| Search Results for Keyword(s):servo wire (matching all words) | | Search found 178 matching products. | | | |
2 Wire battery female as found on the battery input lead of a switch harness or the end of a charge cord. This plug will accept the male connector on a stock RX battery pack. This item is a 26 gauge which is similar to what you find on many factory stock switch harnesses. I consider it light duty, use on charge cords or in smaller low servo count models. Twisted Wire.
SKU Number: RRC2PPFJR26GTIG
|
|
|
|
| | |
Slip over horn with adjustment wheel collar as shown in photo. This is a complete set of adjustable horns that slip over the wire. Your aileron pushrod connects to this part. Simplifies servo link hook-ups. Includes (2) 3-32 Dura-Collars, (2) Nylon Horn Connectors, and (2) 4-40 x 1/8 Slotted Screws. For .093 wire. (QTY/PKG: 2 ) Weight: 3 grams/set (1.5 grams/each).
SKU Number: DUB103
|
|
|
|
| | |
Celebrating Sig's Golden Anniversary, they are ecstatic to introduce the latest addition to their line of high quality Build It Yourself airplane kits: the 1/5 Scale J-3 Piper Cub.. They've put everything they've learned about model airplanes into this special kit: scale details, Sig laser cut parts, full size plans, a comprehensive instruction booklet.
All the features you've come to expect from Sig. Then they added a little something special. The new 1/5 Scale J-3 Piper Cub is so real, you may have a hard time separating it from the 1930's full size airplane. All of the details are included - a working side door and window, dummy engine cowls with "eyebrows", scale-like wire landing gear, a fully detailed instrument panel... even the realistic "bird's eye-view" window on top of the cabin. Add in a full decal sheet including Cub lightning bolts and you have a Cub standing far above the rest. Specifications:
Wingspan 84.5 in 2146 mm
Wing Area 947 sq in 61.1 sq dm
Weight 7 lb 3175 g
Length 55.25 in 1403 mm
Radio Required 4-Channel, 5 Servos Recommended Engines
.40 - .46 cu in (6.5 - 7.5 cu cm) 2-Stroke
.45 - .65 cu in (7.5 - 10.7 cu cm) 4-stroke Kit Features
90% laser cut parts for accuracy and ease of assembly
Windshield and engine cylinders
Quality SIG AAA balsa and plywood
A super tough scale-like tail wheel assembly
Full size plans
Molded plastic parts for windows
Fiberglass cowling
A full compliment of quality SIG hardware
Fully illustrated manual to guide you from box to completion Additional items required:
4 channel radio system with 5 standard servos
.40-.46 2 stroke or .45-.65 4 stroke glow engine
Propeller to fit engine
1 piece fuel tubing - SIGSH286
1 piece 12 ounce fuel tank - SUL429
2 pieces 3-3/8 inch main wheels - DUB338TC
1 piece 1 inch tail wheel - DUB100TW
4 rolls covering material
Optional DuBro Fuel Valve - DUB334 Tools Required:
Thin CA Adhesive
Medium CA Adhesive
Modeling knife with #11 blades
Drill with bits
Dremel Moto Tool with bits
Sanding Block
Sandpaper - Assorted Grits
T Pins Temporarily out of stock, pending manufacturer production
SKU Number: SIGRC82
|
|
|
|
| | |
This material shrinks easily with your covering shrink gun, lighter or other heat source. After shrinking, this higher quality tube stays flexible keeping your strain relief plans intact. Shrinks about 50%. 1/16 and 3/32 sizes are most popular for individual servo and park flier pack wires. 1/8" for strain relief on 2 pole 22 gauge battery pack wire, larger sizes for larger wire. Shown at right is 3/8" for locking together servo connectors you won't be able to easily inspect later.
Measurement is inside diameter: 1/4" / .25" / 6.4mm
Very economical to keep plenty of this material on hand. You'll find many uses, we even use the smallest size for wheel collars on some of our kits! Sold in multiples of 3' lengths.
