|
| |
Maxx Products Radial Mount for Himax HC 28xx Series Motors. Also fits AXI (Model Motors) 22xx series motors.
SKU Number: MPIHC2808-9
|
|
|
|
|
| |
Use for it's heat sink feature, also adapts 20mm motors into 300 brushed motor fan housings such as the stock EDF-55 and EDF-64 housings or any other housing intended for a S300 sized brushed motor.
SKU Number: GWACS019
|
|
|
|
|
| |
Fits 35 series Himax and many ohter outrunners. Same part as included with Multiplex power packs.
SKU Number: MPIACC3646
|
|
|
|
|
| |
Use between heat sink and motor for better thermal contact. Due to surface imperfections, the heats sink is usually only touching the motor case in a few locations. The balance of the area is filled with a thin film of air. The compound is designed to fill this gap and conduct heat more rapidly than air. When you heat sink is in better contact, your motor will run even cooler. The compound is not electronically conductive. Use in a think layer, the ideal is fill the would-be air gap, not to hold the sink off the motors surface.
SKU Number: RRCHSC
|
|
|
|
|
| |
Star mount fits most 28mm outrunners. Fits our Maytech 2830 and 2836 series motors and most other imported motors in this size class using similar looking star mounts. Motor bolt holes are .625" (15.8mm) on center for one pair and .730" (18.54mm) on center for the other pair. Outside holes are 1.375" (35mm) on center. 1/8" Thickness, overall OD 1.870" (47.5mm) 3D printed solid ABS part. Center hole .400" (10mm). See all our motor mounts and heat sinks for motors 28mm and smaller.
SKU Number: RRCSTARMM28MT
|
|
|
|
 "Himax Motor Radial Mount for HC28xx Series Motors")
 "GWS 20mm Heat Sink / Adapter to S-300 Fan Housings")
 "Motor Mount Plate for Fun Jet Ultra")
 "Heat Sink Compound 1.5g")
 "Motor Mount Star 28mm Outrunners")
