Glow plug cord, Locks onto any standard or 4 cycle plug. Add power panel connectors, connect to 1.5v starting battery or solder to your driver battery. SKU Number: DUB337
Glow plug cord extra long with 3" of reach. Locks onto any standard or 4 cycle plug. Add power panel connectors, connect to 1.5v starting battery or solder to your driver battery. SKU Number: DUB338
Parts kit you need to power your glow plug remotely. Special fitting twist-locks onto your plug. Mount the "simulated" plug and bracket anywhere you find it easy to reach. Your glow battery will clip onto it just like it was the real plug. Yet, fingers are safe and the port is hidden where you want it.
Standard size kit with 5/8" reach glow plug adapter.
Parts kit you need to power your glow plug remotely. Special fitting twist-locks onto your plug. Mount the "simulated" plug and bracket anywhere you find it easy to reach. Your glow battery will clip onto it just like it was the real plug. Yet, fingers are safe and the port is hidden where you want it.
A must for cowled engines, helicopters, & general safety by avoiding the fast turning propeller. Each kit includes a glow plug connector, a ground wire, and a dummy plug for remote power connection. Normally about 1/16" of boot must be trimmed off so the boot sets on top of the hex, not pressed over it. Wire springs backward, a tooth inside locks onto the groove in the tip of the plug. Smooth tip plugs like McCoy's, use the McDaniel product.
5/8" long. Hooks onto glow plug just like a Ni-Starter does. Comes with 12" red Teflon wire. Use this hard to find part to build your own remote glow plug adapter setup.
1" long. Hooks onto glow plug just like a Ni-Starter does. Comes with 12" red Teflon wire. Use this hard to find part to build your own remote glow plug adapter setup.
For about the cost of 1 glow plug, you can keep your good used ones protected and organized so you can find it when you need it. Loose plugs rolling around in your field box can accumulate dirt and grit, when you later use the plug you introduce this trash to the inside of your engine. This caddy stores up to 9 glow plugs. Injection molded from a brightly colored sturdy rubber like plastic material. The CADDY measures only 2" x 3" and does a big job for you.
Accepts your glow driver and allows mounting the access point in a safer or more convenient location. May be mounted under motor mount lug. If mounted away from motor, a ground wire must be fashioned to run from a motor mount bolt to the mounting tab of the remote glow fitting. Save your fingers. Special Wire Clip attaches to tip of glow plug.
 "Du-Bro Kwik-Klip II Glow Plug Cord")
 "Du-Bro Kwik-Klip II Extra Long Glow Plug Cord"){kind=small}
 "Glow Plug Igniter, Medium, 64mm, w/Battery Charger")
 "Glow Plug Igniter, Long, 84mm, w/Battery Charger")
 "Glow Plug Igniter Only, Short, 44mm")
 "Glow Plug Igniter Only, Medium, 64mm")
 "Glow Plug Igniter Only, Long, 84mm")
 "Battery Charger Only (for Radical RC Glow Plug Igniters)")
 "Maxx Flying Glow Plug Remote Adaptor")
 "Glow Plug Igniter, Short, 44mm, w/Battery Charger")
 "McDaniel 5/8\" Remote Glow Plug Adapter Kit")
 "McDaniel 1\" Remote Glow Plug Adapter Kit")
 "McDaniel 5/8\" Glow Plug Adapter Head Only")
 "McDaniel 1\" Glow Plug Adapter Head Only")
 "Glow Plug Caddy")
 "Remote glow adapter with Wire Clip")
