The Snotliner was originally designed for an indoor race that required a GWS IPS A drive. The kit has parts for several power options, the favorite being a 12mm direct drive brushless motor. A brushed IPS motor with a GWS 3x3 prop supplies plenty of power. Brushless 12mm Medusa & 2S-340 lipos will supply out of sight vertical. It will handle up to a 25mm motor for pilots with a need to go way too fast!
The kit is designed using CAD-technology and the parts are Laser cut for a perfect fit. It is a self jigging design using balsa and plywood which makes it both easy to build and repair. Most parts are interlocking like a jigsaw puzzle.
This model is recommended to the average builder/pilot with moderate experience from a couple of models before. Simple construction produces a light but rugged speedster. Model flies well at low speeds and will fit well into larger indoor environments like golf domes although it was designed primarily as a racer.
Motor choices below are GWS 50XC brushed, use 2S lipo and 3-3 or 4x2.5 prop. If you choose the Medusa 5300kv version then use it 2S Lipo with a 3-2 prop only.
Specifications: Span: 22 inches Weight: 3.5-5.5 ounces Motor: 12mm direct drive or small brushless "outrunner". Battery: 2S x 340-800mAh LiPo R/C: Aileron, Elevator,Throttle Note, Fox Lite 12mm motor mount included!
 "Fox Lite SnotLiner")
