TX Connectors Sub-Category within Radio Plugs & Wire.

Transmitter Pack Forming Charge Chart

Capacity	Chemistry	Form Charge Hours @50mah	Form Charge Hours @70mah	Form Charge Hours @100mah	Form Charge Hours @150mah	Peak Charge After Forming	Discharge Current
700	NiCad	19.6	DAMAGE	DAMAGE	DAMAGE	.4 to 1.4 amps	100-200mah
1100 (MFG Discontinued)	NiCad	30.8	22	15.4	DAMAGE	.6 to 2.2 amps	200mah
1650	NiMH	46.2	33	23.1	15.4 Not Advised	.8 to 3.3 amps	300mah
2000	ENELOOP NiMH	56	40	28	DAMAGE	NEVER! Will Ruin	400mah
2500	NiMH	70	50	35	DAMAGE	NEVER! Will Ruin	500mah

Charger presumed to be factory wall charger. Peak chargers are poor choice for forming, you'll struggle. Peak charging is only reliable after proper form charging. Form charging when new is a MUST. Repeat form after 30 days or more storage or after any replacement of cells in pack. Most packs will reach the good zone (85% of rating or better) within 3 to 5 cycles. They continue to improve slowly over further cycles. We have seen some cells require 10-15 cycles to hit full stride. You do not have an issue if you formed the pack properly and it's continuing to improve (no mater how slowly) over a number of cycles. Simply keep cycling it. We only want to hear about it if you have formed it properly, have at least 6 cycles of data "recorded on paper" and the results are staying flat or reducing. Your data sheet is required with the pack upon return. All other packs will be returned to you.

There is no warranty, return or telephone consultation available if you failed to form charge your pack as described above. Learn from your errors and order a replacement. I've been though this hundreds of times, the proper and reliable methods are established. Anything outside of these proper methods is experimentation at your expense.