TD-ISRM PRO RF PERFORMANCE

With solid performance based on the dual-band 900M/2.4G RF signal link with multiple operating combinations of RF modes, the TANDEM X20R & X20RS versions are equipped with the TD-ISRM Pro built-in RF module which is capable of supporting multiple protocols (like TW, TD, etc), with same RF capability as X20 Pro editions.

The TD-ISRM Pro RF module has the dual 2.4G TW RF mode and supports simultaneous activation of working under TW and ACCESS R9 modes with the same module. In this configuration, the TW receiver and ACCESS R9 receiver can be connected via the SBUS IN/OUT ports to achieve redundant backup. This RF signal connection solution makes use of three different RF links at the same time in RC applications. This further enhances the RF signal's reliability, particularly in long-distance RC operations scenarios.

DIFFERENCES IN APPEARANCE & FUNCTIONAL INPUTS

The X20R and X20RS have changed from the original X20 design in appearance. The bottom hand grip adopts the overall design of the PRO version, eliminating the need for an additional grip cover, and allowing the bottom part to be fully grasped by the palm for a more comfortable and relaxed grip. Additionally, the Lite-type external module slot has been adjusted to provide more fitting installation space for external modules of different shapes, making it more convenient.

R and RS versions add 2 extra trims, allowing for more precise tunings during the operations. The slider levers on both sides of the transmitter support adjusting the positioning of the center, catering to different users' habits and preferences. The primary input components, including trim caps, center-slider caps, and knobs are all made from metal, offering rugged quality and enhanced durability for outdoor use.

UPGRADED ROBUST ANTENNA HANDLE & EXTERNAL LoRa ANTENNA CONNECTORS

The newly upgraded antenna handle incorporates the good capability of impact resistance facing the tough conditions of outdoor fields. The reinforced and thickened antenna casing is better suited for comfort gripping but also does not compromise the antenna's performance. On the contrary, the redesigned antenna can transmit signal data more effectively, providing pilots with a more reliable flying control experience.

The X20R & X20RS are also equipped with 2 external antenna connectors, which can be mounted with additional 2.4G and 900M antennas for enhancing the RF capabilities working under the LoRa modes, to achieve enhanced long-range control.

BUILT-IN MASS STORAGE & TEXT TO SPEECH FUNCTION

To save the user the trouble of deciding the storage capacity, both R and RS versions have a built-in 8GB flash storage that offers big storage to meet all your radio's storage needs with high data transmission speed.

Thanks to the upgraded storage feature, the TTS (Text-to-Speech) function of X20 RS versions can quickly and conveniently convert typed input English words into spoken speech. This enables the ETHOS system to more flexibly match the triggered operational status using generated speech audio when specific functions are activated and to alert clear outdoors with the digital power amplifier module.

DUAL-SIDE HAPTIC GIMBAL FEEDBACK The gimbal vibration feedback function can be easily enabled or disabled by setting a switch. The dual-sided Gimbal's vibration feedback can operate independently, allowing the configuration to match distinct feedback preferences tailored to various application scenarios for RC enthusiasts.

EASY TRAVELl-ADJUSTABLE MC20R GIMBALS (with ANY DESIRED DEGREE BETWEEN 45? to 60?)

The MC20R Gimbals also has an 8? rotatable panel and can be adjusted to a 45? travel position. What's even better is that the angle is not limited to just 45? and 60?, the MC20R Gimbal allows for adjustment of any travel position between 45? and 60?. To enhance convenience for pilots in outdoor applications, the angle travel position can be directly adjusted using a 1.5mm hexagon screwdriver through the adjustment hole on the Gimbal Panel, eliminating the need to disassemble the radio casing.

