|
|
Smallest of the GWS Direct drive line. Includes motor and 2 each 2.5 x 1 props. At 7.2V draws just .37 amps with 10.59g thrust. 2.64 watts of power, 4.06 grams static thrust per watt. Expect slightly higher output and current on 2S lipo pack. GWS Products warranty info. SKU Number: GWEDP05A
|
|
|
|
|
Smallest of the GWS Direct drive line. Includes motor and 2 each 2.5 x .8 props. At 7.2V draws just .33 amps with 8.04g thrust. 1.98 watts of power, 4.06 grams static thrust per watt. Expect slightly higher output and current on 2S lipo pack. GWS Products warranty info. SKU Number: GWEDP05B
|
|
|
|
|
Second smallest of the GWS Direct drive line. Swings a 2.5x8 prop, at 7.2V draws just .24 amps at 10.96g thrust, 1.73 watts of power, 6.34 grams static thrust per watt. GWS Products warranty info. SKU Number: GWEDP10A
|
|
|
|
|
Second smallest of the GWS Direct drive line. Swings a 2.5x10 prop, at 7.2V, draws just .54 amps at 13g thrust, 3.88 watts of power, 3.34 grams static thrust per watt. GWS Products warranty info. SKU Number: GWEDP10B
|
|
|
|
|
The same motor as used in an IPS drive just without pinion. Motor and two 4x2.5 props with our special internal collet. This motor will draw about 1.8 amps on a 2S lipo and 4x2.5 prop. This package is the motor and 2 props. 14.92 watts of power. About 75 grams (2.67oz) of static thrust. (5.02 grams static thrust per watt.) Models in the 3 to 5oz weight with around 60-120 square inches of wing area are popular for this system others outside this range might work well also. In fact, we have one model that flys quite well on this setup that weighs in at 7oz. A good replacement for glow motors in the .010 to .020 range.GWS Products warranty info. SKU Number: GWEDP50XC425
|
|
|
|
|
GWS Direct drive 280 power system is a perfect match for your traditional direct s-280 application. Included is a direct drive prop and spinner press on system. The only difference in these motors is the prop they come with. You might order the other two props so you can try all the combo's on your ship. Motor OD is 24mm (.944"), can length 30.5mm (1.2"), shaft length 10.66mm (.420"). Drive | Prop | Volts | Amps | Thrust | Watts | Grams/Watt |
---|
A | 4x2.5 | 8.4 | 2.5 | 100g | 21 | 4.76 | B | 4.5x4 | 7.2 | 2.91 | 95g | 20.95 | 4.53 | C | 5x3 | 7.2 | 2.8 | 99g | 20.16 | 5.90 | GWS Products warranty info. Limited quantities of Drives A & B EDP100B 4.4 x 4 ~SOLD OUT SKU Number: GWEDP100280ABC
|
|
|
|
|
'TIL IT'S GONE! Was $12 - GWS Direct drive 300 power system is a perfect match for your traditional direct s-300 application. Due to reduced battery and motor weight a S-300 is often an upgrade to a S-400 ship. Included is a direct drive prop and spinner press on system. The only difference in these motors is the prop they come with. You might order the other two props so you can try all the combo's on your ship. Drive | Prop | Volts | Amps | Thrust | Watts | Grams/Watt |
---|
A | 4x2.5 | 8.4 | 7.78 | 155g | 56.16 | 2.75 | B | 4.5x4 | 6.0 | 10.2 | 192g | 61.2 | 3.13 | | | | | | | | GWS Products warranty info. SKU Number: GWEDP-300(A,B,C)TIG
|
|
|
|
|
GWS Direct drive Speed 400 power system is a perfect match for your traditional direct s-400 application. Included is a direct drive prop and spinner press on system. The only difference in these motors is the prop they come with. You might order the other two props so you can try all the combo's on your ship. Chart below is with Nicads, be sure to add one cell for RRC-1000 NiMH which is suggested. Drive | Prop | Volts | Amps | Thrust | Watts | Grams/Watt |
---|
A | 5x4.3 | 8.4 | 10.3 | 291g | 86.52 | 3.36 | B | 6x3 | 8.4 | 11. | 360g | 92.4 | 3.89 | C | 7x3.r | 7.2 | 11.3 | 340g | 81.36 | 4.17 | GWS Products warranty info. SKU Number: GWEDP-400(A,B,C)
|
|
|
|
|
The MMG-1 geared motor system is designed for lightweight models. This motor system is limited to a maximum of 6-cell NiCad battery packs, or 7-cell NiMH battery packs. 2S Lipo packs are also reccomended. More voltage draw will damage the motor. Includes a 7 x 6 1/4 black molded plastic prop. 4.8:1 geared system for 9-10 oz. sized models. This motor system is useful for many small park fliers. It is the original motor for the MM Glider Tech Lil-Hornet, a small wing and stick fuse fun flying aerobatic model. The Lil-Hornet was the very first non-floater aerobatic type park flier model ever commercially produced. This motor system and the model it is associated with is of historic merit. SKU Number: MMGTMTRSYS
|
|
|
|
|
These little 50XC motors are fantastic for electrifying your foamy creations and many department store hand toss models just begging to be electrified. These are low voltage motors removed from geared systems. Dick in our shop runs these on 2 or 3S with the GWS 3-2, 3-3 or 4x2.5 prop for small high speed monsters. You must wire the motors in series and use them in pairs for the voltage to be correct. This would be an excellent choice for our Mini-Hunter and other similar sized models. Get a great twin setup here on the cheap! Each motor has wire and cap installed. Includes 2 each 12mm red dot GWS motors and a pair of press-on 3-3 props. SKU Number: TW12MNFUNPK
|
|
|