|
| |
2 oz Tank Measurements: 1 5/16 H x 1 13/16 W x 2 3/4 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with clunk line, clunk, brass tubes and stopper, cap and fastener.
SKU Number: DUB402
|
|
|
|
|
| |
4 oz tank measurements: 1 1/2 H x 2 1/16 W x 3 3/4 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with clunk line, clunk, brass tubes and stopper, cap and fastener.
SKU Number: DUB404
|
|
|
|
|
| |
6 oz tank measurements: 1 7/8 H x 2 3/16 W x 3 7/8 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with clunk line, clunk, brass tubes and stopper, cap and fastener. TEMPORARILY OUT OF STOCK
SKU Number: DUB406
|
|
|
|
|
| |
High Capacity Fuel Filler Valve Filling fuel tanks in RC models has never been easier until now! This new aluminum alloy fuel filler valve is perfect for large or giant scale aircraft. The fuel filler valve comes with stainless steel twist ties clamp wires and mounting plates with screws. Fill or De-Fuel Tanks Safely - Without disconnecting any fuel lines Pull To Open - Push To Close - Prevents engine flooding while refueling Safe for All Types of Fuels - Gasoline, Glow Fuel, or Smoke Oil Easy Mounting and Installation - Mounts flush against model's fuselage Works with 5/32" Fuel Tubing - No extra connections or tools needed Connect the new fuel supply tube to the fill nipple in the center of the red aluminum plunger. Gently pull the plunger outward until it stops. Once the filler valve is fully opened, you can now safely and easily begin to fuel or de-fuel the tank. The fuel line to the carburetor is automatically shut off from the new fuel source when the plunger is pulled out. This prevents the engine from flooding while refueling. When the fuel tank is full, simply remove the filling tube from the fill nipple and push the red plunger inward until it is closes inside the valve body. With the top of the plunger now flush with the fuselage, your model is now ready for action. It's that easy!
SKU Number: SUL751
|
|
|
|
|
| |
Sullivan is the world's leader in the number of the shapes, sizes and styles of its fuel tanks. From the smallest 1 ounce (30 ml) tank to the extra large 32 ounce (960 ml) tank, there is a Sullivan tank to fit almost any model. All tank kits include the hardware needed for glow fuel operation, including twist-tie clamps and both brass and nylon tubing. Sullivan molds fuel tanks from two materials: Flextanks are molded from a special flexible, translucent polymer blend making them easier to fit into tight places and are very durable. They can be reshaped with a heat gun if desired. Flextanks are for glow fuel only. DIMENSION: 1-7/8" (48 mm) High x 2-1/4" (57 mm) Wide x 4-1/2" (114 mm) Long TEMPORARILY OUT OF STOCK
SKU Number: SUL739
|
|
|
|
|
| |
8 oz tank measurements: 1 15/16 H x 2 5/16 W x 4 7/8 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with clunk line, clunk, brass tubes and stopper, cap and fastener.
SKU Number: DUB408
|
|
|
|
|
| |
10 oz tank measurements: 2 1/4 H x 2 9/16 W x 4 7/8 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.
SKU Number: DUB410
|
|
|
|
|
| |
12 oz tank measurements: 2 1/4 H x 2 9/16 W x 5 3/8 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.
SKU Number: DUB412
|
|
|
|
|
| |
14 oz tank measurements: 2 3/8 H x 2 11/16 W x 5 3/8 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.
SKU Number: DUB414
|
|
|
|
|
| |
16 oz tank measurements: 2 3/8 H x 2 11/16 W x 5 7/8 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.
SKU Number: DUB416
|
|
|
|
|
| |
20 oz tank measurements: 2 1/2 H x 3 1/16 W x 7 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.
SKU Number: DUB420
|
|
|
|
|
| |
24 oz tank measurements: 2 1/2 H x 3 1/16 W x 7 1/2 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.
SKU Number: DUB424
|
|
|
|
|
| |
32 oz tank measurements: 3 H x 3 11/16 W x 7 3/4 Long. Comes with stoppers for both Gas and Glow fuel use. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.
SKU Number: DUB690
|
|
|
|
|
| |
40 oz tank measurements: 3 1/4 H x 4 W x 8 Long. Comes with stoppers for both Gas and Glow fuel use. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.
SKU Number: DUB691
|
|
|
|
|
| |
Sullivan is the world's leader in the number of the shapes, sizes and styles of its fuel tanks. From the smallest 1 ounce (30 ml) tank to the extra large 32 ounce (960 ml) tank, there is a Sullivan tank to fit almost any model. All tank kits include the hardware needed for glow fuel operation, including twist-tie clamps and both brass and nylon tubing. Sullivan molds fuel tanks from two materials:Standard Tanks are molded from a rigid high density polyethylene blend. With the S484 or S489 Gasoline Conversion Kit, they may be used with gasoline or diesel fuel. Size: 1-1/4" (32 mm) high, 1-1/4" (32 mm) wide & 2-1/8" (54 mm) long.
SKU Number: SUL400
|
|
|
|
|
| |
Sullivan is the world's leader in the number of the shapes, sizes and styles of its fuel tanks. From the smallest 1 ounce (30 ml) tank to the extra large 32 ounce (960 ml) tank, there is a Sullivan tank to fit almost any model. All tank kits include the hardware needed for glow fuel operation, including twist-tie clamps and both brass and nylon tubing. Sullivan molds fuel tanks from two materials: Standard Tanks are molded from a rigid high density polyethylene blend. With the S484 or S489 Gasoline Conversion Kit, they may be used with gasoline or diesel fuel. Round tank for 1/2A or header tank use. 1 ounce capacity, complete hardware package included. Size: 1-3/8" (32 mm) high x 1-3/8"(32 mm) wide x 2-3/4"(54 mm) long.