Features: 

• Built-in TD-ISRM Pro Dual-Band Internal RF Module

 - 900M/2.4G Dual Band TD Mode

- Dual 2.4G TW Mode

- ACCESS 2.4G & ACCESS R9 Modes

- 2.4G ACCST D16 Mode

• Further Improvements for Form Factor Design
• Super Low-Latency and Long-Range Control with Telemetry
• Upgraded Robust Antenna Handle
• 900M/2.4G External Antenna Connectors (LoRa mode)
• 800x480 Resolution Outdoor High Brightness Touchscreen
• 2 Angle Adjustable Slider Levers
• 2 Knobs, 4 Standard Trims with 2 Extra Trims
• 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear)
• All Knobs, Trims, and Central Linear-Slider with All-CNC Metal Caps
• Built-in 8GB Flash Drive Storage
• Text to Speech (TTS) Function
• Digital Audio Power Amplifier
• Built-in 6-axis Gyroscope Sensor
• High-Speed PARA Wireless Training System
• Data Transmission & Recharge System via USB Type-C Interface
• Haptic Vibration Alerts and Voice Speech Outputs
• MC20R All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing

 - Dual-side stick haptic feedback (Left/Right can do vibration independently.)

- Easy Travel-adjustable with any desired degree from 45? to 60?

- 8° rotatable panel

Specifications:

• Dimension: 205*213*90mm (L*W*H)
• Weight: 892g(Battery Excl.) / 1024g(Battery Incl.)
• Operating System: ETHOS
• Internal RF module: TD-ISRM Pro
• Number of Channels: Up to 24
• Built-in Flash Storage: 8GB
• Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
• Operating Temperature: -10?C~60?C (14?F~140?F)
• Operating Current: 600mA@7.4V (typ.)
• Charging Current: <=1A +-200mA
• Recharge System for 2S Li-ion Battery (USB Type-C Interface)
• USB Adaptor Voltage: 5V+0.2V
• USB Adaptor Current: >2.0A
• Backlit Touchable LCD Resolution: 800*480
• Compatibility: ACCST D16 & ACCESS & TD & TW receivers
• Lite Type External Module Bay

Beautiful, isn't she?

And like all great ladies, her graceful ways are evident the moment she takes to the skies.

The Minuette is designed to mimic the look and feel of those wonderful Edwardian flying machines that were flown by those magnificent men.

Building the wing is a snap, as all of the ribs are laser-cut as part of our WEB-LOCK construction for proper alignment with minimum fuss.

If you want to go truly "old school", it can be built for simple 3-channel control (rudder, elevator, and throttle). For even more control, the included ailerons can be made fully functional (4-channel control).

Although power can come from glow or electric powerplants, a simple 3s electric setup is really what the Minuette is designed around. We've created the fuselage with a huge top hatch so you have quick access to batteries and a radio, and it also hides the wing bolts.

In the air, the Minuette is a simple, easy-to-fly cruising aircraft. Takeoffs are in just a few feet, even from grass runways. Once airborne, relax and gently glide her through the air through a series of low-passes, gentle turns, and even horizontal figure eights. With a 3200mAh battery, you can easily achieve 10+ minute flights with plenty of battery left for some touch-and-go's before landing.

The Minuette can even handle a bit of light wind without too much problem, and she is at her best taking off and landing into those gentle winds, if possible.

Please note that the Minuette is not designed (or stressed) for aerobatics. Also, the removable flying wires in the Accessory kit are decorative and not needed to fly - just to look great.

Specifications:

• Wingspan: 67.5 inches
• Wing Area: 630 sq. inches
• Length (airframe only): 38 inches
• Weight: 3.5-4 pounds RTF
• Radio: 3 or 4 channel (Sub-Micro servos, similar to HS-5065MG)

Power:

• Glow (.15-.25 glow)
• Electric (250+ watt, 40+ amp ESC, 3S 3200+mAh LiPo)

Premium USA Hardware

Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.

WEB-LOCK Construction

There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.

Front hatch

This extra-large top hatch gives you plenty of room to access the battery. It also hides the wing-bolts and gives access to the radio compartment. It's rear lock makes it quick to remove and quick to lock the hatch place.

3 or 4 channels

To aileron, or not to aileron? Whatever your answer is, parts are included to build the wing either way.

