weight (Ounces) 2.11
Weight (Gram) 57.0
Circuit Type 32bit Programable Digital
Motor Type 3 Pole Metal Brush Ferrite
Gear Material Metal
Bearing Type Dual Ball Bearing
Output Shaft (type / ?mm) H25T
Case Material Plastic
Dust / Water Resistance N / A
Connector Gauge (AWG) / Strand Count 22 / 60

Radio Control Applications

Parkflyer N / A
Sport Plane 12 - 15 lbs.
Sailplane 2 meters and up
3D Performance 12 - 15 lbs.
Scale 12 - 15 lbs.
Electric Helicopter 600mm
Gas Helicopter 50 - 59 Class
On Road 1/10th
Monster Truck 1/10th
Buggies 1/10th
Truggies 1/10th
Short Course / Truck 1/10th
Crawlers N / A
Sail Boat = >1M & Scale
Power Boat 1/10th

These batteries are capable of 50 amp constant discharge, with a 10 second pulse rating of 120 amps. Cycle up to 1000 times before significant capacity loss occurs. The rugged assembly of the products will ensure that your pack will last for years, not months. Can be repeatably charged to 100% in 15 minutes. Charge only with Lithium chargers with an A123 (LIFE) mode limiting charge voltage to 3.6V per cell. An Astro Blinky for A123/LithiumWerks is highly recommended as a balancing aid for these cells.

LithiumWerks ANR26650M1B Specifications:

• Manufacturer: LithiumWerks
• Mfg PN: 300832
• Chemistry: Lithium Iron Phosphate (LiFePO4)
• Voltage: 3.3 Volts
• Capacity @ 25°C: 2.6 Ah
• Energy @ 25°C: 8.25 Wh
• Specific Power: > 4000 W/kg (@ 25°C, 2sec pulse)
• Impedance: > 6 mΩ (1kHz AC) Typical)
• Cycle Life: > 4000 Cycles (@ 1C/1C, 100% DOD)
• Dimensions Height (max): 65.15 (+/- 0.5 mm)
• Diameter (max): 25.96 (+/- 0.5mm)
• Product Weight: 76.0 (+/- 1.0 g)

Discharging

Max Continuous Discharge Current 50 A (20C rate)
Max Pulse Discharge Current (10s) 120 A (48C rate)
Minimum Voltage / HPPC Pulse 2 V / 1.6 V
Temperature -30 °C to 60 °C

Charging 

Temperature Range
(reduce charging current to 250mA when under 0 °C)
-20 °C to 60 °C

Storage
Storage Temperature -40 °C to 70 °C

Mechanical
Diameter Ø25.96 +/- 0.5 mm
Length 65.15 +/- 0.5 mm
Mass 76 g +/- 1.0 g

Tech Notes: 

10A Recommended float charge and storage voltage: 3.8V Recommended cut-off current for CV hold: 0.05A Maximum continuous charge current: 10A Maximum allowable charge voltage: 4.2V MAX Fast charge time: 15 minutes Cell discharging parameters: Recommended discharge cut-off voltage: 2.0V Maximum continuous discharge current: 50A Cell temperature parameters (skin temperature) Maximum recommended cell temperature: (158F) Maximum allowable cell temperature: (185F)

They've put everything they've learned about model airplanes into this special kit: scale details, Sig laser cut parts, full size plans, a comprehensive instruction booklet.
All the features you've come to expect from Sig. Then they added a little something special. The new 1/5 Scale J-3 Piper Cub is so real, you may have a hard time separating it from the 1930's full size airplane. All of the details are included - a working side door and window, dummy engine cowls with "eyebrows", scale-like wire landing gear, a fully detailed instrument panel... even the realistic "bird's eye-view" window on top of the cabin. Add in a full decal sheet including Cub lightning bolts and you have a Cub standing far above the rest.

