Great field box for the pilot that is tired of carryinig too much weight around. Holds all the essential tools and equipment. Fits gel cells up to 10 amps, predrilled and cut for popular power panels. Strorage space for your favorite starter and 1/2 gallon fuel container. Not many people have ever used more than a 1/2 gallon of glow fuel in a day yet so many of us carry a full gallon back and forth.
Features 4 drawers, assortment of dividers for the thinner drawers. Built in transmitter rack and glow plug caddy. Power panel opens up to access additional storage space. Loop-Key cutouts for retaining your fuel bottle with rubber bands or Vecro strip. False floor lifts out easily for service and replacement of your 12v battery. Has a rugged hardwood handle and a premade internal pathway for fuel pump wires.
Maybe you've noticed the many clunky field box's with only one drawer to pile all your tools and spares into. Anyway you slice it, you purchase a field box to organize your field experience, not junk it up. Our Mini Glow Field Tote gives you 4 generous drawers, box top storage and under field panel storage. Enough locations to divide your goodies up making them easy to find when needed.
Kit is made from light weight plywood laser cut to exacting standards. Plenty of tabs assure easy alignment and enough glue surface never to fall apart unlike other less thought out field box kits. Ruggedly designed drawers have adequate clearance to slide smoothly even after application of paint or polyurethane. Many features never before available in any field box.
Specifications: Length: 14.5" Width: 7" Height: 14.1" Battery Compartment footprint: 6.5"x3.85"x4.2" high. Fuel Container Area 4 3/18" deep x 6 1/2" wide. Empty Weight: Only 4.25lbs. (Weight after finish applied.)
Kit contains all wood, rubber feet, screws, hardwood handle and fuel jug. Aproximate assembly time 1-2 hours. Stain or paint to taste.
Great cord to get you out of trouble. Pump a charge in that glow ignighter and finish the day's flying. Many of today's fast chargers also charge single cells. Cord is about 24 inches long. Bananas on one end, glow plug tip (to fit your igniter) on the other. SKU Number: RRCCGCDGLOW24
How it works: SwitchGlo Pro simply plugs into a receiver channel, then to your glow plug. You assign a transmitter toggle switch to this SwitchGlo channel, and toggle your glow on and off, at startup or in-flight.
You can program mix SwitchGlo just as you can program mix any servo on your craft, allowing you to utilize your glow in ways you never thought possible! Low Throttle glow activation is achieved by programming your TX to activate the SwitchGlo channel at any throttle position you desire. You can further enhance your Low Throttle mix by assigning a toggle switch to activate the mix, thereby forever preventing "Hot Starts"
Know when you glow! - SwitchGlo will beep the entire time your glow plug is glowing, providing invaluable reassurance you never thought you needed! SwitchGlo helps you diagnose starting problems; a single beep from SwitchGlo signals the glow/ground loop is open, most often indicating your glow plug is spent. This feature greatly reducing your troubleshooting efforts!
Technology: SwitchGlo Pro is an intelligent and highly efficient on-board glow driver. Its state-of-the-art voltage adaptive algorithm optimizes the power transferred from your battery pack to your glow plug providing the ideal glow. Outfitted with low power components, switched-mode voltage regulation and adjustable firmware, SwitchGlo is not your conventional on-board glow system.
Other on-board glow systems use linear regulators that waste power (up to 3 times as much) and operate at dangerously high temperatures. These linear glow drivers also suffer from low glow at lower pack voltages, while SwitchGlo gives a strong and consistent glow from 4V - 9V. Combining the benefits of switch-mode voltage regulation and the smallest footprints on the market, SwitchGlo Pro is the most advanced way to glow! SwitchGlo Pro draws an insignificant 0.4mAh per 1 second of glow time and will not noticeably drain your receiver battery. Total onboard weight is only 25 grams including the pig tail.
Easy to cut gator off and solder on any plug connector you like, see options in drop down menu. Check out "Glow & Fuel Power Everthing" sub category "Glow Plug Fittings" for varieties. At your Add any of them to your basket and include a note with order that you'd like it added to your SwitchGlo Pro along with wire length you'd like. We'll do the soldering no charge!