Design your color scheme https://oldschoolmodels.com/images/minuette/osmw-minuette-color-scheme-blank.jpg

Additional items needed to complete the Minuette kit:

• Propeller
• Engine/Motor mount & mounting hardware
• Radio system with 3 or 4 servos (we used Sub-Micro servos in our prototypes)
• "Y" servo harness (for ailerons)
• Pushrods (we recommend pull-pull for elevator and rudder, 6" pushrods for the ailerons)
• Clevises for the pushrods
• Wheels: two 3.5" vintage look tires
• Covering (typically one 2-meter roll will work)
• Optional Accessory Kit for a more "scale-like" look

Minuette Accessory Kit:

Although this optional accessory kit is not necessary for the Minuette to fly, it does add a bit of "scale-realism". The flying wires and pylons are removable for easy transport of the wing and fuselage. It includes:

• Ready-to assemble 3D printed dummy motor (based on the Anzani "W" 3-cylinder). It is designed and printed by Innov8tive Designs, and meant to slip over your electric motor, mounting to the firewall
• Pre-bent upper and lower flying-wire pylons
• Anchors, removable flying wires, hooks, and shrink-tubing

Not shown:

• Laser-cut profile pilot
• 4-color, peel-and-stick sticker sheet (pilot and instrument panel only)
• Instruction sheet

Due to high demand, allow at least 2 weeks or more for shipment.

Each kit comes with 2 mounts and high quality socket head fasteners.

For those wanting to configure a forward looking still or movie camera setup without prop interference, you've just gained an excellent option.

Check drop downs for motor and ESC combo specials to go with this item.

Combo A-Brushed = 2 each 370-B gearbox's and motors, GWS 480 ESC, 2 JWT female pigtails & 1 set of GWS 8-4 x3 Blade Counter Rotating props. This set will provide excellent performance with straight up climb yet speed controlled just right for the Slow Stick. Wide open throttle time should be limited to 30 seconds, current will be about 10 amps per motor at WOT, max continuous is 8 amps. Who would have ever thought you could setup a high performance twin so inexpensively! Don't assume brushed setups can't be high perfromance, this system will really rock! The Price is OUTSTANDING!!

COMBO-B-Brushless = 2 each GWS 002 Outrunner, 2 GWS 28mm outrunner mounts, 2 Brushless ESC's, 2 sets 3.5mm bullets & 1 set of GWS 8-4 x3 Blade Counter Rotating props. Although bullet-like connectors come with the GWS motor, anybody with an ounce of sense changes them to real gold bullets. This setup performs nearly identical to the brushed above for a few amps lower draw.

All COMBO choices require soldering your harness together with parts provided. Your 3S generally 1000-2100 size pack is required. For Brushed setup, be sure to use Deans or Anderson Power Poles between ESC and battery. For brushless twin with single pack, solder both ESC's to one input plug.

SKU Number: RRCSSTPAMM

In the full-scale aviation world, the Very Light Jet category (VLJ) is comprised of small business jets that seat four to eight people. They give private pilots the speed to effortlessly zip past an ordinary Cessna 172 on the way to a weekend fly-in. With a VLJ, the pilot would be finished eating that $100 hamburger before the 172 even enters the landing pattern.

The design of our Raven is inspired by Terry Dunn's VLJ design published years ago in Fly R/C magazine. Although Terry's original design was a simple, foam park-flyer, it had great lines reminiscent of the VLJs that Cirrus, Sonex and others now produce - or even possibly Mooney, if they had ventured into private jets back in the day.

We based the size of the Raven around a 64mm EDF - a power system that's inexpensive, readily available, and has plenty of power for this type of design. It's mounted right up-top, in the air flow channel of the fuselage. From there, we massaged and reworked Terry's design, adding landing gear and re-engineering the fuselage to have a removable wing section. A little tuck here, a little snip there, and the Raven was born.

The Raven's wing is a snap to build. It utilizes our unique WEB-LOCK wing construction to lock in critical alignment locations. The stressed balsa skin makes the panels very light and surprisingly rugged.

We've designed the Raven's fuselage to be self-aligning, with a light-weight internal structure for added strength. Surrounding this is the outer balsa skin, which is strong, light-weight, and twist-resistant. Overall, this balsa/ply airframe is uncomplicated, lightweight, easy to build, and features precision laser-cut parts that fit together quickly and accurately.