SKU Number: WS06.4R
|
|
|
|
| | |
Available with Custom Connector Configuration. Product #: 010-0163-00 The Talon 60 is well suited for SMALL SCALE OR AEROBATIC HELIS ranging from 360-450 size requiring up to 1400 watts on 6S. This ESC offers Castle's industry-leading helicopter functions, such as the remarkable direct entry governor mode. Simply type in the desired RPM using a Castle Link USB adapter (redeemable coupon enclosed with purchase) and the free Castle Link Programming Suite running on a Windows (TM) PC. The compact layout and slim profile of the Talon 60 is also perfect for SCALE, SPORT and AEROBATIC PLANES in the .32 - .60 range requiring up to 1400 watts on 6S. Mounting the Talon 60 is simple and stress-free in any setup. The Talon series ESCs are known for sporting heavy-duty BEC's designed for today's servos. The Talon 60 is no exception. With its 20 AMP PEAK POWER and 8 AMPS OF CONTINUOUS POWER, it will keep even the most draining servos at ease. CASTLE-LINK(TM) For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is the ticket to creating the perfect setup. Gaining access to the host of tuning parameters, including free firmware updates and added feature sets, requires only the Castle Link USB adapter (redeemable coupon enclosed with purchase) and the free Castle Link software on your Windows (TM) PC. Users can then fine tune many variables to enhance their level of expertise. Power System Alerts The Talon ESCs are programmed to sound a number of tunes and codes using the motor as well as flashing LED patterns to alert users to certain conditions regarding their power system, such as over temperature, excessive load and locked head speed. Telemetry Capable Telemetry has the potential not only to improve the safety of our models by monitoring battery voltages, ESC temperature, and other critical parameters, but it also creates other opportunities to get even more fun out of flying because you've essentially reduced the risks of "unknown" inevitable crashes. Think of the benefits to be had from alarms that will sound to warn you when there's interference about or if your receiver battery is running unexpectedly low. Requires purchase of Castle Telemetry Link for S.BUS2 (Item # 010-0152-00) and compatible Futaba Radio or Castle Telemetry Link for X-BUS (Item# 010-0148-00) and a compatible Spektrum Radio. The TALON 60 is PROUDLY DESIGNED, MANUFACTURED AND SUPPORTED IN OLATHE, KANSAS, and is backed by Castle Creations' 1-year warranty and unparalleled 'make-it-right' customer support. Technical Specs Input Voltage Range: MIN: 2S LiPo MAX: 6S LiPo Max Continuous Amperage at full throttle: 60 amps* Max Voltage: 25.2V BEC Voltage: User selectable choice of 6 or 8 volt output (default is 6V). BEC Output: 20 amp peak** , 8 amp continuous Size: Width: 1.19" (30.2mm) Length: 2.56" (65mm) Depth: 0.41" (10.6mm) Weight : 2.05 oz. (57 g) with wires 1.09 oz. (g) without wires Connectors: N/A Items Needed for Operation: Battery and Motor connectors sold separately. Tools needed for installation: Soldering iron for attaching High Current bullet connectors to ESC, motor, and battery. (Deans Ultra Plugs, EC5 or Castle Polarized 4mm or 6.5mm) Application Guidelines: SMALL SCALE OR AEROBATIC HELIS ranging from 360-450 size requiring up to 1400 watts on 6S and SCALE, SPORT and AEROBATIC PLANES in the .32 -. 60 range requiring up to 1400 watts on 6S. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link adapter included in package) and freely downloadable Castle Link Windows software. (A small subset of the settings available through Castle Link Windows software can be accessed via manual programming through the transmitter stick.) Telemetry Link Capable: Yes Tech Notes: N/A TEMPORARILY OUT OF STOCK
SKU Number: CCTAL60
|
|
|
|
| | |
1/32 aircraft ply small laser horns. Mounting surface area on these are idealy suited to models with 3/32 to 1/4" thick control surfaces. These horns have holes correct for 1/32 wire used in all the smallest servos such as GWS Pico/Naro, HS-50, PS-20. HE490, HE2003, MX30 and many others. kits. Install horns in a slot in surface, because of the large contact area, they won't wobble like plastic pin type horns do. This results in finer better control and fewer trim changes in flight. 8 horns per package.
