|
| |
New from Maxx Products. On/off Switch with Soft mount and built in charge jack.
We added a 3-LED on-board battery checker to our best-selling Soft Mount One-Piece Charge Switch. The three LEDs - green, yellow, & red - monitor the status of Rx pack under actual load. It is compatible with both 4.8V and 6V flight systems. Mounting cut-off area for this switch: 1.3" x 0.5"
SKU Number: MPI5470
|
|
|
|
|
| |
Heavy Duty Switch with Charge Jack and Indicator Light Futaba. Avoid leaving your tattle tale charge lead hanging out by using this switch with built in charge jack. Heavy duty switch inside so it is appropriate for any giant scale application. Also accepts JR/Hitec/Airtronics plug. Heavy duty 22 gauge wire. Ultimate in switching reliability and convenience. This switch is specially designed for the power supply of receiver, ignition, and electric model supply.
Current: 5A
Voltage: 18A
Life-span: 10,000 times
Weight: 22.5g
Size: 30cm
Important: Avoid harm to your receiver, set switch to the OFF position when charging.
SKU Number: RRCSWHDCJLGTFJ
|
|
|
|
|
| |
Heavy Duty Switch with Charge Jack and Indicator Light JR/Hitec/Airtronics. Avoid leaving your tattle tale charge lead hanging out by using this switch with built in charge jack. Heavy duty switch inside so it is appropriate for any giant scale application. Also accepts JR/Hitec/Airtronics plug. Heavy duty 22 gauge wire. Ultimate in switching reliability and convenience. This switch is specially designed for the power supply of receiver, ignition, and electric model supply. Current: 5A
Voltage: 18A
Life-span: 10,000 times
Weight: 22.5g
Size: 30cm
Important: Avoid harm to your receiver, set switch to the OFF position when charging.
SKU Number: RRCSWHDCJLGTJR
|
|
|
|
|
| |
Giant scale size switch. Soft mount and built in charge jack. Onboard battery checker for LiPo and LiFe battery packs. 3-LED on-board battery checker with three LEDs - green, yellow, & red - monitor the status of Rx pack under actual load. Switch has Deans input for battery and two universal outputs to carry plenty of current to your hungry servos.
SKU Number: MPI6272
|
|
|
|
|
| |
Giant scale size switch. Soft mount and built in charge jack. Onboard battery checker for LiPo and LiFe battery packs. 3-LED on-board battery checker with three LEDs - green, yellow, & red - monitor the status of Rx pack under actual load.
SKU Number: MPI6170
|
|
|
|
|
| |
Giant scale size switch. Soft mount and built in charge jack. Onboard battery checker for LiPo and LiFe battery packs. 3-LED on-board battery checker with three LEDs - green, yellow, & red - monitor the status of Rx pack under actual load.
SKU Number: MPI6470
|
|
|
|
|
| |
New from Maxx Products. On/off Switch with Soft mount and built in charge jack.
We added a 3-LED on-board battery checker to our best selling Soft Mount One-Piece Charge Switch. The three LEDs - green, yellow, & red - monitor the status of Rx pack under actual load. It is compatible with both 4.8V and 6V flight systems.
SKU Number: MPI5170
|
|
|
|
|
| |
Avoid leaving your tattle tale charge lead hanging out by using this switch with build in charge jack. Little tab opens and closes dust cover over charge receptacle. Shown open here. Heavy duty switch inside so it is appropriate for any giant scale application. Wire is 22 gauge and switch is double row knife. Ultimate in switching reliability and convenience.
SKU Number: RRCSWHDCJJR
|
|
|
|
|
| |
Avoid leaving your tattle tale charge lead hanging out by using this switch with built in charge jack. Little tab opens and closes dust cover over charge receptacle. Shown open here. Heavy duty switch inside so it is appropriate for any giant scale application. Wire is heavy duty 22 gauge and switch is double row knife. Ultimate in switching reliability and convenience.
JR photographed for example but this part number is Futaba and comes with Red/Black and white wires with correct plugs. Great in giant scale a/c. TEMPORARILY OUT OF STOCK
SKU Number: RRCSWHDCJFJ
|
|
|
|
|
| |
Avoid leaving your tattle tale charge lead hanging out by using this switch with built in charge jack. Little tab opens and closes dust cover over charge receptacle. Shown open here. Heavy duty switch inside so it is appropriate for any giant scale application. Wire is 22 gauge and switch is double row knife. Ultimate in switching reliability and convenience. Use in up to 1/4 scale.
