Perfect for 1/2A airplanes. No shrink, no stretch, free running pushrod assembly. Light weight, flexible and strong. Complete 20 assembly includes (4) Mini Nylon Kwik-Links, (4) Spring Threaded Couplers, (2) 20 Long .047 diameter wire and (2) nylon sleeves.

TEMPORARILY OUT OF STOCK 

Each package includes two complete push rod systems, so you can set up two control surfaces--such as the elevator and rudder. Everything you need is included, and the parts are designed to work together for simple, clean installation.

Each set contains:

• 2 pushrods with a pre-bent 90? end, ready to use
• 2 pushrod housings that guide the rods and stop them from bending
• 2 Micro E/Z Links for attaching to your control horn
• 2 Mini E/Z Connectors for attaching to your servo arm and making easy adjustments

These components allow for smooth movement with very little friction. They also make it easy to fine-tune your control surfaces so your airplane responds the way you want it to.

The Micro Push Rod System is available in four different weights to fit a wide range of aircraft sizes:

• #847 - 3.2 grams per set
• #852 - 4.6 grams per set
• #922 - 5.7 grams per set
• #941 - 18 grams per set (for slightly larger electric planes)

This system works great on:

• Indoor flyers
• Small park flyers
• Slow flyers
• Foamies and EPP aircraft
• Lightweight scratch-built planes

Installation is quick and beginner-friendly. The housings glue easily to your model, and the connectors make attaching and adjusting your pushrods simple.

Proudly Made in the USA, the DU-BRO Micro Push Rod System provides a dependable and lightweight way to get precise control from your electric RC aircraft.

This item qualifies as a Rod Stock Item, read below:

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. Weight is in grams per meter, as per the manufacturer documentation, no guarantees on weight. Find other qualifying items to mix and match to meet the 6PC Minimum Purchase Requirement:

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634