SKU Number: RRCLH32SM
|
|
|
|
| | |
Handy set of 8 black nylon keepers. Fits .055" (1.5mm) push rod wire most commonly used in park fliers and foamys. Black nylon material. Simply bend the end of your pushrod into an "L". Put the L through the servo or control horn. Bend the hand back and clip onto the rod. Simple use, removes and instals quickly. Keeps your push rods from slipping out of the control horns. Light weight, simple and they work great! Photo shows an example of our "Flexi-Keeper" hooked to end of push rod and a control horn. Control horn & wire are not included in set. TEMPORARILY OUT OF STOCK
SKU Number: RRCFLEXIKEEP055
|
|
|
|
| | |
This material shrinks easily with your covering shrink gun, lighter or other heat source. After shrinking, this higher quality tube stays flexible keeping your strain relief plans intact. Shrinks about 50%. 1/16 and 3/32 sizes are most popular for individual servo and park flier pack wires. 1/8" for strain relief on 2 pole 22 gauge battery pack wire, larger sizes for larger wire. Shown at right is 3/8" for locking together servo connectors you won't be able to easily inspect later.
Measurement is inside diameter. Sold in multiples of 2' lengths.
SKU Number: WS30B
|
|
|
|
| | |
26 gauge 2-pole battery quality wire. 30 strand wire. 2 conductor, fine strand and supple. Light duty battery wire perfect for lighting systems and smaller craft with few small servos such as DLG and hand launch sailplanes. Select desired length below, cut in bulk.
SKU Number: RRCW2B26RBFT
|
|
|
|
| | |
Tidy up and protect your servo wire. 3mm fits 1 servo cable. Works like Chinese finger cuffs, push ends toward center of piece to open up to insert wiring. Very nice for heli applications, keeps wires from straying and protects from friction damage. 3-foot packs available in Orange & Yellow. See other listings for color and size options. Limited supply available while supplies last...
SKU Number: RRCML03O
|
|
|
|
| | |
Stud of ball is 0-80 thread with black nut. Perfect fit for most glow throttle arms pefectly. Bolt to control hors and servo horns also. Brass fitting fits and solders onto .062 (1/16") steel wire or pushrod cable. Nylon ball link also included.
SKU Number: DUB190
|
|
|
|
| | |
Same parts as in our Stinger Tricopter kit. If you're building a custom Tri with 10mm square arms you can utilize the Radical RC parts of your choosing. Builds into one tiltable motor mount and servo holder that fits up to HS-81 size servos. Design intended for double ended ball link between servo arm and yaw motor mount. Pivot shaft and retainers included. Designed for bent wire or post landing gear options as used in our Stinger kits. No landing gear wire or ball links provided. Suggested ball link kit and threaded rod for 2-56 setup is DUB378 & DUB2135. For 2mm Setup use DUB693 & DUB2133.
SKU Number: RRCSTYMMK
|
|
|
|
| | |
This material shrinks easily with your covering shrink gun, lighter or other heat source. After shrinking, this higher quality tube stays flexible keeping your strain relief plans intact. Shrinks about 50%. 1/16 and 3/32 sizes are most popular for individual servo and park flier pack wires. 1/8" for strain relief on 2 pole 22 gauge battery pack wire, larger sizes for larger wire. Shown at right is 3/8" for locking together servo connectors you won't be able to easily inspect later.
Measurement is inside diameter.
Very economical to keep plenty of this material on hand. You'll find many uses, we even use the smallest size for wheel collars on some of our kits!
Hint:In a pinch? Short sections of tubing can be opened up 25% to 50% larger with hemostats or fine needle nose pliers. Sold in multiples of 3' lengths.
SKU Number: WS01R
|
|
|
|
| | |
6 inche extension includes ferrite toroid. Perfect between RX and throttle servo which is mounted up front near spark ignition system. Greatly reduces RF interference from ignition system that would otherwise wick down servo wire into your RX. Also useful for battery packs or any other items located close to ignition or any other source of unwanted RF.
SKU Number: RRCRFNSUP6FJ
|
|
|
|
| | |
A great handling sport biplane with many innovations. 167 Precision Laser Cut Parts.