SKU Number: SUL401
|
|
|
|
|
| |
Flextanks are molded from a special flexible, translucent polymer blend making them easier to fit into tight places and are very durable. They can be reshaped with a heat gun if desired. Flextanks are for glow fuel only. Stopper included is for glow fuel. Complete with all hardware and tubing required for tank. Generic photo from manufacturer to show general tank form. Height: 1-1/4" (32 mm). Width: 1-3/4" (44 mm). Length: 2-3/4" (70 mm).
SKU Number: SUL736
|
|
|
|
|
| |
Tank compatible with all model fuels and smoke oils. Stopper included is for glow fuel only. Complete with all hardware and tubing required for tank. Generic photo from manufacturer to show general tank form. Height: 1-1/4" (32 mm). Width: 1-3/4" (44 mm). Length: 2-3/4" (70 mm).
SKU Number: SUL436
|
|
|
|
|
| |
Tank compatible with all model fuels and smoke oils. Stopper included is for glow fuel only. Complete with all hardware and tubing required for tank. Generic photo from manufacturer to show general tank form. Height: 1-3/8" (35 mm), Width: 2" (51 mm), Length: 3-1/2" (89 mm).
SKU Number: SUL437
|
|
|
|
|
| |
Tank compatible with glow fuel only. Complete with all hardware and tubing required for tank. General photo from manufacturer to show general tank form. Height: 1-3/4" (44 mm). Width: 2-1/8" (54 mm). Length: 4" (102 mm). TEMPORARILY OUT OF STOCK
SKU Number: SUL738
|
|
|
|
|
| |
Tank compatible with all model fuels and smoke oils. Stopper included is for glow fuel only. Complete with all hardware and tubing required for tank. Generic photo from manufacturer to show general tank form. Height: 1-3/4" (44 mm), Width: 2 1/8" (54 mm), Length: 4" (102 mm). TEMPORARILY OUT OF STOCK, COMING SOON
SKU Number: SUL438
|
|
|
|
|
| |
Tank compatible with all model fuels and smoke oils. Stopper included is for glow fuel only. Complete with all hardware and tubing required for tank. Generic photo from manufacturer to show general tank form. Height: 2-1/8" (54 mm). Width: 2-1/2" (63.5 mm). Length: 4-3/8" (111.13 mm) . This Is 10oz Slant Type Flextank for Glow Fuel Operation from Sullivan. FEATURES
Molded from a special flexible, translucent polymer making it easier to fit into tight places.
Very durable!
Easy to install and remove because it can be squeezed.
This tank kit includes all the hardware needed for glow fuel operation, including twist-tie clamps, brass and nylon tubing, heavy duty nylon caps, kunk, and rubber plug.
Can be reshaped with a heat gun if desired.
For glow fuel only!
INCLUDES
One 10oz Slant Type Flextank
SPECIFICATIONS
Capacity: 10oz (300ml)
Height: 2-1/8" (54mm)
Width: 2-1/2" (64mm)
Length: 4-3/8" (111mm)
Formerly SUL440 (discontinued)
SKU Number: SUL740
|
|
|
|
|
| |
Tank compatible with all model fuels and smoke oils. Stopper included is for glow fuel only. Complete with all hardware and tubing required for tank. Generic photo from manufacturer to show general tank form. Height: 2-1/8" (54 mm). Width: 2-1/2" (63.5 mm). Length: 5" (127 mm). CURRENTLY OUT OF PRODUCTION BY MANUFACTURER
SKU Number: SUL441
|
|
|
|
|
| |
May fit other tanks, Du-Bro part. Be sure to order some Neoprene fuel line (DUB225) to use as a clunk line.
SKU Number: DUB400
|
|
|
|
|
| |
Replace a lost, damaged or rotted fuel tank stopper. For glow fuel only. For all Du-Bro tanks, likely compatible with others. Size: OD Neck .650 (16.51mm), OD Top .750" (19mm), Height .410" (10.4mm)
SKU Number: DUB401
|
|
|
|
 "Du-Bro 2 ounce Fuel Tank")
 "Du-Bro 4 ounce Fuel Tank")
 "Du-Bro 6 ounce Fuel Tank")
 "Sullivan Heavy Duty High Capacity Fuel Filler Valve New Aluminum Alloy Design")
 "Sullivan 8 ounce Slanted Flex Tank")
 "Du-Bro 8 ounce Fuel Tank")
 "Du-Bro 10 ounce Fuel Tank")
 "Du-bro 12 ounce Fuel Tank")
 "Du-Bro 14 ounce Fuel Tank")
 "Du-Bro 16 ounce Fuel Tank")
 "Du-Bro 20 ounce Fuel Tank")
 "Du-Bro 24 ounce Fuel Tank")
 "Du-Bro 32 ounce Fuel Tank")
 "Du-Bro 40 ounce Fuel Tank")
 "Sullivan R-1 Round 1 Ounce Tank")
 "Sullivan R-2 Round 2 Ounce Tank")
 "Sullivan 2 ounce Slanted Glow Flex Tank")
 "Sullivan 2 ounce Slanted Glow Tank")
 "Sullivan 4 ounce Slanted Glow Tank")
 "Sullivan 6 Ounce Slanted Glow Flex Tank")
 "Sullivan 6 ounce Slanted Glow Tank")
 "Sullivan 10 ounce Slanted Glow Flex Tank")
 "Sullivan 12 ounce Slanted Glow Tank")
 "Gas Stopper Conversion for Du-Bro Tanks")
 "Du-Bro Replacement Glow Stopper")