Oh, and let's not forget that V-Tail. It's the Raven's party piece - the touch that gives it that unique look - its swagger - its style.

The wing is removable for storage/transport and for giving access to the radio/servo area. From there, you have easy access to install the radio and ESC. What's more, the fully assembled model can fit in the trunk of most cars.

Up front, there's a large hatch, which gives quick access to the battery and nose-gear. The hatch's spring-loaded latch makes swapping in a fresh pack a breeze.

When it comes time to fly, the Raven will surprise you in a number of ways: First, is the takeoff roll - it's shorter than you might expect!

Second, the Raven's wide flight envelope. It's just as much at home cruising around the pattern at lower throttle settings as it is tearing up the skies at full-throttle. Next is the Raven's surprising aerobatic capabilities. Now you'll never confuse this for a pattern ship, but Raven can easily perform loops, rolls, 1/2 Cubans, split-S, inverted flight and more - and most without needing a dive to start.

Lastly is the controllability. Even at very low speeds, you'll always feel that you have control of the Raven. And that controllability is a welcoming feeling when it comes time to land smoothly, slowly, and right down the runway.

Specifications:

• Wingspan: 47.25 inches
• Wing Area: 330 sq. inches
• Length (airframe only): 34.25 inches
• Weight: 1.7 pounds framed, 3.5-4 pounds RTF
• Radio: 4 channel with V-tail mixing
• Give 30+ in./oz. servos (Mini servos - similar to HS-5065MG

• 64mm EDF Power Unit (12 bladed unit - similar to Freewing E7207)
• 60+ amp ESC, 4S LiPo)

Features of the Raven:

Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.

WEB-LOCK Construction
There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.

Front hatch
This extra-large top hatch gives you plenty of room to access the battery. It's front spring-lock makes it quick to remove the hatch and quick to lock the hatch back in place.

Short Aileron and V-Tail Linkages
We've designed the Raven so the linkages are to be as short as possible, giving you positive, slop-free control. Exactly what you want in a high-performance design.

Design your color scheme

Download this sheet to design your Raven's color scheme.

Additional items needed to complete the Raven kit:

• 64mm EDF Power Unit (ESC, battery)
• Radio system with 5 servos (we used mini-sized servos in our prototypes)
• Pushrods: 6" pushrods for the ailerons and v-tail, 8-10" for the nose gear
• Clevises for the pushrods
• Servo extensions: four 12" for the control surface servos
• Y-harness for nose gear servo
• Wheels: one 1.5-2" (nose), two 2" (mains)
• Covering (typically 2 rolls will work, depending on the color scheme) 

Please note:

We've done everything we can to make the Ravem a fun and easy to assemble kit. That being said, THIS IS NOT A BEGINNER KIT. If you've never built this type of balsa kit before, you will probably experience many challenges along the way. The manual is not written for beginners - it is assumed that the builder has the skills and techniques needed for this type of build.

Due to high demand, allow at least 2 weeks or more for shipment.

Another interesting use is as a spacer to set the distance between accessories. Also useful as a slip on bushing to glue your special projects to. Laser cut from 3/16 aircraft grade plywood. Rugged enough for most any use. Each package contains 4 stops.

SKU Number: RRCSSBS

The KADET MARK II has provided thousands of fledgling R/Cers with their first success at radio control. The .40 size KADET MARK II is a full-house 4-channel trainer with ailerons.

You can't go wrong with a KADET! For over 25 years, the SIG KADET has been helping new R/C pilots earn their wings. It was the first model airplane on the market that was designed from the ground up for learning to fly R/C.

A SIG KADET has all the features a good trainer needs.

FEATURES:

High Wing Configuration For Stability

Flat Bottom Airfoil For Slow Flight Speed

Tricycle Landing Gear For Easy Takeoffs And Landings

Strong Sheet Balsa Construction For Durability

Comprehensive Photo-Illustrated Instructions

Wingspan 57.25 in 1455 mm

Wing Area 635 sq in 41.0 dm?

Length 44.25 in 1125 mm

Flying Weight: 5 lb 2268 g

Wing Loading 18 oz/sq ft 55 g/m?