SKU Number: RRCSWSTDCJJR
|
|
|
|
|
| |
Avoid leaving your tattle tale charge lead hanging out by using this switch with built in charge jack. Little tab opens and closes dust cover over charge receptacle. Shown open here. Heavy duty switch inside so it is appropriate for any giant scale application. Wire is 22 gauge and switch is double row knife. Ultimate in switching reliability and convenience. Use in up to 1/4 scale.
SKU Number: RRCSWSTDCJFJ
|
|
|
|
|
| |
Charge pigtail incorporated into removable flag type switch. When pin is inserted into switch, power is switched off. Pull pin and model comes on and stays on until pin is inserted in switch again. I generally don't favor the use of single contactor switches in high vibration enviroments. These have been used in those types of models for some time with good success however there is no redundancy in this type switch. These should only be used in low vibration models such as electrics and sailplanes. Highly visabillity red with "Remove Before Flying" logo on flag.
Order in pairs and get $1 off each, select option below.
SKU Number: RRCSWFLAG
|
|
|
|
|
| |
RRC Heavy Duty On/Off Switch Harness JR. Includes receptacle for charging jack plug. 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Excellent choise for heavy duty or large applications. Direct replacement fit for all helicopter applications. Vibration resistant.
SKU Number: RRCSWHDJR
|
|
|
|
|
| |
RRC Heavy Duty On/Off Switch Harness Futaba J. 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Excellent choice for heavy duty or large applications. Direct replacement fit for all helicopter applications. Vibration resistant.
SKU Number: RRCSWHDFJ
|
|
|
|
|
| |
ATX Style heavy duty switch harness without charge jack. 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Order in pairs for $1 off each, select option below.
SKU Number: RRCSWHDATX
|
|
|
|
|
| |
ATX Style standard switch harness. 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Order in pairs for $1 off each, select option below.
SKU Number: RRCSWSTDATX
|
|
|
|
|
| |
JR/Hitec/Airtronics Z(new) Style standard switch harness with charge pigtail. Heavy Duty 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Order in pairs for $1 off each, select option below. Unlike factory switches, ours are made with gold plated pins and heavy 22 gauge wire.
SKU Number: RRCSWHDCPJR
|
|
|
|
|
| |
Futaba J style standard switch harness with charge pigtail. Heavy Duty 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. Order in pairs for $1 off each, select option below. Unlike factory switches, ours are made with gold plated pins and heavy 22 gauge wire.
SKU Number: RRCSWHDCPFJ
|
|
|
|
|
| |
Fits the older G plugs. New switches for your antique gear. TEMPORARILY OUT OF STOCK
SKU Number: RRCSWSTDFG
|
|
|
|
|
| |
Futaba J Style standard switch harness. 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. This Surface switch does not have a charge pigtail like Aircraft switches do. Typically used in RC Cars/Trucks/Boats etc where RX battery easy to plug directly into for charging.
SKU Number: RRCSWSTDFJCAR
|
|
|
|
|
| |
Micro single row knife slide switch. On/off switch with plastic mounting receptacle and 26 gauge 3" pigtails and JR/Hitec/Universal connectors. Weight = 3g/0.11oz. No mounting screws.
SKU Number: RRCSWMLJR
|
|
|
|
|
| |
Micro single row knife slide switch. On/off switch with plastic mounting receptacle and 26 gauge 3" pigtails and Futaba connectors. Weight = 3g/0.11oz. No mounting screws.
SKU Number: RRCSWMLFJ
|
|
|
|
|
| |
Micro single row knife slide switch. On/off switch with plastic mounting receptacle and 26 gauge 3" pigtails and JR connectors. Weight = 3g/0.11oz. No mounting screws.
SKU Number: RRCSWMLJR
|
|
|
|
|
| |
JR/Hitec/Spektrum/Universal Style standard switch harness. 22 gauge leads, double row knife type switch. Must get dirty in 4 specific places before it can fail. This is the highest quality type switch. This Surface switch does not have a charge pigtail like Aircraft switches do. Typically used in RC Cars/Trucks/Boats etc where RX battery easy to plug directly into for charging.
SKU Number: RRCSWSTDJRCAR
|
|
|
|
|
| |
Redundant Double Row Knife Sliding Switch On/Off. Wire only, No Connectors. 22 gauge wire.
SKU Number: RRCHSWW
|
|
|
|
|
| |
Micro single row knife slide switch. On/off switch with plastic mounting receptacle and 22 gauge 3" pigtail. Weight: 2.2g/0.07oz. No mounting screws.
