|
| |
Astro Flight Servo Tester #105Simulates a receiver so you can test your motors and servos without having to use your radio. Product Specifications Mininim Pulse width 1 millisecond Maximim Pulse width 2 milliseonds Pulse Voltage 5 volts BEC Load Test 500 ma Length 2.5 inches Width 1.5 inches Height 1/2 inch Weight 1 ounce Connectors pin Header Controls your speed control by providing a variablepulse that simulates the output signal of an RC radio receiver. Also has BEC load test function. Now you can run your electric system without needing to use your radio.
SKU Number: AST105
|
|
|
|
|
| |
Hitec HFP-30 Digital Servo Programmer/TesterThe Lightweight HFP-30 Field Programmer is the latest in digital servo testing and programming. Packed with advanced features and a large, easy-to-read LCD screen, it efficiently programs all Hitec digital servos, including the HS-5XXX, HS-7XXX, brushless HSB-9XXX, and the latest D-Series. Operating on a wide voltage range of 4.8~8.4, the Hitec HFP-30 is your hobby's best, must-have accessory.
SKU Number: HRC44427
|
|
|
|
|
| |
Peak Electronics Servo Driver/Analyzer with Meter (CEL 1430)Peak Electronics Servo Driver Analyzer with built-in current meter. It also operates off a single 4.8 Volt receiver battery pack. There are 4 modes of testing and analyzing servos.
Mode 1 operates a servo (or electronic speed control) from stop to stop as the knob is turned.
Mode 2 automatically centers the servo so the linkage can be perfectly adjusted without a transmitter.
Mode 3 continuously exercises the servo at high speed to one stop and returns, pauses at center, moves to the opposite stop, and back to center. The cycle then repeats.
Mode 4 slews the servo slowly from stop to stop every 2 seconds.
The current drain and movement of the servo indicates a number of health factors such as noisy pot, binding servo gears or linkage, stripped gears, and many more. The Servo Driver Analyzer is also useful for breaking in your new servos.
Instruction sheet included.
SKU Number: CEL1430
|
|
|
|
|
| |
Maxx Products MX 8340 Servo Driver ProSimulates a receiver so you can test your motors, ESC and servos without having to use your radio.
Controls your speed control by providing a variablepulse that simulates the output signal of an RC radio receiver.
Power requirement: 4.8-6 Volt Battery or BEC.
Precise Centering Indicator
Servo Cycler Feature
Easy connection and operation.
Universal connectors.
SKU Number: MPIMX8340
|
|
|
|
|
| |
Hitec PC Interface HP22Features
Plug & Play USB Interface
Easy Operation with Downloadable PC Program
PC Interface for Hitec 2.4GHz Telemetry Monitoring System
(requires sensor station and optional sensors) Applicable Models
Receiver: Freedom 9S, Optima 6, 7, & 9
Transmitter: Optic 6 Sport 2.4GHz, Aurora 9
Transmitter Module: Spectra 2.4 Functions
Radio, Module, and Receiver Firmware Upgrade
Radio, Module, and Receiver Data Setting
Data Save and Load to PC
Data Reset
Auto Version Check
SKU Number: HRC44470
|
|
|
|
|
| |
HPP-21 PC Programmer for Hitec Digital ServosFeatures
PC Programmer for Hitec Digital Servos
PC Based Digital Servo Programmer and Tester
Programs all Hitec Digital Servo Parameters
Tests all Brands of Servos
Free Downloadable Software
USB PC Connection Port
SKU Number: HRC44440
|
|
|
|
|
| |
Hitec PC Interface HP21+Features
PC and Field Programmer for Hitec Digital Servos
Digital Servo Field/PC Programmer and Tester
Programs all Hitec Digital Servo Parameters
Tests all Brands of Servos
Free Downloadable Software
USB PC Connection
Less Expensive Alternative to HFP-20
SKU Number: HRC44460
|
|
|
|
 "Astro Flight Servo Tester #105")
 "Hitec HFP-30 Digital Servo Programmer/Tester")
 "Peak Electronics Servo Driver/Analyzer with Meter (CEL 1430)")
 "Maxx Products MX 8340 Servo Driver Pro")
 "HPP-21 PC Programmer for Hitec Digital Servos")
 "Hitec PC Interface HP21+")