Radio Required 4-Channel (not included)

Engine Required 2-Stroke .25 - .40 cu. in. (4.1 - 6.5 cc) (Not Included)

Set Up Specifications

Elevator 7/16 inch 11 mm Up and Down

Rudder 7/16 inch 11 mm Right and Left

Ailerons 7/16 inch 11 mm Up and Down

Center of Gravity 2-5/8 - 3-1/8 inch 67 - 79 mm Back from leading edge

Dihedral 2 degrees 2 degrees Pre Wing Panel

Incidence +1/4 degree wing, 0 degree stabilizer

Engine Offset 2-1/2 degree down, 0 degree right

Accessories English Metric Number Required Pilot None None 0

Main Wheels 2 1/4 inch 57 mm 2

Nose Wheel 2 3/4 inch 70 mm 1

Fuel Tank 10 ounce 296 cc 1

Spinner 2 inch 51 mm 1

Covering 2 rolls depending on trim scheme

KIT FEATURES:

Sig Easy Hinges

Full-Size Plans

Nose Gear Bearing

Engine Mounts

Free copy of "The Basics of R/C"

Control Horns

R/C Links and Rods

Elevator and Rudder Pushrods

Rugged Balsa/Ply Construction

Precision Die-Cutting

Steerable Nose Gear

Formed Aluminum Landing Gear

Molded ABS Cowling

Aileron Torque Rods and Pushrods

Bolts, Nuts, Screws

Photo-Illustrated Assembly Manual

Kadet Mk II Kit Instruction Manual

SIG BACKORDER, OUT OF STOCK

Back in 1970, the February issue of RCM magazine featured a construction article of a design that took the pattern world by storm. This revolutionary design was the brainchild of Joe Bridi and it went on to be one of the most successful pattern and sport models of all time.

This outstanding, contest-winning model was the Kaos and we've based our kit on that same original design, updating it's construction with laser-cut precision, yet keeping all of the outstanding flying characteristics that made the original a legend.

In addition to our unique WEB-LOCK wing construction, this kit also includes a wing jig which makes assembling this triple-tapered wing a snap. Using our techniques, you'll quickly build a wing that's accurate and true - it just so easy to build!

The fuselage is built around a self-aligning, light-weight box for added strength. Surrounding this is the outer balsa skin that is strong, light-weight and twist resistant even when performing high-stress maneuvers. Overall, this balsa/ply airframe is uncomplicated, lightweight, easy to build, and features precision laser-cut parts that fit together quickly and accurately.

The wing is removable via 2 bolts from the bottom of the fuselage and utilizes a dual-servo setup for accurate aileron control. The wing's thick symmetrical airfoil coupled with the fuselage's long tail moment create a neutrally stable plane. Power can come from glow or electric powerplants. We've designed the fuselage with a magnetic top hatch so you have quick access to either your fuel tank or batteries.

Because of the Kaos' simple, clean design, it's a pattern plane you'll instantly feel comfortable flying. What's more, you'll become a better pilot because the Kaos let's you concentrate on technique, not distractions like pipes and retracts.

Our Old School Model Work's Kaos 60 is a Senior Pattern Association and Vintage R/C Society legal design for vintage and retro pattern competitions.

Specifications:

Wingspan: 59 inches

Wing Area: 644 sq. inches

Length (airframe only): 53 inches

Weight: 6.5-8 pounds RTF

Radio: 4 channel

Power:

o Glow (.61 engine, 10 ounce tank, fuel tubing)

o Electric (.61 equivalent brushless motor, 85+ amp ESC, 6S LiPo)

Features:

Premium USA Hardware

Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.

Build both wings halves straight and true using the included wing jig.

There's nothing else like it. Our exclusive WEB-LOCK construction allows you to assemble the wings with a minimum amount of fuss.

Securely held in place with magnets, this hatch gives you easy access to batteries or fuel.

To help with C.G. balancing, we made the tank floor removable in case you'd like to place the receiver battery or the motor's ESC in the space under the floor.

Our Kaos 60 is a Senior Pattern Association qualifying design making it eligible for vintage/retro pattern competition.