Specifications:
Dimensions: 1.587" x .720" x .590"
Receiver cable: 8"
Glow Plug Pigtail: 8"
Weight: 28 grams with pigtail
Input Voltage: 4V - 9V input
Output Power: 4.8W
Power Consumption:
0.44mah per second of glow time
2.2mah per 5 seconds glow (average start)
4.4mah per 10 second glow (auto shut-off)
33mah to start craft for a typical 15 flights per charge
Over 2300 average glows on a 5200mah battery (assumes no other battery draw)
This device was designed to pair up with our Nano Electronic Receiver Switch. The mechanical relay gives you completely isolated switching of any circuit, and you can even use 120VAC power. Just apply power (5V) to the coil pins to make the relay switch. You could use this relay to control pretty much anything with your radio; a motor, a glow plug, a toaster (or maybe xmas lights?). This would also be perfect as a kill switch for an engine ignition and you won't have to worry about the ignition circuit causing interference because the circuits will be completely isolated.
May fit your screw-apart glow drivers (see notes below). Our most powerful Sub C size NiMH single cell.
Notes: Some glow drivers are smaller inside than others. These cells are double shrunk, removing outer layer of clear shrink takes off about .008" making od around .901 (22.88mm). Removing the inner printed layer of shrink gets the OD down to about .895" (22.733mm). The OD of the trusty CP2400 Nicad cell is about .877" (22.276mm). Measure the ID of your glow driver before ordering to be sure it will fit. Any cell may be run without shrink in aluminum glow drivers. Note date 01/04/12.
Suggested charge rate non-peak detecting 300mah or less, peak detecting .5 to 4 amps. (RX power wired packs are limited to 4 amps charge rate due to connector pins, the cell could sustain up to 10 amp peak charge rate with correct form charging, wiring and plugs.
FDK's original electrode manufacturing process, coupled with specialized current collectors minimize internal impedance, which in turn enables high-rate discharging and guarantees a stable discharge voltage.
Dimensions: 43.5mm High x 23.0mm Diameter
Weight: 0.14 oz (59 g)
Size: Sub C
Nominal Voltage: 1.2V
Typical Capacity: 3000mAh
Minimum Capacity: 2700mAh* *Minimum capacity when a single cell is discharged at 0.2lt after being charged at 0.1lt for 16 hours.
Quick Charge Current: 3000mAh* *Typical capacity when a single cell is discharged at 0.2lt after being charged at 0.1lt for 16 hours.
Accepts your glow driver and allows mounting the access point in a safer or more convenient location. May be mounted under motor mount lug. If mounted away from motor, a ground wire must be fashioned to run from a motor mount bolt to the mounting tab of the remote glow fitting. Save your fingers. Special Wire Clip attaches to tip of glow plug.
This fine tote was inspired by a customer at IRCHA wanting a field box that just held his fuel jug and tools, no power panel, no field battery. He didn't request any drawers but I couldn't help myself! You'll find 2 drawers for your goodies. Room to mount your fuel pump, carries anybody's 1 gallon jug or can. Tool stand has enough room for all your ball drivers, plier and hemostat slots abound. A little extra room in the corners of the jug area to stand up props, blades and etc..
Features 2 drawers., built in transmitter rack and glow plug caddy. Has a rugged 1" hardwood handle.
Kit is made from light weight plywood laser cut to exacting standards. Plenty of tabs assure easy alignment and enough glue surface never to fall apart unlike other less thought out field box kits. Ruggedly designed drawers have adequate clearance to slide smoothly even after application of paint or polyurethane. Many features never before available in any field box.
Specifications: Length: 15" Width: 7.25" Height: 16" Fuel Container Area 6.5" x 6.75" wide.
Weight: Only 2.5lbs Empty. (Weight after finish applied.)
Kit contains all wood, rubber feet, screws, hardwood handle and fuel jug. Approximate assembly time 1-2 hours. Stain or paint to taste.
4 Way with 8, 9, 10, and 12MM sockets. Tapped to hold 4 spare glow plugs. 8mm (long arm) socket fits glow plugs perfectly. Plug retainer feature built into socket ends dropped glow plugs forever. Center hex is 10mm.