Finally, a multi-wing model without 'N' struts or flying wires! Quick field assembly with quick snap on top and bottom wings. Special aileron transfer rods attach with magnetic snap as well. You will be prepped for flight before your buddies turn in their first wing bolt! Build as a Lazy Sunday flier or a sport monster with your brushless system. Includes machine guns and spoke wheel covers for those wanting a custom stand-off WWI look. Easy to fly in space challenged areas like ball fields and local parks. Fast enough to keep up with the big boys at the local club field and slow enough to land like an everyday trainer. Rugged design. Included landing gear means tall grass and runway touch-n-goes are a snap. Get your scarf and goggles on! The mission briefing is just a short build away! Specifications:
Finished weight: 8-9.5 oz.
Wing span: 23"
Wing area: 243 in. sq.
Length: 18.5" Radio: 3 or 4 channels Build as 3 or 4 channels, recommend 2-4 servos .2oz or less (Pico, DYS0202, Hitec HS50 or Heco 490/540), Berg Microstamp or GWS Pico RX (sub 10g), S-300 direct drive or equivalent 20mm brushless in or out runner. Castle Pixie 20 for S-300 motor, any high discharge pack from 600 to 1200 mah. International shipping note: box size is 24 inches long and approximately 16oz. weight. If you select a receiver (RX), tell us which channel you need at checkout. Although I think of this model as an outdoor ship, here is a video of one flying in a sports complex.
SKU Number: RRCDASMINIBIPE
|
|
|
|
| | |
Handy set of 8 black nylon keepers. Fits 1/32" push rod wire most commonly used in park fliers and foamys. Black nylon material. Simply bend the end of your pushrod into an "L". Put the L through the servo or control horn. Bend the hand back and clip onto the rod. Simple use, removes and instals quickly. Keeps your push rods from slipping out of the control horns. Light weight, simple and they work great! Photo shows "Flexi-Keeper" hooked to end of push rod and a control horn. Control horn & wire are not included in set.
SKU Number: RRCFLEXIKEEP132
|
|
|
|
| | |
This material shrinks easily with your covering shrink gun, lighter or other heat source. After shrinking, this higher quality tube stays flexible keeping your strain relief plans intact. Shrinks about 50%. 1/16 and 3/32 sizes are most popular for individual servo and park flier pack wires. 1/8" for strain relief on 2 pole 22 gauge battery pack wire, larger sizes for larger wire. Shown at right is 3/8" for locking together servo connectors you won't be able to easily inspect later.
Measurement is inside diameter.
Very economical to keep plenty of this material on hand. You'll find many uses, we even use the smallest size for wheel collars on some of our kits!
Hint:In a pinch? Short sections of tubing can be opened up 25% to 50% larger with hemostats or fine needle nose pliers. Sold in multiples of 3' lengths.
SKU Number: WS01.6B
|
|
|
|
| | |
Custom Extension as listed above except Female to Female plug. Used for some power box and other misc uses. This custom extension will have 2 ends that look just like an RX or Y harness arm. Accepts your servo ends. Micro Lite: This type of wire is used most commonly in applications with small servos (.5 oz weight or less usually) in park flyers, foamies, sailplanes, DLG's and other models with low servo loads. You can save a bunch of weight eliminating beefy stock wiring from these smaller models. 26 Gauge Standard: This wire is what you find in most new radio sets and on most mid size to full size standard torque 4 screw mountable servos. This ribbon wire size is a good wire choice for those types of servos (and smaller) if the runs are 24" or less. Good for smaller servos in long runs such as sailplane wings and similar. For example, great for you 60" cub but use 2o gauge your outfitting a 100" Cub. 22 Gauge Heavy Duty: Use for all larger models and any place a high torque or digital servo might be used. Use for standard torque servos if your runs are very long (over 24")
SKU Number: RRCCUSTOMEXTFF
|
|
|
|
| | |
The Nifty Plug & Socket Keeper is a great little item that will avoid the accidental disconnection of the servo cable plug and sockets within the model. They are simple to attach to the plug and socket units. The Keepers are attached to the female sockets. The tang that extends over the plug has two teeth that go behind the rear of the plug and straddle the center wire. They will prevent vibration from separating the plug and socket, however, they will separate in the event of a crash. This separation avoids additional damage to the plug and socket cables. The Keepers are brightly colored for safety and small enough to pass through wing tubes etc.