SKU Number: RRCSWMICRO
|
|
|
|
|
| |
Super tiny, "Grain of Wheat" switch & harness. 28 gauge leads, single row knife type switch. Very low amperage for switching onboard electronics on and off. Don't try to switch your motor with this or POOF! Weight 0.6g/0.02oz. Leads are 3 inches. No mounting screws.
SKU Number: RRCSWGW
|
|
|
|
|
| |
A digital switch and linear voltage regulator in one that simplifies wiring in your craft. Rated for 10 amps constant, 20 amps burst (Max 8 seconds). Perfect for use with 2S LIPO packs. Simple opperation, hold button 1 second to turn on, hold button 1 second to turn off. Low voltage warning beeps start when input voltage falls to 7V, increased warnings at 6.6v. Warning beeps and flash become rapid at 6V. So efficient, when off, it would take 886 days to consume 1000mah out of your pack. Specifications:
Regulated Voltage: 6.11v (less than fully charged 6V NiCad or NiMH pack which is about 7.5v)
Max Input Voltage: 9V
Current used at idle when on: 3.897mah
Current with alarm sounding: 21 mah
Current used when off: .047 mah (1/21276th of an amp!)
Cutout Dimensions: .663" (16.9mm) x 1.8" (45.7mm)
Weight: .701 oz. (19.8g)
SKU Number: RRCVREGSWF
|
|
|
|
|
| |
A digital switch and linear voltage regulator in one that simplifies wiring in your craft. Rated for 10 amps constant, 20 amps burst (Max 8 seconds). Perfect for use with 2S LIPO packs. Simple opperation, hold button 1 second to turn on, hold button 1 second to turn off. Low voltage warning beeps start when input voltage falls to 7V, increased warnings at 6.6v. Warning beeps and flash become rapid at 6V. So efficient, when off, it would take 886 days to consume 1000mah out of your pack. Specifications:
Regulated Voltage: 6.11v (less than fully charged 6V NiCad or NiMH pack which is about 7.5v)
Max Input Voltage: 9V
Current used at idle when on: 3.897mah
Current with alarm sounding: 21 mah
Current used when off: .047 mah (1/21276th of an amp!)
Cutout Dimensions: .663" (16.9mm) x 1.8" (45.7mm)
Weight: .701 oz. (19.8g)
SKU Number: RRCVREGSWJR
|
|
|
|
 "MPI Onboard Switch & Harness with 3-LED Voltage Monitor for JR/Spektrum/Universal")
 "Heavy Duty Switch with Charge Jack and Indicator Light Futaba")
 "Heavy Duty Switch with Charge Jack and Indicator Light JR/Hitec/Airtronics")
 "MPI Onboard Switch Harness Heavy Duty 3-LED Voltage Monitor for Futaba connectors")
 "MPI Onboard Switch Harness Heavy Duty 3-LED Voltage Monitor for JR/Spektrum/Universal")
 "MPI Onboard Switch & Harness with 3-LED Voltage Monitor Futaba J")
 "Heavy Duty Switch with Charge Jack JR/Hitec/Air New/Spketrum/Universal")
 "Heavy Duty Switch with Charge Jack Futaba")
 "Standard Duty Switch with Charge Jack JR/Spektrum/Universal")
 "Standard Duty Switch with Charge Jack Futaba")
 "Remove Flag Before Flight Switch Universal Plugs")
 "RRC Heavy Duty Switch Harness JR/Hitec/Spektrum/Universal")
 "RRC Heavy Duty Switch Harness Futaba J")
 "Heavy Duty Switch Harness Old Airtronics ON SALE!")
 "Switch Harness Airtronics X(old)")
 "Switch Harness JR/Hitec/Airtronics Z(new) w/Charge Pigtail")
 "Switch Harness Futaba J w/Charge Pigtail")
 "Futaba G (Old Style) Standard Size Switch Harness")
 "Switch Harness Futaba J Surface")
 "Micro On/Off Switch w/Micro Lite Harness & JR Connector")
 "Micro On/Off Switch w/Micro Lite Harness, Futaba J connector")
 "Micro On/Off Switch w/Micro Lite Harness, JR connector")
 "Switch Harness JR/Hitec/Spektrum/Universal Surface")
 "RC Receiver Switch with Wire Only")
 "Micro On/Off Switch Only")
 "Grain of Wheat, Tiny Sub Micro Switch & Leads")
 "RRC V-Reg Digital Switch Futaba Type Plugs")
 "RRC V-Reg Digital Switch JR/Hitec/Spektrum Type Plugs")