Features: Input 4v to 9V Optimal Adaptive Glow Any Voltage Plug Audible Indicator Spent Glow Plug Alert Selectable Glow On Time No Onboard Battery or Recharging Easy Install and Maintenance Free Push Button Extender (Sold Seperately) LED Indicator (Sold Seperately)
This is Version 2 of our popular NERS. It plugs into one of your receiver channels and lets you turn a device on/off using a stick, switch, or knob on your transmitter. The device may be driven with RX power up to 10v or a separate battery up to 20V. The NERS performs the operation equivalent to a servo moving a mechanical switch back and forth, but in a much smaller package, and with no moving parts! The NERS will operate with any receiver running on 2-10V and can switch on/off pretty much any device up to 4A (5A for <5s) of current. The NERS V2 is perfect for lights, glow plug drivers, motors, smoke pumps, rocket igniters, solenoids, relays, and whatever else you can think up. Wired correctly, it could be used to trigger cameras or other electronic devices.
If you don't mind doing a bit of soldering, the NERS V2 can be easily reversed and assigned a fail-safe setting. The NERS V2 was designed to use the power from your receiver battery, or use a separate battery, up to 20V.
You may be wondering how the NERS V2 compares to the PERS, so here is a quick breakdown: The NERS V2 can handle up to 10V from the receiver whereas the PERS is limited to 6V The NERS V2 can handle a bit more current The wiring for connecting a separate battery is much easier with the NERS V2 The NERS V2 has the option of having an integrated universal connector, making it the smallest possible solution for that connector type
Choose your Connector from Options:
Specs:
Receiver Power: 2.0-10.0V
Receiver Current Draw: <1mA (LED off), 12mA (LED on)
Maximum Continuous Switch Current: 4.0 amps
Maximum Momentary (<5s) Switch Current: 5.0 amps
Maximum Switch Voltage: 20.0V (see instructions for using a separate battery)
Circuit size with header, not including wires: 25.2 x 7.6 x 2.9mm (1.00 x 0.30 x 0.11in)
Specs - Universal/JR 6" Lead
Weight: 3.25g (0.115oz)
Overall Length: 18.9cm (7.44in)
Receiver Connection: Universal/JR 0.1" connector, 6" 22AWG Futaba Color wire
The NERS V2 is available with 5 different types of servo connectors to accommodate the various micro receivers available today. Scroll down to view the different options and cart buttons. Packing Note: NERS's ordered in 1pc quantities will come in individual packages. 3 and 10pcs quantities may be supplied in one package with one set of instructions.
Great cord to get you out of trouble. Pump a charge in that glow ignighter and finish the day's flying. Many of today's fast chargers also charge single cells. Cord is short, about 6 inches long, to fit in field box easily. Bananas on one end, glow plug tip (to fit your igniter) on the other.
Tank compatible with all model fuels and smoke oils. Stopper included is for glow fuel only. Complete with all hardware and tubing required for tank. Generic photo from manufacturer to show general tank form. Height: 2-1/8" (54 mm). Width: 2-1/2" (63.5 mm). Length: 4-3/8" (111.13 mm) .
This Is 10oz Slant Type Flextank for Glow Fuel Operation from Sullivan.
FEATURES Molded from a special flexible, translucent polymer making it easier to fit into tight places. Very durable! Easy to install and remove because it can be squeezed. This tank kit includes all the hardware needed for glow fuel operation, including twist-tie clamps, brass and nylon tubing, heavy duty nylon caps, kunk, and rubber plug. Can be reshaped with a heat gun if desired. For glow fuel only! INCLUDES One 10oz Slant Type Flextank SPECIFICATIONS Capacity: 10oz (300ml) Height: 2-1/8" (54mm) Width: 2-1/2" (64mm) Length: 4-3/8" (111mm)
Glo-Devil Short Idle Bar Plugs. Fits all glow plug engines 12 & under and many .15 engines.
Glo-Devils are 1.5V Glow Plugs with high performance Platinum Elements designed to perform longer and better. They are available for 2 Cycle and 4 Cycle engines. Use caution on OS MAX & YS Engines as cylinder Head Damage can occur if the wrong glow plug is installed. 2 Cycle Engines.
The DU-BRO Nylon Wing Bolts are a simple, safe, and dependable way to secure the wings on your RC airplane. Designed for reliability and ease of use, these lightweight yet strong bolts help ensure your wings stay firmly in place during takeoffs, landings, and aerobatic maneuvers.