Our Kaos 60 is a Vintage R/C Society qualifying design making it eligible for vintage/retro pattern competition.

Download this sheet to design your Kaos' color scheme.

o Propeller

o Engine/Motor mount & mounting hardware

o "Y" servo harness (for ailerons)

o Pushrods (two 5" for ailerons, two 32" for elevator & rudder, one 14" for nose gear, one 10" for throttle if glow powered)

o Clevises for the pushrods (10 if electric, 12 if glow).

o Wheels: one 2.5" nose, two 2.75" mains

o Covering

Due to high demand, please allow 1-2 weeks for shipment, thank you! 

Made in Colorado, USA

Specifications: 

• Wing Span: 27 in
• Overall Length: 23 in
• Wing Area : 265 sq. in.
• Flying Weight: 12.5 oz
• Wing Loading: 6.8 oz/sq. ft.
• Controls Required: 3 channel, R/E/T
• Construction: Balsa / Ply
• Category: Park Flyer 

Includes: 

• Illustrated instruction manual
• Hand selected laser-cut AAA balsa and hardwood stock
• Full length leading edge, turbulator, and spar wood stock
• Pre-bent wire landing gear
• Profile pilot and scale motor detail
• Comprehensive hardware package 

Required Electronics (or similar):

• Brushed Motor*: GWS 350C-CS 5.33:1
• Speed Control: 10A
• Propeller: GWS 10x4.7 SF
• Battery: LiPo 7.4V 800 mAh (25C)
• Servos: Hitec HS-55 (2 required) 

*This product was originally designed for a GWS brushed power system. These are no longer widely available. The upgrade path to brushless is given below: 

• Motor: Sport Park BL370 (1100KV) - requires EFLM1915 Motor Mount
• ESC: 20A
• Propeller: APC 9x4.7 SF

Required finishing items: 

• Trexler #6-G Balloon Wheels or similar 3.5 inch diameter foam wheel
• Covering film: 2 Rolls ParkLITE film
• CA Glue: Thin, Medium, and Thick Adhesives

SALE!

This kit can literally be built as fast as the modeler can apply CA glue and accelerator. Fantastic flight performance using either 2-stroke or 4-stroke engines. The aerobatic capabilities of this model are virtually unlimited due to its thick airfoil section and very light wing loading. A perfect club contest airplane.

Kit Features: Balsa and Ply Construction, Pre-Cut Sheet Balsa Tail Surfaces, Durable Aluminum Main Landing Gear, Formed Tailwheel Wire, Molded Clear Plastic Canopy, Full Size Plans, Fast-Building 2 Piece Wing For Easy Transportation, Full Size Plans, Engine Mounts, Sig Easy Hinges, Pushrods, Complete Hardware Pack & Large Decal Sheet.

Wingspan: 51.5 in 1308 mm
Wing Area: 614 sq in 39.6 sq dm
Flying Weight: 4.25-4.75 lb 1928-2150 g
Length: 48.25in 1226 mm
Radio Required: 4 Channel, 4 Servos
Recommended Engines: .40-.46 cubic in (6.6 - 7.5 cubic cm) 2-Stroke, .56-.65 cubic in (9.2 - 10.7 cubic cm) 4-Stroke

Special notes about electric from Dave: This model makes an excellent electric conversion. My first large electric was one of these on 20 1750FAUP Cells. Yikes, I'd love to do another one with modern packs! Here is how I'd do it. Yes, this is same chart as the 4 Star 40, similar weight and wing area. An under recognized yet excellent electric conversion model. Good weight to wing area. A little troublesome to get large NiMH packs into due to the wing tube. However, with Lipo's it's super easy to fit the pack. Below are my suggestions for a range of practical power systems.

