Features 8 drawers, assortment of dividers for the thinner drawers. Built in transmitter rack and glow plug caddy. Power panel opens up to access additional storage space. Loop-Key cutouts for retaining your 1/2 gallon fuel bottle or 1 gallon fuel can with rubber bands or Vecro strip. False floor lifts out easily for service and replacement of your 12v battery. Has a rugged hardwood handle and a premade internal pathway for fuel pump wires.

Nothing on the market today gives you as much tool space or as many drawers!

Kit is made from light weight plywood laser cut to exacting standards. Plenty of tabs assure easy alignment and enough glue surface never to fall apart unlike other less thought out field box kits. Ruggedly designed drawers have adequate clearance to slide smoothly even after application of paint or polyurethane. Many features never before available in any field box.

Specifications:
Length: 20.3"
Width: 7.25"
Height: 14.1"
Battery Compartment footprint: 6.75"x3.85"x4.2" high.
Fuel Container Area 4.35" deep x 6.75" wide.
Weight: Only 4.55lbs Empty. (Weight includes finish.)

Kit contains all wood, rubber feet, screws, hardwood handle. Aproximate assembly time 2-3 hours. Stain or paint to taste.

TEMPORARILY OUT OF STOCK, PRODUCTION PENDING 

Weight 180g/6.37oz.

Adaptable to replace clip packs from early JR and Futaba TX's.

Maintenance charge and maximum form charge rate for this pack is not to exceed 70mAh. See chart at top of category page for charging recommendations.

Form charge on factory wall charger only, not to exceed 70mAh. Attempting to form charge (initial charge) on peak detection charger or by any other method not specifically stated here is not recommended and voids warranty.

SEE OUR AA NiMH HERE:

https://www.radicalrc.com/item/FDKSanyo-1650mAh-AA-NiMH-9.6V-8-Cell-Square-TX-Pack-51 

When we started out to design a smaller, quick-to-build, and inexpensive kit, we found that we had the perfect starting point--our Javelin. Its great flying characteristics have made it one of our best-selling kits.

So, we found that by shrinking the original Javelin, simplifying the construction, and lightening parts where possible, what we ended up with is a fantastic flying model -- the Dart!

It's another in our Schoolyard series - a kit you can easily frame up in just a weekend, and once completed, enjoy at a local schoolyard or park.

All of this comes in a great looking design that is remarkably easy to build, thanks to our innovative design techniques and precision laser cut parts.

Although it only weighs just over a pound, ready-to-fly, the Dart's construction gives it surprising rigidity to handle most anything you can throw at it. Loops, rolls, inverted flight, snaps, spins, hammerheads, Cuban-8's, split-S, and more.

And after you're done tearing up the skies, throttle down to easily cruise around the field. Then when the time's right, setup for a nice, controlled landing.

Program in a transmitter flaperon mix, put the aileron servos into separate channels, and then enjoy even slower flights, shorter takeoffs, and slower landings!

Because of the interlocking design and high quality laser cutting of the parts, the Dart is a quick build. Not only does it build quick, but it also builds straight and true as all of the parts were designed to align properly with a minimum of fuss and alignment tools.

The wing is removable, giving access to inside the cabin area. From there, you have easy access to install most any brand of radio and control linkages.

Up-front, we've designed in a large hatch that covers the spacious battery compartment. This area will easily handle up to 1000mAh 2-3s packs.

Specifications:

• Wingspan: 30 inches
• Wing Area: 165 sq inches
• Length (airframe only): 24.5 inches
• Weight: 7-8 oz. framed; 17-20 oz. (rtf)
• Radio: 4 ch. (5 w/flaperons)
• Four 20+ in./oz. servos (Mini servos - similar to HS-5065MG)

Power:

• 100+ watt electric motor, 20+ amp ESC, 2-3s LiPo

Features of the Dart

• Perfect for Small Field Flying
• A low parts count and small size make this kit quick to build and easy to fly at schoolyards, ballfields, and parks.
• Premium USA Hardware
• Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
• Dual Ailerons
• Mounted underwing, these two pre-cut aileron hatches make it easy to install the aileron servos.

WEB-LOCK Construction

There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.

Main gear

Included are the pre-bent main gear legs.

Front Hatch

Held in with magnets, this extra large hatch gives you easy access to swap out the flight battery.

Included Motor Spacers

Included are additional spacers to help position your electric motor at just the right spot, regardless of brand.

Additional items needed to complete the Dart kit:

• Propeller o Motor mount & mounting hardware
• "Y" servo harness (for aileron if 4 channel) or two short servo extensions (if 5 channel w/flaperons)
• Pushrods (two 5" for ailerons, two 14" for elevator & rudder)
• Clevises for the pushrods
• Two 1.5" - 2" diameter main wheels
• Tailwheel
• Covering - 1 roll (more, depending on color scheme) 

LOOKING FOR A DEAL? All Futaba, JR-Hitec, Airtronics(old) connectors, male or female and two or three wire single end leads/pigtails are quantity of 5 for $8, regularly $2 each. Select your quantity option below.

This plug fits several transmitter battery packs with odd plugs. If your Futaba or Hitec TX pack has a white plug, this pigtail will fit. Be sure to triple check polarity when building a charge cord.

Notes from Dave: This and the other park flyer RX from Airtronics are both rated at 100 meters or 330 feet. In testing the 6 channel, I found the rating to conservative to the extreeme being able to maintain link nearly out of sight overhead. I have not tested this unit but the 6ch is certainly good over 1000 feet in the air. If your unsure if if your model needs a full range RX or not, we invite you to phone in and we'll give you our reccomendations. I'll post actual test results here when I've had a chance to fly one of these.

Specifications:
Frequency: 2.4ghz FHSS-1
Norminal Input Voltage: 4.8-6.0V
Range: Aprox 100m (330ft)
Dimensions: 0.94 x .072 x 0.23in (24 x 18.4 x 5.9mm)
Fail Safe Support: Yes (CH1 - CH4)

SKU Number: AIR92134

Capabilities:
Firmware Upgrade
Data Setting
Data Save & Load to PC
Data Reset
Auto Version Check
PC interface for Hitec 2.4GHz Telemetry Monitoring System (With optional Sensor Station & Sensors)

Current Applicable Models:
Receivers: Freedom 9, Optima 7 & 9
Transmitters: Optic 6 Sport, Aurora 9
Transmitter Module: Spectra 2.4 AFHSS Module
The HPP-22 requires an internet connection to download software and a USB Cable with mini-B connector for operation.

Web Address for sofware download is:
https://www.hitecrcd.com/tester/hpp_22.html