|
|
Schottky Diode LargeUsed in a similar way as capacitors are used to quiet RF interference emitted by motors. Also blocks generated electricity from coasting motor going back into ESC. Install across motor input leads close to motor, band towards the positive terminal on the motor. Use this size for motors S-480 and larger (motors over 14 amps). SKU Number: RRCSCHOTTKYL
|
|
|
|
|
Schottky Diode SmallUsed in a similar way as capacitors are used to quiet RF interference emitted by motors. Also blocks generated electricity from coasting motor going back into ESC. Install across motor input leads close to motor, band towards the negative terminal on the motor. Use for motors S-400 and smaller (14 amps or less). SKU Number: RRCSCHOTTKYS
|
|
|
|
|
GWS GS 600E 30 amp control With Brake30 AMP control with BEC and Brake. More versitile, capable of flying anything S-600 and below that is 30 amps or less. Weight 20g, Size 37x23.5x7mm. GWS Products warranty info. SKU Number: GWGS600E
|
|
|
|
|
GWS GS100 5 amp control with BrakeSame as ICS100 except GS version has brake. 5 AMP control with BEC. These are known to be good to a couple amps above factory rating. GWS Products warranty info. SKU Number: GWGS100
|
|
|
|
|
GWS ICS 300 8 amp control8 AMP(15A max) control with BEC. Capable of flying any brushed motor S-370 and below. Also suitable for smaller motors such as GWS IPS (Indoor Power System) powered model such as Pico Stick, Lite Stick, Cub, Tiger moth etc. Specifications: Weight with Wires 10g (.35oz) BEC cut off votage: 4.2 BEC Output: 5V/1.2 amps Size: 25.5x12.5x9.0mm (1.0x0.49x0.35") Cells: 5-8 Ni Cells, 2-3 Lipo (Do not fly Lipo to BEC cut off) Amps: 8 constant, 15 max Use provided heat sink if loads near top of range. GWS Products warranty info. SKU Number: GWICS300J
|
|
|
|
|
GWS ICS 300E 8 amp control, Low Voltage8 AMP(15A max) control with BEC. Special control primarily intended for lower voltage packs like 1S Lipo or 3-5 Ni Cells. Makes low voltage projects workable where as typical ESC's (non-low voltage) cut off voltages are too high not allowing you to empty (or use majority) of your battery charge. Capable of flying any brushed motor S-370 and below. Also suitable for smaller motors such as GWS IPS (Indoor Power System) powered model such as Pico Stick, Lite Stick, Cub, Tiger moth etc. Specifications: Weight with Wires 10g (.35oz) BEC cut off votage: 3.2 BEC Output: 5V/1.2 amps Size: 25.5x12.5x9.0mm (1.0x0.49x0.35") Cells: 3-8 Ni Cells, 2-3 Lipo (Lipo BEC cut off for 1S only) Amps: 8 constant, 15 max Use provided heat sink if loads near top of range. GWS Products warranty info. SKU Number: GWICS300E
|
|
|
|
|
GWS ICS 400 15 amp control15 AMP control with BEC. . More versitile, capable of flying anything S-400 and below and will handle most 480 setups as well. Note, this control is inexpensive and works well. Specifications: Weight 17g Size 27.5x19.5x6mm GWS Products warranty info. SKU Number: GWICS400J
|
|
|
|
|
GWS ICS 400 15 amp control With Brake15 AMP control with BEC and Brake. More versitile, capable of flying anything S-400 and below and will handle most 480 setups as well. Note, this control is inexpensive and works well but is about 3x as big as a GFS 12 or Castle 20. Weight 17g, Size 27.5x19.5x6mm. GWS Products warranty info. SKU Number: GWICS400GS
|
|
|
|
|
GWS ICS 480 15 amp control15 AMP control with BEC. Universal connectors. More versitile, capable of flying anything S-480 and below. Note, this control is inexpensive and works well but is about 3x as big as a GFS 12 or Castle 20. Weight 14g, Size 25.5x12.5x9mm. GWS Products warranty info. SKU Number: GWICS480J
|
|
|