$7 Minimum Shipping — USA Addresses See checkout for all options. Insurance automatically added to all USA orders over $50. $13 Minimum Shipping — All Phone Orders Worldwide shipping — see checkout for shipping options.
New from Maxx Products. On/off Switch with Soft mount and built in charge jack. We added a 3-LED on-board battery checker to our best-selling Soft Mount One-Piece Charge Switch. The three LEDs - green, yellow, & red - monitor the status of Rx pack under actual load. It is compatible with both 4.8V and 6V flight systems. Mounting cut-off area for this switch: 1.3" x 0.5"
Heavy Duty Switch with Charge Jack and Indicator Light Futaba. Avoid leaving your tattle tale charge lead hanging out by using this switch with built in charge jack. Heavy duty switch inside so it is appropriate for any giant scale application. Also accepts JR/Hitec/Airtronics plug. Heavy duty 22 gauge wire. Ultimate in switching reliability and convenience. This switch is specially designed for the power supply of receiver, ignition, and electric model supply.
Heavy Duty Switch with Charge Jack and Indicator Light JR/Hitec/Airtronics. Avoid leaving your tattle tale charge lead hanging out by using this switch with built in charge jack. Heavy duty switch inside so it is appropriate for any giant scale application. Also accepts JR/Hitec/Airtronics plug. Heavy duty 22 gauge wire. Ultimate in switching reliability and convenience. This switch is specially designed for the power supply of receiver, ignition, and electric model supply.
Giant scale size switch. Soft mount and built in charge jack. Onboard battery checker for MPI HD Charge switch w/ LED Indicator for 7.4 volt LiPoly/Li-ion cells w/ genuine Dean's plugs & Dual Universal RX Plugs. 3-LED on-board battery checker with three LEDs - green, yellow, & red - monitor the status of Rx pack under actual load. Switch has Deans input for battery and two universal outputs to carry plenty of current to your hungry servos.
Giant scale size switch. Soft mount and built in charge jack. Onboard battery checker for for 7.4 V LiPo/Li-ion cells ONLY. 3-LED on-board battery checker with three LEDs - green, yellow, & red - monitor the status of Rx pack under actual load.
New from Maxx Products. On/off Switch with Soft mount and built in charge jack. We added a 3-LED on-board battery checker to our best selling Soft Mount One-Piece Charge Switch. The three LEDs - green, yellow, & red - monitor the status of Rx pack under actual load. It is compatible with both 4.8V and 6V flight systems.
Avoid leaving your tattle tale charge lead hanging out by using this switch with build in charge jack. Little tab opens and closes dust cover over charge receptacle. Shown open here. Heavy duty switch inside so it is appropriate for any giant scale application. JR Colored Wire is 22 gauge, switch is double row knife, with JR plugs. Ultimate in switching reliability and convenience.
Avoid leaving your tattle tale charge lead hanging out by using this switch with built in charge jack. Little tab opens and closes dust cover over charge receptacle. Shown open here. Heavy duty switch inside so it is appropriate for any giant scale application. Switch is double row knife. Ultimate in switching reliability and convenience. Futaba J plugs, with heavy duty Futaba colored 22 gauge wire Red/Black and white wire. Great in giant scale a/c.
Avoid leaving your tattle tale charge lead hanging out by using this switch with built in charge jack. Little tab opens and closes dust cover over charge receptacle. Shown open here. Heavy duty switch inside so it is appropriate for any giant scale application. Wire is 22 gauge and switch is double row knife. Ultimate in switching reliability and convenience. Use in up to 1/4 scale.
Avoid leaving your tattle tale charge lead hanging out by using this switch with built in charge jack. Little tab opens and closes dust cover over charge receptacle. Shown open here. Heavy duty switch inside so it is appropriate for any giant scale application. Wire is 22 gauge and switch is double row knife. Ultimate in switching reliability and convenience. Use in up to 1/4 scale.