10 safety clips per package.
SKU Number: SOT265
|
|
|
|
| | |
SportBEC is the higher capacity version of our best-selling ParkBEC product. SportBEC powers your receiver and servos much more efficiently than a standard BEC. As many as 8 servos can be powered without worrying about an overheating BEC. SportBEC works great up to very high voltages, and is especially suited for "sport" aircraft and glow conversions. SportBEC is usually a necessity at 4s and above when running high torque or digital servos. SportBEC's output is selectable between 5V/6V using a small slide switch. The 6V setting gives more speed and torque to the servos, and is especially useful for helicopter flyers. A red LED indicates when 6V is selected. Many people don't realize that their ESC's BEC rating is misleading. With the linear BEC built into most speed controls, the current rating decreases as pack voltage increases. For example, several popular 25A ESCs with "3A" BECs are only capable of supplying 0.5A when running from a 3s pack. Because it is an efficient switching regulator, SportBEC can supply its full rated current of 3.5A all the way up to 8s. Many design hours were spent on SportBEC to ensure it does not create radio interference. It uses a shielded inductor and optimized layout, so you can use it without fear of glitching. SportBEC installs between your ESC and receiver, so you don't have to modify your speed control to disable its internal BEC. For best results, ensure that the SportBEC is installed at least 2 inches away from your receiver and antenna. Additional notes If you are using small servos make sure they can run at 6v. Some sub-micros, notably the Hitec HS-50 and Futaba S3154, can be damaged by a 6v supply. Specifications: Model: SportBEC
Specifications: Input voltage: 9V to 33.6v (3s-8s lithium, up to 21 NiMHs)
Output current: 3.5A (~8 standard servos, 4-6 digital)
Weight: 13g/.46oz (including wires)
SKU Number: DESportBEC
|
|
|
|
| | |
Y harness. 10 to 12" long. Use to run two servos off one channel output on RX. Futaba connector style, 22 gauge heavy duty 60 strand wire, gold connector pins as always.
SKU Number: RRCY12HDFJ
|
|
|
|
| | |
Sub-micro servo. Dimensions 0.76 x 0.32 x 0.76 in./(19.2 x 8.2 x 19.3 mm)
Weight w/Wire 4.5 g/0.16 oz.
Torque4.8V 6.94 oz.in. / 0.5 kg.cm.
Transit Time (4.8V) 0.11 sec./60?.
Comes with universal connector. LAST ONE LEFT!
SKU Number: HES988
|
|
|
|
| | |
We can hand make extensions and adapters to almost any specification. Choose from drop down menus your preferences. Generally we size these by measuring from the back of each connector. So the overall length will be greater by connector shell length. Twisted wire can be adjusted slightly in length by changing the number of twists. We try to get within about 1/2" of your spec. Please order long enough to compensate for minor variance. Note: 3,6,12,18,24,36, & 40" (3,6,10" Micro Lite) are stock machine made sizes and are lower cost, find them in the connector category to fit your specific brand. Check there first to see if any stock sizes will meet your needs. Micro Lite: This type of wire is used most commonly in applications with small servos (.5 oz weight or less usually) in park flyers, foamies, sailplanes, DLG's and other models with low servo loads. You can save a bunch of weight eliminting beefy stock wiring from these smaller models. 26 Gauge Standard: This wire is what you find in most new radio sets and on most mid size to full size standard torque 4 screw mountable servos. This ribbon wire size is a good wire choice for those types of servos (and smaller) if the runs are 24" or less. Good for smaller servos in long runs such as sailplane wings and similar. For example, great for your 60" Cub but use 22 gauge if your outfitting a larger Model. 22 Gauge Heavy Duty: Use for all larger models and anyplace a high torque or digital servo might be used. Use for standard torque servos if your runs are very long (over 24")
SKU Number: RRCCUSTOMEXT
|
|
|
|
| | |
DELight Ultra Bright LEDs pair. Powerful, easy to use LED lights which are designed to be used with the DELight Controller. Fully self-contained, can be used by themselves if desired. Standard servo-type plug, so you can use off-the-shelf servo extensions and Y-harnesses.
