|
|
|
- Whats New >
- E-Power Everything >
- Speed Controls Brushless >
GWS & Other Brushless Controls
|
| | | | |
Brushless 5A Micro ESC, Speed Control for Micro Outrunner Brushless Motors. Model HESC - 5A
Conn. Current 5A
Burst Current (>10s) 7A
BEC Mode Linear
BEC Output 5V / 0.8A
Battery cell Li-ion, Li-Poly 2 ~ 3 cell
NiMH, NiCd 5 ~ 9 cell
Balance Discharege Protection N/A
Weight 4.5g
Size (L x W x H) 24 x 12 x 6 SOLD OUT, FACTORY BACKORDER, NO ETA
SKU Number: HESC5A
|
|
|
|
| | |
GWS's new brushless control is programmable. Out of the package they are set to auto detect Lithium cell count and with brake feature on. With the addition of the inexpensive GWPGM001 programmer, you can set NiCad/NiMH/Lipo detection modes, no brake-light brake-medium brake-strong brake, Throttle delay, switching frequency and level of timing advance (Auto/5/12/18/25 degrees). A lot of nice features for a low cost control. Peak Current: 35 Amp.
Weight: 22g (0.78oz)
Ni-Cd or NiMh Battery: 6-12cells
Lipo Battery: 2-4 cells or 2-4 A123 Lithium Iron cells
Built-in Battery Eliminator Circuit 3 Amps GWS Products warranty info.
SKU Number: GWESC35A
|
|
|
|
| | |
GWS's new brushless control is programmable. Out of the package they are set to auto detect Lithium cell count and with brake feature on. With the addition of the inexpensive GWPGM001 programmer, you can set NiCad/NiMH/Lipo detection modes, no brake-light brake-medium brake-strong brake, Throttle delay, switching frequency and level of timing advance (Auto/5/12/18/25 degrees). A lot of nice features for a low cost control. GWESC45A Performance Data:
Max Amps:45A
Weight: 32 grams
Internal Resistance: 2.33mOhms
BEC:4A/5.0V
Ni-Cd or NiMh Battery: 6-12cells
Lipo Battery: 2-4 cells or 2-4 A123 Lithium Iron cells
Size: 75x30x9mm (2.95x1.18x0.35") GWS Products warranty info.
SKU Number: GWESC45A
|
|
|
|
| | |
Weight:25g (0.89oz)
63mmx38.1mmx12mm
Flyers can carry this small & compact programming board to the flying fields and change the setting on the GWS Brushless Speed Controllers without a PC. The functions flyers can change are as below:
1. Battery Cutoff Voltage: Ni-MH 6~16 Cells/Li-PO 2~4 Cells.
2. Brake Setting: No Brake/Soft Brake/Moderate Brake/Hard Brake.
3. Responding Delay Time to Throttle: 0.15/0.3/0.7/1.0 Sec.
4. Switching Frequency: 8 KHz/16 KHz/32 KHz/none. 5. Timing Advance: auto/5 degree/12 degree/18 degree/25 degree. GWS Products warranty info.
SKU Number: GWPGM001
|
|
|
|
| |
 "5A Micro Brushless ESC")
 "GWS BRUSHLESS ESC 35A - Lipo/A123")
 "GWS BRUSHLESS ESC 45A - Lipo/A123")
 "GWS Brushless ESC Programming Card")