Setup and Performance Chart

Motor	# Cells	Prop	Amps	Watts In	RPM	Thrust oz.	Pitch Speed MPH	Climb FPM	Est. Top Speed
Himax 3522-0990	3	12x6	41.7	469	8,470	62	48	1377	53
Himax 3528-800	3	12x10	37.4	421	6,950	66	54	1260	56
Himax 3528-800	4	11x7	36.6	549	9,770	65	68	1674	61
Himax 3528-1000	3	12x6	44.5	501	8,690	49	64	1490	54
Himax 3528-1000	4	11x5.5	51.4	771	11,660	61	85	2177	64
Himax 3528-1000	3	12x6	44.5	501	8,690	49	64	1490	54
Himax 5018-530	5	12x8	30.5	572	8,560	65	76	1839	63
Himax 5018-530	6	12x8	40.5	911	9,930	75	104	2766	73

Estimates based on manufacturers provided constants using E-Calc. High Quality 2100-3000mah used as trial cell in calculations. Presumed model weight of 76oz. @3 cells (added oz for higher cell counts). Actual performance may vary depending on components, accuracy of data provided by manufacturer, quality of battery, ESC, and many other factors.

Now available, extra shipping applies.

An easy-flying 2-meter glider for when you want to slow things down for a while. 

Whether you prefer power-assisted take-offs, high-starts, or slope soaring, this easy-to-build glider is the perfect way to spend a lazy afternoon.

We've gone the extra mile to ensure that the Wayfarer is as easy to build as it is to fly. There's a wealth of laser-cut balsa and plywood parts that go together straight and true. Laser-cutting even extends to the wing sheeting giving you the perfect fit.

A wing that is 2-meters long can be tough to transport so we've designed the Wayfarer's wing as two, plug-in panels.

As a bonus, we've also included all the parts needed to make the removable power pod.

Specifications:
Wingspan: 79.5 inches
Wing Area: 560 square inches
Length (airframe only): 37.25 inches
Weight: 26-28 ounces, ready to fly

Radio:
o 2-3 channel system
o 2, 40-70 in./oz. mini servos
o 3s 2200mah

Power:
o 2204/2206 sized brushless motor, 5" prop, 25amp esc

Premium USA Hardware
Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.

Power Pod
If you choose to launch via motor assist, we included all the pieces necessary to build this removable power pod.

Battery hatch
Held in place with thumbscrew, this hatch gives you easy access to batteries.

Additional items needed to complete the Wayfarer kit:
o 2-3 channel radio and servos
o Propeller
o Motor mount & mounting hardware
o Pushrods (two 24")
o Clevises for the pushrods
o Covering

Due to high demand, allow at least 2 weeks or more for shipment.

• MEDIUM VISCOSITY FORMULA
• CURES CLEAN AND CLEAR
• WILL NOT ATACK PAINT
• WORKS ON MOST PLASTIC AND VINYL
• NON-FLAMMABLE

Uses:

PLASTI-ZAP is a specialty CA adhesive developed for use on plastic and vinyl items. Most plastic modeling projects can be assembled with PLASTI-ZAP and very small amounts of ZIP KICKER. The special formula in PLASTI-ZAP allows it to screen out any mold release agents resulting in a permanent bond in 15 to 30 seconds. The joint can be filed and sanded in a minute or so, allowing extra fast assembly.

Helpful Hints:

Apply small drops of PLASTI-ZAP to one surface only then mate the parts. For large or long seams apply small drops 1/4 to 1/2 inches apart, one side only, along the entire seam, then join parts. Be careful to keep your fingers away from the glued joints until cured, this glue will bond your skin instantly to your model. For bonding chrome parts, scrape the chrome off of the bonding areas then apply the glue to one side only. If you want to use ZIP KICKER, apply very small amounts with a fine brush or toothpick. You do not need to apply kicker to the entire joint. For critical applications test sample joints for designed strength requirements.

Specifications:
Wing Span: 68 inches
Length: 46 inches
Weight: 52 ounces
Power: 200-350W

Picture shows kit with bent and painted depron wings. Yes, it will slide along pavement and ROG if you like. Pillow blocks are included for axle mounts if you'd like to create your own landing gear.

Advance Video to 1:28 to see 1905 Wright Flyer.

