Another Bill Becker Masterpiece!

Bill Becker's Miss Tiny
Bill Becker's Miss Tiny

Miss Tiny, Built from plans of a 1940’s Modelcraft kit. The original (built by Paul Kugler) is in the Smithsonian. The model is covered in Japanese tissue aquired from Shorty’s Basement. Bill reports the tissue from Shortys is absolutely the best, even going over compound curves nicely. The wheels look like Trexlers but are actually made from balsa. Check out the little fill tubes made from a section of black wire insulation. Powered by a GWS IPS drive system. They’ve been out of stock lately so he built the motor system from broken bits in the spares box. Originally a 46″ x 6″ cord free flight model designed for a Ohlsson “23”, Phantom or Trojan.  Reduced to 36″ for the drive system.

Bill Becker's Miss Tiny
Bill Becker's Miss Tiny

The plans where hard to find, paid dearly, a friend of a friend had them. Had to meet them in London Ohio, piched in $20 for fuel, bought the man a huge $15 breakfast at Bob Evans, reduced them at Kinko’s, ($5) and returned the original. Model is 3 channels, IPS-A drive with 8-6 prop. It’s probably only pulling 10 watts with that small prop! Flys on a 2S Kypom 450, Berg 4L RX. Flying weight is 7.4 ounces. Airfoil is slightly undercambered. Model was framed up with electronics installed in about 15 hours. About 2.5 hours to cover. Bill says CA lets him really move fast. Although Bill seldom builds models larger than this, he likes how this model flys so well he’s planning on building the full size version.

Bill Becker's Miss Tiny
Builders are Happy people!

Bill got inspired after seeing a picture in a book book about models in the Smithsonian Air and Space Museum he purchased for only $2. The museum model was Yellow with black trim. All the wood, electronics came from Radical RC. Built by Bill Becker of the Springfield Model Airplane club. This guy knows how to glue two sticks together!

Book, On Miniature Wings: Smithsonian Book Store

Share