Safety Warning All Lithium Polymer (Lipo) batteries REQUIRE a Lithium Polymer Charger set by the user (you) to correct number of cells and charge rate of approximately capacity x 1. All charging should be in a firesafe container or outdoors away from flamables. Fires are rare but they do occur with user charging errors. Make sure your only loss is your battery and not your life or property.
Balancing every 5 to 10 charges is reccomended. Also be sure to repeat balance procedure when new or after any battery abuse/overheating or repair. Puffed cells are caused by charging to over 4.2v per cell, charging unbalanced packs, discharging over max C rate or otherwise abusing battery.
Lithium Poly Packs/Cells - Choose Sub-Category below for capacity range.
RRC 7.4V 2800 2S TX packs. Yes, this pack will fit in your Aurora 9 and the Airtronics SD-10G. These are lower C rate high energy density cells perfect for low drain applications like transmitters. This pack generally fits inside any TX that was made to hold a 6 cell flat 7.2V AA size TX pack.
Size: 3.71" (94.25mm) Long x 1.21" (30.6mm) Wide x .7" (17.8mm) High.
JR Z plug (like servo or RX battery plug for JR, Spektrum, Hitec, New Airtronics) is included on the pack. Balance plug is the ever popular XH Balance plug (like 75% of all packs made).
3S 2800 TX battery pack. This is a lower C rate high energy density cells perfect for low drain applications like transmitters. This pack generally fits inside any TX that was made to hold a traditional Square 9.6V AA size TX pack.
Size: 3.71" (94.25mm) Long x 1.21" (30.6mm) Wide x 1.05" (26.7mm) High.
JR Z plug (like servo or RX battery plug for JR, Spektrum, Hitec, New Airtronics) is included on the pack. Balance plug is the ever popular XH Balance plug (like 75% of all packs made).
Recently found languishing and ignored in our inventory. Would make a great RX pack with modern systems that can handle this voltage or through a regulator for everything else. Would also be a great driver for night lights or other interesting features/projects. Was $50, We've got one inventory bin of them left for low cost pickings. Sold As Is. All packs have been checked for proper voltage prior to shipping. Due to age, no guarantee on capacity. Discontinued, non-warranty, while supplies last. SKU Number: KOK2S2040LD4CTIG
Built in house with raw cells with solderable nickel tabs. Super High discharge 20C, 4.8Amp. Great little cell for sub mini indoor ships.
Lithium packs/cells require a Lithium Ion Charger rated for the correct number of cells as Ion and Polymer share the same charging method. Priced below in various configurations.
Pack Approximate Dimension: 1-1/4" Long x 1" Wide x 1-1/8" Thick
3S Pack Weight: .8oz/22.67g
Automatically comes with XH Balance Plug, Choose your balance wire length from the options.
Photo shows XT30 Yellow Plug, choose your output connector and wire length from the options.
Built in house with raw cells with solderable nickel tabs. Super High discharge 20C, 4.8Amp. Great little cell for sub mini indoor ships.
Lithium packs/cells require a Lithium Ion Charger rated for the correct number of cells as Ion and Polymer share the same charging method. Priced below in various configurations.
Pack Approximate Dimension: 1" Long x 1" Wide x 5/8" Thick
3S Pack Weight: .5oz/14.18g
Automatically comes with XH Balance Plug, Choose your balance wire length from the options.
Photo shows XT30 Yellow Plug, choose your output connector and wire length from the options.
 "2S 7.4V 2800mAh LiPo Transmitter Pack")
 "11.1V 3S 2800mAh LiPo Transmitter Pack")
 "Kokam 2040 2S 4C Pack")
 "RRC 3S 240mAh Lipo Super High Discharge 20C")
 "RRC 3S 70mAh Lipo Super High Discharge 20C")