One of the standout features of these wing bolts is their dual-tool design. Each bolt features an outside hex head that fits your standard glow-plug or prop nut wrench, plus an inside socket designed for a standard Allen wrench. This gives you two secure, no-slip ways to tighten or remove the bolts--ideal for quick field assembly or adjustments at the workbench.
For larger models or aircraft requiring extra reach, the 3" Wing Bolts XL provide additional length for deeper mounting locations. These bolts also feature a large 0.5" diameter head that can be tightened using a Phillips or slotted screwdriver, offering even more flexibility and convenience.
Made from durable nylon, the bolts are fuel-resistant, lightweight, and designed to absorb vibration without backing out. They are also safer than metal bolts, helping to protect your airframe during hard landings or wing stress.
Each package includes 4 high-quality wing bolts, giving you a complete set for your aircraft or spares for your field box.
Proudly Made in the USA, DU-BRO Nylon Wing Bolts are an excellent upgrade for sport models, trainers, scale aircraft, and any plane that requires reliable, easy-to-handle wing mounting hardware.
Slender Glow Starter easily fits in pocket accepts your AA Rechargeable. Easily swap out battery whenever needed. Smaller glow starter fits in pocket easily. Machined aluminum case, fits any normal glow plug. Includes cap. Battery not included. SKU Number: RDHE0003
Like our 4D tote above except wider with double the drawers and a skosh more room in the fuel compartment means you can run a 1/2 gallon jug or 1 gallon fuel can in this compact field box.
Features 8 drawers, assortment of dividers for the thinner drawers. Built in transmitter rack and glow plug caddy. Power panel opens up to access additional storage space. Loop-Key cutouts for retaining your 1/2 gallon fuel bottle or 1 gallon fuel can with rubber bands or Vecro strip. False floor lifts out easily for service and replacement of your 12v battery. Has a rugged hardwood handle and a premade internal pathway for fuel pump wires.
Nothing on the market today gives you as much tool space or as many drawers!
Kit is made from light weight plywood laser cut to exacting standards. Plenty of tabs assure easy alignment and enough glue surface never to fall apart unlike other less thought out field box kits. Ruggedly designed drawers have adequate clearance to slide smoothly even after application of paint or polyurethane. Many features never before available in any field box.
Specifications: Length: 20.3" Width: 7.25" Height: 14.1" Battery Compartment footprint: 6.75"x3.85"x4.2" high. Fuel Container Area 4.35" deep x 6.75" wide. Weight: Only 4.55lbs Empty. (Weight includes finish.)
Kit contains all wood, rubber feet, screws, hardwood handle. Aproximate assembly time 2-3 hours. Stain or paint to taste.
Use to change/tighten glow plugs and most glow engine prop nuts with this handy 4 way wrench. Your field tote is not complete without a good fourway or two. Sizes 8mm (for glow plugs), 9mm, 10mm, 12mm. Center is 10mm, tapped for storage of 4 glow plugs in center. SKU Number: MPIACC114
The Pushbutton plugs into SwitchGlo Pro and is mountable anywhere on your craft. You can use it as a secondary glow trigger along with your transmitter or as the sole method to trigger SwitchGlo Pro. The Pushbutton is a 15 inches in length, thin, durable, and flexible. It can be twisted, folded and stuck anywhere with double stick tape or Velcro. The pushbutton area is trimable to your specific mounting location.
Sonic Tronics Special Design glow plugs for Non OS engines. Perfect for your Enya, Saito and HP engines. (Caution wrong plug can cause cylinder head damage OS 4 strokes.)
The PERS is a very tiny receiver-actuated on/off switch. It plugs into one of your receiver channels and lets you turn a device on/off using a stick, switch, or knob on your transmitter. The PERS performs the operation equivalent to a servo moving a mechanical switch back and forth, but in a much smaller package, and with no moving parts! The PERS will operate with any receiver running on 2-6V and can switch on/off pretty much any device up to 3A of current. The PERS is perfect for lights, glow plug drivers, motors, smoke pumps, rocket igniters, solenoids, relays, and whatever else you can think up. Wired correctly, it could be used to trigger cameras or other electronic devices. The PERS weighs just 0.3g, not including the 6" output wires (if left full-length these wires weigh another 0.3g).
