- Whats New >
- Hardware >
- Pushrods >
3mm Pushrods
|
Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.
All pushrods are found here. Select by size sub category below or in left column under "Pushrods".
|
|
| |
300mm long (12"). 3mm Metric threads. Plastic 4-40 clevis's will thread onto this wire nicely. Thread is metric and won't work with metal pre-threaded 4-40 clevises. Use to repair import models, here is the correct metric rod. SKU Number: RRCPR03M300
|
|
|
| |
Glue on to 2.5mm carbon or solder onto 2.5mm metal rod. Actual ID 2.65mm (.103"). Could also be soldered on to non-threaded end of roll-threaded 4-40 pushrod material or 3/32 music wire. Overall Length 33mm, threaded portion 16mm. 2 per package. Temporarily out of stock, order today to get in line for shipment when our next factory order arrives. SKU Number: RRCTRE3MM
|
|
|
| |
Aluminum sleeve with steel 2mm threads. Glue onto end of carbon tube to build your own pushrods. 2 per package. TEMPORARILY OUT OF STOCK SKU Number: MPJ2037
|
|
|
| |
Aluminum sleeve with steel 2.5mm threads. Glue onto end of carbon tube to build your own pushrods. 2 per package. TEMPORARILY OUT OF STOCK SKU Number: MPJ2038
|
|
|
| |
Fully threaded 3mm steel rod. 300mm Length. SKU Number: RRCAT300x3
|
|
|
|