This is a true scale model that happens to be a perfect park flyer. The Husky is a Float and Bush Plane Pilot's dream. Build as Float or Tundra Tire version. Float kit included (no tires included, float mount wire is used for the tires).
The kit is designed using CAD-technology and the parts are Laser cut for a perfect fit. It is a self jigging design using balsa and plywood which makes it both easy to build and repair. Most parts are interlocking like a jigsaw puzzle. Vacuum formed windshield, cowling and spinner are included. Decals are also included.
This model is recommended to the average builder/pilot with experience from a couple of models before. The kit takes about 20 hours to complete. Note, there are over 350 "LASER" cut parts in this kit. This kit represents a "Peak" in laser technology never before attained. If you just want a model that looks real or you want a precision scale replica, this Husky is for you!
Video by: Scott Mosher St. Paul, Minnesota
Video by: RCGroups "airtimeallen" from Rainier, WA.
Flying qualities are excellent, like the full sized Husky you'll be making coordinated turns. The kit is designed with ailerons but it flies just fine with rudder.
Specifications: Scale: 1:11 Span: 38.25 inches Area: 200 Sq.inches Weight: 10 ounces Motor: GWS IPS-S1 motor system or small brushless outrunner. 14 to 30 watts input power. Battery: 2 x 340-800mAh LiPo R/C: Aileron, Elevator, Rudder, Throttle Special Introductory Offer: Float Kit Included.
The Snotliner was originally designed for an indoor race that required a GWS IPS A drive. The kit has parts for several power options, the favorite being a 12mm direct drive brushless motor. A brushed IPS motor with a GWS 3x3 prop supplies plenty of power. Brushless 12mm Medusa & 2S-340 lipos will supply out of sight vertical. It will handle up to a 25mm motor for pilots with a need to go way too fast!
The kit is designed using CAD-technology and the parts are Laser cut for a perfect fit. It is a self jigging design using balsa and plywood which makes it both easy to build and repair. Most parts are interlocking like a jigsaw puzzle.
This model is recommended to the average builder/pilot with moderate experience from a couple of models before. Simple construction produces a light but rugged speedster. Model flies well at low speeds and will fit well into larger indoor environments like golf domes although it was designed primarily as a racer.
Motor choices below are GWS 50XC brushed, use 2S lipo and 3-3 or 4x2.5 prop. If you choose the Medusa 5300kv version then use it 2S Lipo with a 3-2 prop only.
Specifications: Span: 22 inches Weight: 3.5-5.5 ounces Motor: 12mm direct drive or small brushless "outrunner". Battery: 2S x 340-800mAh LiPo R/C: Aileron, Elevator,Throttle Note, Fox Lite 12mm motor mount included!