Each LED puts ot 15 lumens of light, which is more than a child's night-light. They have a wide 120 degree beam angle, so they can be seen from many positions and light up large surfaces.
Each module consists of a half-watt surface mount LED, an appropriate current-limit resistor and a 24" lightweight wire pigtail terminating in a universal servo-type connector. Available colors are currently red, green and white.
Product Specs:
Operating voltage: 4V-6V
Current: 150mA max
Size: .2" x .375" x .125" + 24" Wire Pigtail
Weight: 2.8 g
Applications:
Additional LEDs for the DELight Programmable Lighting System
Model Lighting
Theatrical Light Effects
Night Flying
SKU Number: DELIGHTLEDW
|
|
|
|
| | |
The SW-0250MG is a waterproof, high torque, digital mini servo that performs! An excellent replacement for the standard servo found in Traxxas 1/16 scale vehicles.
Features: - Strong metal gear train for added durability.
- Waterproof case design.
- Ideal for cars and boats subject to water or snow.
- Ideal for Traxxas 1/16 vehicles.
Specifications: - Torque @4.8v - 3.5kg/48.6oz-in
- Torque @6v -5.0kg/69.4oz-in
- Speed @4.8v - 0.14 sec/60 deg
- Speed @6v - 0.11 sec/60 deg
- Dimensions L x W x H (mm): 29.5 x 14.0 x 32.5
- Weight: 25.0g
- Operating Temperature: 14° - 122°F (-10° - 50°C)
- Running Current (no load): 80mA @4.8V, 100mA @6.0V
- Stall Current (at locked): 1000mA @4.8V, 1250mA @6.0V
- Idle Current: 5mA @4.8V, 5mA @6.0V
- Wire Length: 200 +- 5mm
- Output Gear Spline: 25 Tooth
- Bearings: 1BB
- Operating Travel: 100° (1000 -> 2000 μ second)
- Neutral Position: 1500 μ second
- Pulse Width Range: 800 -> 2200 u second
- Maximum Travel: Appx 130° (900 -> 2100 μ second)
- Refresh Rate: 240 Hz
- Motor Type: Brushed
SOLD OUT, See SAVSW-0250MGP for replacement
SKU Number: SAVSW-0250MG
|
|
|
|
|
 "Single End 2 Wire Battery Female 26 Gauge Twisted JR/Hitec/Airtronics Z(new) Style")
 "Du-Bro Strip Aileron Torque Rod Horn Set Only")
 "Sig Anniversary Piper J3 Cub 1/5 Scale Kit")
 "1/4\"/6.4mm Flexible Shrink Tubing for Wires, 3-Foot PC RED")
 "Castle Creations Talon 60")
 "Small Laser Control Horns for 1/32 wire")
 "Radical RC Flexi-Keepers .055\" (1.5mm) Wire L Bends 8 Pack")
 "1-3/16\"/30mm Flexible Shrink Tubing for Wires, 1-Foot Pc Black")
 "2-Pole Red/Black Battery Wire 26GA")
 "Mesh Looming Wire Guard 3mm Orange")
 "Du-Bro 1/16\" Brass Coupler to 2-56 threaded Ball Link and Ball Stud")
 "Stinger Tri-Copter Yaw Motor Mount Kit")
 "3/64\"/1.0mm Flexible Shrink Tubing for Wires, 3-Foot Pc RED")
 "RF Noise Suppression Extension Futaba J")
 "Radical RC Das Mini Bipe")
 "Radical RC Flexi-Keepers .032\" Wire L Bends 8 Pack")
 "1/16\"/1.6mm Flexible Shrink Tubing for Wires, 3-Foot Pc BLACK")
 "Sonic-Tronics Plug & Socket Safety Keepers 10 Pack")
 "Dimension Engineering Sport BEC")
 "Servo Y Harness Futaba")
 "HES-988 Sub Micro Servo 50% OFF SALE - Till It's Gone! Was $20, LAST ONE LEFT!")
 "Dimension Engineering DELight Ultra Bright LED White")
 "Savox SW-0250MG Waterproof, High Torque, Digital Mini Servo")