Choose only 1905 Wright Flyer accessories (NO KIT) below:

The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:

1. High Current Rating

2. Small Size

3. Proven Connector Reliability

4. Easy to Install

5. Easy to Use

This Package Includes the following:

1 - Base Bracket - Black

1 - Deans® Female Ultra Plug®

1 - Nut Ring

3 - Mounting Screws (Pan Head 2-56 x 1/2 Lg)

2 - Set Screws (Sharp Point 4-40 x 3/16 Lg)

Starting from a blank slate, Lucien Miller, CEO of Innov8tive Designs, set out to design the finest motors for the R/C aircraft market. Using the best materials available, such as hi-temperature N52 curved magnets, hi-temperature copper wire, high efficiency Kawasaki stator laminations, 7075 aluminum alloy and high-quality bearings, these motors truly live up to the name "BadAss". If you're tired of cheap motors that don't last, or motors with a complete lack of performance information (we call them mystery motors), then we think you're going to appreciate the new level of power, performance, and quality that BadAss motors offer.

Our performance charts are the most extensive and complete available anywhere. The specifications table included on each motor page is also very complete with all the information you may need to know about a motor. A full set of CAD drawings is also available for the motor, prop adapter and cross mount, allowing you to check the physical fit in your aircraft before you receive it. With all this information, it is easy to make an informed decision and purchase the ideal power system for your model every time.

BadAss motors provide multiple options for mounting a propeller. Included with each motor is the standard bolt-on style prop adapter, which works for most applications. An optional extra-long bolt-on prop adapter is also available if you are using a prop with a thick hub along with a spinner with a thick backplate. Both adapters come with a standard hex nut and a Ny-Lock hex nut, for modelers that prefer the security of a locking style nut. Also available is the optional Bolt-on Smooth Shaft prop adapter. This part allows you to use a collet style prop adapter, folding prop hub, or aluminum spinner with integrated collet adapter on your motor without having to move the shaft. A full line of replacement parts is available to keep your BadAss motor in top shape for years to come.

Once you see how motor information should be presented and experience the exceptional build quality and performance of BadAss motors, you may never buy another "Mystery Motor" again. Let us show you a better way to select a power system, and we believe that you will become a BadAss Power Systems customer for life.

Features:

• Strong N52 curved magnets rated for 150C (302F)
• High temperature copper windings rated for 180C (356F)
• Bolt-on threaded prop adapter included with standard and Ny-Lock nut
• Optional bolt-on smooth front shaft and extra-long threaded prop adapters are available
• Versatile mounting options to fit most aircraft firewalls
• Dual Shaft Retention system with C-clip and shaft collar
• Ribbed Flux Ring for added strength and increased cooling area

Included in the Box: 

• Motor with 4mm male bullet connectors installed
• Set of three 4mm female bullet connectors for your ESC
• Set of three red, black, and white heat shrink for your ESC
• Cross Mount with 4 flat-head mounting screws
• Bolt-on Prop Adapter with 3 hex socket head screws
• 1 Regular Prop Nut, and 1 Nylon Locking Prop Nut

Performance Data

BadAss 3530-570Kv Specifications:

Stator Diameter 35.0 mm (1.378 in)

Stator Thickness 30.0 mm (1.181 in)

Number of Stator Slots 12

Number of Magnet Poles 14

Motor Wind 8 Turn Delta

Motor Kv Value 570 RPM per Volt

No Load Current (Io) 1.54 Amps @ 10 Volts

Motor Resistance (Rm) per Phase 0.030 Ohms

Motor Resistance (Rm) Phase to Phase 0.020 Ohms

Maximum Continuous Current 75 Amps

Max Continuous Power (3-cell Li-Po) 830 Watts

Max Continuous Power (4-cell Li-Po) 1110 Watts

Max Continuous Power (5-cell Li-Po) 1390 Watts

Max Continuous Power (6-cell Li-Po) 1660 Watts

Motor Weight 319 grams (11.25 oz.)

Outside Diameter 43.5 mm (1.713 in.)

Shaft Diameter 6.00 mm (0.236 in.)

Motor Body Length 56 mm (2.205 in.)

Overall Shaft Length 78 mm (3.071 in.)

Motor Timing 5-10 degrees

PWM Frequency 8 KHz

Coming soon!