If you don't mind doing a bit of soldering, the PERS can be easily reversed and assigned a fail-safe setting. The PERS was designed to use the power from your receiver battery, but it can also be configured to use a separate battery, up to 20V. Take a look at the PERS instructions (link below) for reverse/fail-safe settings and wiring diagrams.
The PERS is available with 4 different types of servo connectors to accommodate the various micro receivers available today. Scroll down to view the different options and cart buttons. Packing Note: PERS's ordered in 1pc quantities will come in individual packages. 3 and 10pcs quantities may be supplied in one package with one set of instructions.
Choose your connector option:
PERS with standard Universal/JR servo connector
This model comes with a standard universal/JR servo lead which will plug into any brand receiver which uses standard servo connectors. The servo lead is 3" of 28AWG wire in Futaba colors, but with a universal connector.
PERS with 1.00mm servo connector for Spektrum AR6400 receivers
This model comes with a 1.00mm servo lead that will plug into the Spektrum AR6400 and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in JR colors. The PERS is ten times lighter than the AR6400 receiver so it won't noticably affect the weight of your model. In one of the images below you can see the PERS plugged into an AR6400 receiver controlling a high-brightness LED.
PERS with 1.25mm servo connector for Futaba R616FFM micro receivers
This model comes with a 1.25mm servo lead that will plug into the Futaba R616FFM receiver and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in Futaba colors. The PERS is 20 times lighter than the R616FFM receiver so it won't noticably affect the weight of your model.
PERS with 1.50mm servo connector for Spektrum AR6300 receivers
This model comes with a 1.50mm servo lead that will plug into the Spektrum AR6300 and any receiver with compatible connectors. The servo lead is 1" of 30AWG wire in JR colors. The PERS is six times lighter than the AR6300 receiver so it won't noticeably affect the weight of your model.
Specs:
Receiver Power: 2.0-6.0V
Receiver Current Draw: <1mA (LED off), 5mA (LED on)
Maximum Continous Switch Current: 3.0 amps
Maximum Momentary (<2s) Switch Current: 4.0 amps
Maximum Switch Voltage: 20.0V (see instructions for using a separate battery)
Circuit size not including wires: 7.7 x 6.2 x 3.4mm (0.30 x 0.24 x 0.13in)
Specs - Universal Connector
Weight without output wires: 0.85g (0.030oz)
Weight with 6" output wires: 1.14g (0.040oz)
Overall length with 6" output wires: 23.7cm (9.25in)
Receiver connection: Universal/JR 0.1" connector, 3" 28AWG Futaba color wire
Specs - All Other Connectors
Weight without output wires: 0.30g (0.011oz)
Weight with 6" output wires: 0.59g (0.021oz)
Overall length with 6" output wires: 18.0cm (7.0in)
The Robinhood 25's bigger brother, now better than ever.
The Robinhood 80 is based on the original kit marketed by World Engines in the 1980's, but we have updated it significantly to more closely resemble the Curtiss Robin built back in the 1920's.
While still a fun-scale design, it is easy to build and retains all of the great flying characteristics that make a good sport airplane. In the air, the Robinhood 80 is a true barnstormer and is at it's best when cruising on a lazy afternoon or performing some gentle aerobatics.
Power can be from 20cc gas, .90-1.50 glow or an equivalent electric setup. We've designed the fuselage with a built-in hatches so you have quick access to your fuel (or batteries) and and radio system.
All of the formers, ribs, tips and other specialty parts come laser-cut. These pieces are engineered to fit together with a minimum amount of tools and/or jigs to align properly them.
The fuselage can be built as an inline version (as shown) or with a slightly shorter nose if you're rather install your own radial engine for that classic look.
Utilizing our unique WEB-LOCK construction, you can build both wing panels straight and true - with a minimum amount of fuss. Both wing panels are removable for easy transportation and storage, attaching to the fuselage with functional struts and a few bolts.
Included in each Old School Model Works kit are full-sized rolled plans, a printed construction manual, pre-bent main gear, hand-selected balsa and ply woods, and a premium hardware package from brand-name, USA manufacturers (DuBro, Sonic-Tronics, and others) to guarantee the best quality.
