High performance Powerpole crimp tool for a reasonable price. Crimps all three sizes of Powerpole contacts; 15, 30 and 45 amp. Ratcheted mechanism assures proper crimps every time. Contact positioner holds contacts correctly while crimping. Far faster and better than soldering. The highest strength and the lowest resistance connections possible. Long high leverage handle makes even 45 amp 10 gauge crimps easy. Dimensions H,W,D 7.75" X 3" X 1.5" Weight 20 ounces Contact retention force, 15, 25 amp contacts More than 25 pounds Contact retention force, 45 amp contacts More than 35 pounds.

Detail list of items in the set:

Pro Grade Tools:
A crimper
A combination wire cutter/stripper
Connectors:
BEC male & female, 6each.
JR Male connectors, 20 each.
JR female connectors, 20 each.
Pro Grade Heat Shrink:
3' of 1/16"
3' of 3/32"
3' of 1/4"
2' of 3/8"
Wire:
50', 22g Twisted HD,
25', 22g Ribbon HD,
15', 22g 2 Pole Battery Ribbon,
25', 26g Ribbon-Std,
15', 30g Micro Lite Ribbon

All components are organized in a rugged resealable storage box. Imagine, when you need something, knowing exactly where it is!
These components and tools are the same professional grade that Radical RC uses in house.
Storage Box Dimensions 14" x 8.5" x 2"
Total Weight 2lb, 15 ounces

TEMPORARILY OUT OF STOCK 

Detail list of items in the set:

Pro Grade Tools:
A crimper
A combination wire cutter/stripper
Connectors:
BEC male & female, 6each.
Futaba Male connectors, 20 each.
Futaba female connectors, 20 each.
Pro Grade Heat Shrink:
3' of 1/16"
3' of 3/32"
3' of 1/4"
2' of 3/8"
Wire:
50', 22g Twisted HD,
25', 22g Ribbon HD,
15', 22g 2 Pole Battery Ribbon,
25', 26g Ribbon-Std,
15', 30g Micro Lite Ribbon

All components are organized in a rugged resealable storage box. Imagine, when you need something, knowing exactly where it is!
These components and tools are the same professional grade that Radical RC uses inhouse.
Storage Box Dimensions 14" x 8.5" x 2"
Total Weight 2lb, 15 ounces

SKU Number: RRCMWCCSF

Included: 25 Feet JR/Spektrum Color Coded Servo Heavy Duty Twisted 22ga Wire
10 each Male End Connectors
10 each Female End Connectors
Radcial RC Connector Crimp Tool

SKU Number: RRCMCCSJR

Included: 25 Feet Futaba Color Coded Servo Heavy Duty Twisted 22ga Wire
10 each Male End Connectors
10 each Female End Connectors
Radcial RC Connector Crimp Tool

SKU Number: RRCMCCSF

A commercial quality wire bender, built specifically for the hobby industry. Complete Tool -Wire range: .062" - 0.093" / 1.45mm - 2.40mm). This will bend wire from 0-90 degrees and makes perfect Z bends, L bends, landing gear & more! It's design was made to be a perfect addition to your workshop. It can be easily mounted to the work bench, or it can be placed on your bench vice. This unit made for wire .062" to .093".

TEMPORARILY OUT OF STOCK 

K & S Engineering Tubing Bender Kit handles 1/16" to 3/16" Brass, Aluminum and Copper tubing. Supports the tubing and creates a kink-less bend. Insert tubing into the bender, then bend around a dowel or bar stock. Includes four different sizes of benders. Spring tubes fit over your tube and allow bending without kinking. I've used a set of these for years. For tighter bends, a little care must be taken to work the spring off the tube as you keep adding to the degree of bend. Simple concept works very well. Carded packaging.

TEMPORARILY OUT OF STOCK 

4 sections of 1/8" brass tubing included.

4 sections of 5/32" brass tubing included.

Bend your own landing gear. Suitable for music wire up to 5/32" diameter. Mounts block in vise, insert wire and pull handle. Couldn't be any simpler. Now you can make that custom gear exactly the way you want it. Also handy for other metals like solid brass and aluminum craft work.

TEMPORARILY OUT OF STOCK 

Heavy-Duty Construction Z-Bend Pliers for wire up to .062 (1/16") from hanger 9

TEMPORARILY OUT OF STOCK, MANUFACTURER BACKORDER 

Famous Higley bender for 1/8" and 3/32" brass and aluminum tubing. Great tool for making up your own tank and fuel plumbing hardware. Supports side walls of tubing to allow you to bend quite tight radii without kinking.

Harry Higley's Zee Bender for 2-56 thru 3/32" size wire. Made with hardened steel pins. Can make Z bends, 90's, U's and etc. in soft or hard material such as aluminum, brass and music wire. Useful for any wire 3/32" or smaller. Simply mount hex base in your vise, put wire between pins and pull a bend around the pin.

SOLD OUT, MANUFACTURER BACKORDER

Harry Higley's Zee Bender for 5/32" size wire. Made with hardened steel pins. Can make Z bends, 90's, U's and etc. in soft or hard material such as aluminum, brass and music wire. Useful for any wire 5/32" or smaller. Simply mount hex base in your vise, put wire between pins and pull a bend around the pin.

OUT OF STOCK 

Harry Higley's Zee Bender Set for 1/16", 3/32" and 5/32" wire. Made with hardened steel pins. Can make Z bends, 90's, U's and etc. in soft or hard material such as music wire. Set of 3 bending tools. Simply mount hex base in your vise, put wire between pins and pull a bend around the pin.

TEMPORARILY OUT OF STOCK 

This is the crimp tool made just for our type of connector pins. This tool crimps the wire tighter than any other we've tested. Use this tool to make custom harnesses, do your own battery connectors or modify existing wiring.