Specifications:
Wingspan 84.5 in 2146 mm
Wing Area 947 sq in 61.1 sq dm
Weight 7 lb 3175 g
Length 55.25 in 1403 mm
Radio Required 4-Channel, 5 Servos

Recommended Engines
.40 - .46 cu in (6.5 - 7.5 cu cm) 2-Stroke
.45 - .65 cu in (7.5 - 10.7 cu cm) 4-stroke

Kit Features
90% laser cut parts for accuracy and ease of assembly
Windshield and engine cylinders
Quality SIG AAA balsa and plywood
A super tough scale-like tail wheel assembly
Full size plans
Molded plastic parts for windows
Fiberglass cowling
A full compliment of quality SIG hardware
Fully illustrated manual to guide you from box to completion

Additional items required:
4 channel radio system with 5 standard servos
.40-.46 2 stroke or .45-.65 4 stroke glow engine
Propeller to fit engine
1 piece fuel tubing - SIGSH286
1 piece 12 ounce fuel tank - SUL429
2 pieces 3-3/8 inch main wheels - DUB338TC
1 piece 1 inch tail wheel - DUB100TW
4 rolls covering material
Optional DuBro Fuel Valve - DUB334

Tools Required:
Thin CA Adhesive
Medium CA Adhesive
Modeling knife with #11 blades
Drill with bits
Dremel Moto Tool with bits
Sanding Block
Sandpaper - Assorted Grits
T Pins

Temporarily out of stock, pending manufacturer production

9.6V Weight 312g / 11 oz.

Individual Cell Internal Impedance 20.0mΩ

All AA size cells over 1700mAh should not be fast charged ever! If you repeat this experiment, your on your own. I recommend only factory wall wart charging with units rated of 70mAh or less for these type cells.

Break in (first forming charge) on 50mAh factory wall charger 700mAh-19.6 hours,1100-30.8 hours,1650-46.2 hours, 2500-70 hours. For 70mAh wall charger deduct 28% of time, for 100mAh wall charger deduct 50% of time. Forming charge (initial charge) on peak detection chargers is not recommended and voids warranty.

Any peak or fast charger use on this pack voids warranty. Don't bother calling trying to get a warranty for failing to follow instructions. I've heard all the stories. They all end like this, "My battery does not cycle well now." and "It worked ok for a while but now it runs down fast shortly after charging". If you put any AA cell over 1700mAh capacity on your peak charger, it's bad. I've already made theses tests for you so you could avoid the pain. If you ruin one of these mega capacity TX packs, just order a new one and do better the second time.

Specifications:

Weight	Size D x L	Amps	Shaft	Max Motor RPM	KV	Resistance	No Load Current
47g/1.66oz.	27.8mm (1.09") x 24.7mm (.97")	5-11, 15 15s	4.0mm (1.574")	20k	1160	.150Rm	.6A

Setup and Performance Chart

# Cells	Prop	Amps	Watts In	RPM	Thrust oz.	Pitch Speed MPH
2	9x5	8.9	67	6,840	14	31
2	9x7	11	83	6,040	15	41
2	10x8	14.6	110	5,650	18	42
3	8x4	10.7	120	10,720	21	39
3	8x6	14	158	10,010	24	55
3	9x5	16.5	186	9,460	28	53
3	9x3.8	14	158	10,010	25	34
4	7x4	11.8	177	14,730	27	53
4	7x6	15.7	236	13,850	29	76

Estimates based on manufacturers provided constants using E-Calc. High Quality 1200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.

4S K6 Series 2200. 65C (143 Amps) Constant, 100C (286 Amps) Burst. High discharge cells.
Weight: 255 grams
Size: 104 x 34 x 37mm

Known compatibility: Hitec HS-56BH, HS-65HB and HS-65MG

Glue on to 2.5mm carbon or solder onto 2.5mm metal rod. Actual ID 2.65mm (.103"). Could also be soldered on to non-threaded end of roll-threaded 4-40 pushrod material or 3/32 music wire. Overall Length 33mm, threaded portion 16mm. 2 per package.