What's more is you can cover and finish your Robinhood 80 like you want, rather than being stuck with a "me-too" offering that look exactly the same as the others at your local field.
Specifications:
Wingspan: 80 inches
Wing Area: 1120 sq inches
Length (airframe only): 58 inches
Weight: 4.5 lbs. (framed), 8-10 lbs.(rtf)
Radio: 4 channel system:
Power:
o Glow (.90-.1.50 engine, 8-12 oz. ounce tank, fuel tubing)
o Gas (20cc engine, 8-12 oz. ounce tank, fuel tubing)
o Electric (equivalent brushless motor, ESC, and LiPo batteries)
Features of the Robinhood
80 Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
Pre-Bent Main Gear
As is the case with all Old School Model Works' kits, pre-bent main gear is included.
WEB-LOCK Construction There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Plug-in wings
An 80" wing is a hassle to transport. So we've re-engineered the RH80 with plug-in wing panels. Upper and lower Hatches An upper hatch (for tank and throttle access) as well as a lower hatch (for radio access) are built-in.
Wing Struts
Adding extra strength and scale looks, the RH80's struts are easy to make and quick to attach to the fuselage.
Additional items needed to complete the Robinhood 80 kit:
o Propeller
o Engine/Motor mount & mounting hardware
o Servo extensions and "Y" sharness (for ailerons)
o Pushrods (two 5" for ailerons, two 30" for elevator & rudder, one 12" for throttle if glow powered)
o Clevises for the pushrods (8 if electric, 10 if glow).
o 2 - 5" diameter wheels o 1 - tailwheel assembly
o Covering
Due to high demand, please allow 1-2 weeks for shipment, thank you!
An advanced trainer that's so much fun, it's SPOOKY!
When we designed the GHOST, we envisioned a trainer that could do more than the typical boring trainer. The GHOST needed to offer you the opportunity to train, advance, and even have fun - all with the same airframe. And that's just what we've accomplished.
To start, the GHOST has been designed as an easy-to-build model with a wealth of laser-cut parts. Actually, most every part used in the GHOST's construction is already pre-cut for you out of hand-selected lite-ply and balsa woods.
The wing is a flat-bottomed airfoil which is a cinch to build using our exclusive laser-cut WEB-LOCK construction that not only gives you proper rib spacing, but also holds each rib at a true 90? to the building surface, without the need for additional tools.
The fuselage is also an easy build as we've engineered the fuselage sides with slots to lock in each former at the right spot - and angle. Also, we've integrated our Multi-Size Servo mounts into the fuselage sides which makes mounting the rudder, elevator, servos a breeze (and throttle - if using glow).
<
Power can come from either glow or electric powerplants and there's a large, magnetic, top hatch which gives you quick access to the batteries and/or fuel tank.
At first, the GHOST might appear to be just a Good Honest Old School Trainer. But as they say "Wait, there's more!".
Flaps are included - a first for an OSMW kit. These are quite effective and can slow the GHOST to a crawl in the air. Choose to install them during the initial build, or they can be added at any other time - even after you've flown the GHOST for a while!
The GHOST's tall and wide main gear makes taking off from paved or grass surfaces quite easy. Throttle up, and you'll find the GHOST takes to the air in a surprisingly short rollout.
At lower throttle settings, the GHOST is slow and stable in the air, making it easy for a new pilot to learn how to navigate the skies. Throttle up the GHOST a bit and you'll start to open up more capabilities, including some fun barnstorming. At even higher speeds, the GHOST can perform a surprising amount of aerobatics to wow the crowds.
And all of this with the same airframe that many would write off as "simply a trainer".
Even when the wind gets a bit gusty, the GHOST's smooth flying characteristics will give you the confidence you need. When it comes time to land, simply lower the throttle and gently glide down to the runway. Again, no surprises, which is just what you want in any design.
And after you've mastered flying the GHOST, add to it's capabilities by adding in one of our Fun Fly Bay kits (available separately). Once assembled, these kits will bolt up through the bottom of the GHOST's fuselage. Like the GHOSTS's flaps, these kits can be added (or swapped out) at any time - even after you've flown for a while. For more information on these kits, check out the right hand column.
