Brush these highly adhesive resins onto foam models to improve appearance, surface toughness and protect vulnerable foam skin from damage. May be used with glass cloth for an even tougher surface. They will also seal trim, decals and most paints and are over-paintable once dry. These resins require no mixing, have little or no odor and will keep your models looking like new for longer.
Brush these highly adhesive resins onto foam models to improve appearance, surface toughness and protect vulnerable foam skin from damage. May be used with glass cloth for an even tougher surface. They will also seal trim, decals and most paints and are over-paintable once dry. These resins require no mixing, have little or no odor and will keep your models looking like new for longer.
Stix-It is the perfect companion for any model airplane covering material. It has a super strong heat-activated adhesive built right in that keeps your covering material stuck down tight.
Stix-It works great for adhering SIG Koverall, silk, silkspan, tissue, or any other uncoated covering material to a model. Its high solid content and adhesion qualities make it a breeze to cover models with these economical coverings. Stix-It eliminates the messy part of the traditional process. No more need to dope through the covering and rub it down with your fingers. Simply brush a coat of Stix-It on the wood, let it dry, then iron on your covering material.
Stix-It also works great as a surface preparation and wood sealer for any of the pre-finished iron-on coverings, either plastic film or fabric type. The superior adhesion of Stix-It helps eliminate the troublesome pull-ups and lifting seams common with those coverings. It also reduces fuel seepage under the seams of the covering.
Stix-It is the perfect companion for any model airplane covering material. It has a super strong heat-activated adhesive built right in that keeps your covering material stuck down tight.
Stix-It works great for adhering SIG Koverall, silk, silkspan, tissue, or any other uncoated covering material to a model. Its high solid content and adhesion qualities make it a breeze to cover models with these economical coverings. Stix-It eliminates the messy part of the traditional process. No more need to dope through the covering and rub it down with your fingers. Simply brush a coat of Stix-It on the wood, let it dry, then iron on your covering material.
Stix-It also works great as a surface preparation and wood sealer for any of the pre-finished iron-on coverings, either plastic film or fabric type. The superior adhesion of Stix-It helps eliminate the troublesome pull-ups and lifting seams common with those coverings. It also reduces fuel seepage under the seams of the covering.
SKU Number: SIGSX002
Covering Adhesives for RC Airplanes
Covering adhesives prepare a structure and bond covering materials to it, whether you are applying iron-on film to balsa or finishing a foam surface. This category collects adhesives and sealers used in the covering stage of a build.
Film and Balsa Preparation
Coverite Balsarite in its film formula seals and primes balsa so that heat-activated films adhere reliably at the edges, while Sig STIX-IT is a brush-on covering adhesive offered in half-pint and pint sizes for attaching film and fabric.
Foam Finishing
For foam models, Deluxe Materials Foam Finish is available in gloss and matte, giving a surface coat suited to foam rather than open balsa. Choosing the right product depends on the covering and the material underneath, since a sealer meant for film will behave differently from a foam-safe finish. Reading the product notes before you start helps you plan the covering sequence from bare structure to finished surface.
Select an adhesive to match your covering method in the listings below.
 "Deluxe Materials Foam Finish Gloss")
 "Deluxe Materials Foam Finish Matte")
 "Sig STIX-IT Covering Adhesive 1/2 Pint / 8oz")
 "Sig STIX-IT Covering Adhesive Pint / 16oz")