TEMPORARILY OUT OF STOCK 

Brushless motor, 20mm size with added diameter from cooling fins, uses neodymium magnets, carbon case and unique solder posts are manufactured using advanced technologies from finest materials - our standard. Twin ballraced hardened steel shaft and overall robust but very lightweight construction ensure very long lifetime. This small beauties are suitable for use with gearbox or in ducted fans. Tapped hols in front of case match S-400/480 motors making it compatible with many S-400/480 type gearbox's.

I use one of these on a delta and it's sick fast. Enjoy!

Specifications:
Voltage range 6-8 cells
RPM per Volt 6,370 RPM/V
Max. Efficiency with ESC 77%
Max. Efficiency Current 14-22 A (>70%)
Max. loading 28 A / 30 s
No load Current / 8V w gear 3,9 A
Internal resistance 49 mohm
Dimensions with gearbox 24,8x65 mm
Shaft Diameter Gearbox 4 mm
Weight with gearbox 77 g
Recomended model weight 600 - 1200 g
Propeller range VMGM 6,00:1 6 cells prop 12"x8"
VMGM 6,00:1 7 cells prop 11"x7"
VMGM 6,00:1 8 cells prop 10"x6"

Non-warranty; Closeout; No Returns Accepted. 

HC42 Outrunners generally used from 500-1000 Watts. High torque to turn large props direct drive.
Replaces .40-.60 size engines. Mounting hardware and connectors included. Himax Brushless motors are manufactured to high standards for the discerning modeler. Designed for light-weight, high efficiency, high torque and durability Himax Outrunner motors are sure to make today's radio controlled models perform.

Recent report from a .40 size pattern Kyosho Sensation. Pilot reports better than any fuel plane in ever flown in this class. Setup is 5S Kypom 4200, 11x7 APC-E, Castle Edge Edge 75.

Motor includes: Prop adapter, female wire connectors, motor mounting flange.

Specifications:

Weight	Size D x L	Amps	Shaft	Max Motor RPM	KV	Resistance	No Load Current
200g/7.0oz.	42(1.7") x 50.0mm(1.9")	30-42, 60 15s	5.0mm (.2")	12k	770	.02Rm	2.4A

Setup and Performance Chart

# Cells	Prop	Amps	Watts In	RPM	Thrust oz.	Pitch Speed MPH
3	12x10	39	439	6,490	60	64
3	13x8	41.37	465	6,380	69	50
3	13x10	47.5	534	6,560	72	61
3	14x7	45.6	513	6,640	74	43
3	14x10	56.2	632	6,170	82	57
4	11x10	47.6	714	9,070	78	85
4	12x6	42.4	636	9,430	85	52
4	12x8	51.3	770	8,980	94	66
4	13x6.5	54.7	821	8,810	102	53
5	10x8	44.4	829	11,970	89	88
5	11x5.5	44.1	827	11,980	99	60
5	11x7	52.0	975	11,530	109	74
6	9x7	39.5	889	14,890	90	95
6	10x6	47.4	1067	14,410	113	79
6	10x8	57.8	1301	13760	119	102
6	11.5.5	57.6	1296	13780	133	72

Estimates based on manufacturers provided constants using E-Calc. High Quality 3200mah used as trial cell in calculations. Actual performance may vary depending on components used, accuracy of data as provided by manufacturer, quality of ESC, weather and many other variables.

3S K6 Series 3300. 65C (214.5 amps) Constant 130C (429 amps) Burst. High discharge cells.
Weight: 292 grams
Dimension: 139 x 45 x 25mm

TEMPORARILY OUT OF STOCK 

Replace a lost, damaged or rotted fuel tank stopper. For glow fuel only. For all Du-Bro tanks, likely compatible with others. Size: OD Neck .650 (16.51mm), OD Top .750" (19mm), Height .410" (10.4mm)