Charge pigtail incorporated into removable flag type switch. When pin is inserted into switch, power is switched off. Pull pin and model comes on and stays on until pin is inserted in switch again. I generally don't favor the use of single contactor switches in high vibration enviroments. These have been used in those types of models for some time with good success however there is no redundancy in this type switch. These should only be used in low vibration models such as electrics and sailplanes.
Highly visabillity red with "Remove Before Flying" logo on flag. Order in pairs and get $1 off each, select option below.
RRC Heavy Duty On/Off Switch Harness JR. Includes receptacle for charging jack plug. 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Excellent choise for heavy duty or large applications. Direct replacement fit for all helicopter applications. Vibration resistant.
RRC Heavy Duty On/Off Switch Harness Futaba J. 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Excellent choice for heavy duty or large applications. Direct replacement fit for all helicopter applications. Vibration resistant.
ATX Style heavy duty switch harness without charge jack. 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Order in pairs for $1 off each, select option below.
ATX Style standard switch harness. 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Order in pairs for $1 off each, select option below.
JR/Hitec/Airtronics Z(new) Style standard switch harness with charge pigtail. Heavy Duty 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Order in pairs for $1 off each, select option below. Unlike factory switches, ours are made with gold plated pins and heavy 22 gauge wire.
Futaba J style standard switch harness with charge pigtail. Heavy Duty 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Order in pairs for $1 off each, select option below. Unlike factory switches, ours are made with gold plated pins and heavy 22 gauge wire.
Futaba J Style standard switch harness. 22 gauge leads, double row knife type switch, gold pins. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. This Surface switch does not have a charge pigtail like Aircraft switches do. Typically used in RC Cars/Trucks/Boats etc where RX battery easy to plug directly into for charging.
JR/Hitec/Spektrum/Universal Style standard switch harness. 22 gauge leads, double row knife type switch, gold pins. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. This Surface switch does not have a charge pigtail like Aircraft switches do. Typically used in RC Cars/Trucks/Boats etc where RX battery easy to plug directly into for charging.
Super tiny, "Grain of Wheat" switch & harness. 28 gauge leads, single row knife type switch. Very low amperage for switching onboard electronics on and off. Don't try to switch your motor with this or POOF! Weight 0.6g/0.02oz. Leads are 3 inches. No mounting screws.
SKU Number: RRCSWGW
RC Switches and Switch Harnesses
The power switch is the one link between your battery and the receiver, so a solid switch harness is cheap insurance against an in-flight shutdown. This category collects switches and harnesses for turning onboard RC systems on and off.
Monitoring Switch Harnesses
Several MPI Onboard Switch Harnesses add a 3-LED voltage monitor so you can check pack condition at a glance. Versions are offered for 4.8V and 6V packs as well as 7.4 volt LiPo and Li-ion cells, with connector choices such as Futaba, JR, Spektrum, Deans, and universal.
Heavy Duty Switches
For larger current draws, Heavy Duty Switches with a built-in charge jack and indicator light let you charge without unplugging, in Futaba and JR/Hitec/Airtronics connector styles. The charge jack simplifies topping off a flight pack. Choosing a harness comes down to your battery type and the connectors already on your receiver, so matching those keeps installation simple.
Select a switch or harness to match your pack and radio below.
 "Heavy Duty Switch with Charge Jack and Indicator Light Futaba")
 "Heavy Duty Switch with Charge Jack and Indicator Light JR/Hitec/Airtronics")
 "MPI Onboard Switch Harness Heavy Duty 3-LED Voltage Monitor for 7.4 V LiPo/Li-ion cells w/JR/Spektrum/Universal conn.")
 "Heavy Duty Switch with Charge Jack with JR/Hitec/Air New/Spektrum/Universal plugs")
 "Heavy Duty Switch with Charge Jack w/Futaba J plugs")
 "Standard Switch Harness Futaba J w/Charge Pigtail")
 "Futaba G (Old Style) Standard Size Switch Harness")
 "Switch Harness Futaba J Surface")
 "Switch Harness JR/Hitec/Spektrum/Universal Surface")
