20-Piece in handy case. We've examined every one to be sure it's full and sealed in a plastic bag. Some of these bits are as small around as splinters!
Brad point bits are used in non-metal applications only. Perfect for wood! The center point of the drill will make the bit track much straighter through wood than any other kind of bit. These bits are also to easier to get nice exit hole with less tear out. It's even possible to drill holes with part of the bit off the edge of the wood. Brad points are a secret of real craftsmen!
Great for deburring the inside of cut off brass/aluminum tubes. Use to relieve the edge of drilled & threaded holes. 82 degree cut.
Important Tip: The area right around the edge of a threaded hole can "ant hill" upwards when a fastener is tightened. This "ant hill" can mean only the very edges of the hole are pressed against the the bottom of the bolt head (or motor lug) and are in contact with the surface. Champfering the edges of the hole a little means the contact patch is moved outward from the hole edge making for more actual contact area. Any ant-hilling occurs inside the chamfer where it cannot interfere. Carbon steel. 1/2", 5/8" and 3/4".
 "Replacement Number (Wire Size) Drill Bits")
 "20 Piece Metric Micro Bit Set .03-1.6mm")
 "4 Piece Mini SAE Drill Bit Set")
 "8pc Brad Point Bit Set")
 "Brass Pin Vice")
 "3pc Counter Sink Set")
 "1/32 Replacement High Speed Drill Bit")
 "1/16 Replacement High Speed Drill Bit")
 "5/64 Replacement High Speed Drill Bit")
 "3/32 Replacement High Speed Drill Bit")
 "7/64 Replacement High Speed Drill Bit")
 "1/8 Replacement High Speed Drill Bit")
 "9/64 Replacement High Speed Drill Bit")
 "5/32 Replacement High Speed Drill Bit")
 "11/64 Replacement High Speed Drill Bit")
 "3/16 Replacement High Speed Drill Bit")
 "13/64 Replacement High Speed Drill Bit")
 "7/32 Replacement High Speed Drill Bit")
 "15/64 Replacement High Speed Drill Bit")
 "1/4 Replacement High Speed Drill Bit")
