- Shop >
- Hardware >
- Pushrods >
1.5mm (.055) Pushrods
|
Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.
All pushrods are found here. Select by size sub category below or in left column under "Pushrods".
|
| |
Cable Type Gold-N-Rods feature a Brass Plated Stainless Steel or Zinc Plated Steel Multistrand Cable, a Nylon Housing, Plated Hardened Steel Gold-N-Clevises and Brass Couplers. To install, cut the housing and cable to length. Glue the housing into the model. Attach a Brass Coupler or Clevis to one end (by soldering, gluing or crimping). Insert the cable, and attach a Coupler or Clevis to the other end. Thread Clevis(es) onto the Coupler(s); you need a Coupler on at least one end for adjustability. The .032 size cable is very flexible and light, and is excellent for throttle hookup for engine powered planes and for control surfaces in electrics and gliders. 2" Minimum Radius, 1 set per package S508 - 2-56 Hardware, 36" length SKU Number: SUL508
|
|
|
| |
36" (0.914M) ANTENNA HOUSING Handy plastic tube. Great way to get a plastic tube for custom push-rod or bearing purposes. Normally used to safely route an aircraft frequency antenna through a fuse. Use this also to route music wire push-rod, cable or any other creative purpose you have in mind. Just like 12" sections above except longer and natural semi-transparent clear/white color. Tube only, no cap or other hardware with this item. Photo shows a quantity of tubes. This item is shipped as 1 tube. We don't make you buy the whole package of 18. A single plastic tube from a Dubro 511 package will be shipped per item ordered.
Rod Stock Policy does not apply to this item because it can be shipped rolled. If ordered with other rod stock items (minimum 6 pieces of long rod like items) it will be shipped straight. - Works great for airplanes, cars, boats, and helicopters.
- Priced per piece, sold 24/tube increments only.
- Dimensions: 0.074" (1.88 mm) ID .134" (3.4 mm) OD
- Made in USA
SKU Number: DUB511
|
|
|
|