Specifications: Wingspan: 62 inches
Wing Area: 675 sq. inches
Length (airframe only): 42 inches
Weight: 4.5-6 pounds RTF
Radio: 4 to 6 channel (4-7 standard sized servos)
Power:
o Glow (.30-.46 glow)
o Electric (450+ watt, 60+ amp ESC, 3S to 4S LiPo)
Features of the GHOST:
Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.
WEB-LOCK Construction:
There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.
Front Hatch:
This top hatch gives you plenty of room to access the battery and/or fuel tank.
Flaps Included:
Flaps can be installed during the initial build, or added after you've flown for a while - your choice.
Additional items needed to complete the GHOST kit:
o Propeller
o Engine/Motor, mount & mounting hardware
o Radio system with 4 to 7 servos (stardard-size)
o 2 "Y" servo harnesses (one for ailerons, one for flaps)
o Pushrods (28" for elevator and rudder, 9" for throttle, 6" for the ailerons and flaps)
o Clevises for the pushrods.
o Wheels: two 3" main wheels, tailwheel assembly
o Covering (typically 2 rolls - more needed for higher complexity finishes)
Make It A Combo: GHOST Fun Fly Bay Kit (Drop)
Add this optional accessory kit to your GHOST to open up your Fun Fly Bay to Drop capabilities. Once assembled, it bolts into the fuselage and gives you the ability to RESPONSIBLY drop parachute men, candy, and other fun-fly items.
o Ready to assemble kit
o 37.5" cubic inch bay capacity - 5" x 2.75" x 2.75".
o Door mechanism is protected (separated) from the bay.
o Self-contained unit that bolts into the GHOST with two bolts.
o Includes installation hardware, hinge material and door mechanism.
o Also includes 1 parachute action figure.
o Plug your servo into a spare channel and it's ready to go.
o Requires a standard-sized servo and long servo arm (not included).
Due to high demand, please allow 1-2 weeks for shipment, thank you!
Due to high demand, allow at least 2 weeks or more for shipment.
The NI-STARTERA® has a 1.5" barrel and is supplied with an UL Approved 110V AC Charger. It locks onto the glow plug. Just push down, rotate, and it's locked onto the glow plug for hands free operation. The Metered NI-STARTER has a durable, shock resistant, dual faced amp meter to show the condition of your glow plug. When attached to your glow plug the meter will indicate plug condition, good or failed. This aids in determining the cause of many starting problems. The meter does not indicate the NI-STARTER charge condition. All versions of the NI-STARTERA® carry a 180 day warranty against defects in workmanship or the materials used. We further have an original ownership policy for the NI-STARTERA® beyond the warranty, contact us directly for the details.
Sonic Tronics Warrants their NI-STARTERS for 180 days. Please contact them directly below:
 "Glow Plug Igniter, Long, 84mm, w/Battery Charger")
 "Mini Glow Field Tote 4 Drawer")
 "24\" Glow Charge Cord")
 "SwitchGlo Pro")
 "Glo-Devil R/C 4 Stroke for OS")
 "Hansen Hobbies Onboard Mechanical Relay")
 "FDK Twicell 1.2V 3000mAh High Discharge Rate Sub C NiMH 43.5mm X 23.0mm")
 "Remote glow adapter with Wire Clip")
 "Fuel & Tool Tote 2 Drawer")
 "RD Super Metric Wrench")
 "PushGlo Onboard Glow Driver")
 "Hansen Hobbies NERS V2 Nano Electronic Receiver Switch")
 "6\" Glow Charge Cord")
 "Sullivan 10 ounce Slanted Glow Flex Tank")
 "Glo-Devil Standard Short Idle Bar Plug")
 "DU-BRO Nylon Wing Bolts - Secure RC Wing Fastening Hardware (4/pkg)")
 "AA Glow Starter")
 "Mini Glow Field Tote 8 Drawer")
 "4 Way Field Service Wrench")
 "SwitchGlo Pro Push Button LED 15 Inch Extension")
 "Glo-Devil R/C 4 Stroke for Non OS")
 "Hansen Hobbies PERS V2- Pico Electronic Receiver & Accessory Switch")
 "Old School Model Works Robinhood 80 Kit")
 "Old School Model Works Ghost Kit")
 "McDaniel 1.5\" Metered NI-STARTER With 110V Charger")
