Your Shop Source!
Feeling grounded? We're still flying at Radical RC!

When we designed the GHOST, we envisioned a trainer that could do more than the typical boring trainer. The GHOST needed to offer you the opportunity to train, advance, and even have fun - all with the same airframe. And that's just what we've accomplished.

To start, the GHOST has been designed as an easy-to-build model with a wealth of laser-cut parts. Actually, most every part used in the GHOST's construction is already pre-cut for you out of hand-selected lite-ply and balsa woods.

The wing is a flat-bottomed airfoil which is a cinch to build using our exclusive laser-cut WEB-LOCK construction that not only gives you proper rib spacing, but also holds each rib at a true 90? to the building surface, without the need for additional tools.

The fuselage is also an easy build as we've engineered the fuselage sides with slots to lock in each former at the right spot - and angle. Also, we've integrated our Multi-Size Servo mounts into the fuselage sides which makes mounting the rudder, elevator, servos a breeze (and throttle - if using glow).

<

Power can come from either glow or electric powerplants and there's a large, magnetic, top hatch which gives you quick access to the batteries and/or fuel tank.

At first, the GHOST might appear to be just a Good Honest Old School Trainer. But as they say "Wait, there's more!".

Flaps are included - a first for an OSMW kit. These are quite effective and can slow the GHOST to a crawl in the air. Choose to install them during the initial build, or they can be added at any other time - even after you've flown the GHOST for a while!

The GHOST's tall and wide main gear makes taking off from paved or grass surfaces quite easy. Throttle up, and you'll find the GHOST takes to the air in a surprisingly short rollout.

At lower throttle settings, the GHOST is slow and stable in the air, making it easy for a new pilot to learn how to navigate the skies. Throttle up the GHOST a bit and you'll start to open up more capabilities, including some fun barnstorming. At even higher speeds, the GHOST can perform a surprising amount of aerobatics to wow the crowds.

And all of this with the same airframe that many would write off as "simply a trainer".

Even when the wind gets a bit gusty, the GHOST's smooth flying characteristics will give you the confidence you need. When it comes time to land, simply lower the throttle and gently glide down to the runway. Again, no surprises, which is just what you want in any design.

And after you've mastered flying the GHOST, add to it's capabilities by adding in one of our Fun Fly Bay kits (available separately). Once assembled, these kits will bolt up through the bottom of the GHOST's fuselage. Like the GHOSTS's flaps, these kits can be added (or swapped out) at any time - even after you've flown for a while. For more information on these kits, check out the right hand column.

Specifications:

Wingspan: 62 inches

Wing Area: 675 sq. inches

Length (airframe only): 42 inches

Weight: 4.5-6 pounds RTF

Radio: 4 to 6 channel (4-7 standard sized servos)

Power:

o Glow (.30-.46 glow)

o Electric (450+ watt, 60+ amp ESC, 3S to 4S LiPo)

Features of the GHOST:

Premium USA Hardware

Included in each Old School Model Works kit is a premium hardware package. We only source our hardware from brand-name, USA manufacturers to guarantee the best quality.

WEB-LOCK Construction:

There's nothing else like it. Build our wings, straight and true - with a minimum amount of fuss.

Front Hatch:

This top hatch gives you plenty of room to access the battery and/or fuel tank.

Flaps Included:

Flaps can be installed during the initial build, or added after you've flown for a while - your choice.

Design Your Color Scheme:

Download this sheet to design your GHOST's color scheme. OSMW GHOST COLOR SCHEME

Additional items needed to complete the GHOST kit:

o Propeller

o Engine/Motor, mount & mounting hardware

o Radio system with 4 to 7 servos (stardard-size)

o 2 "Y" servo harnesses (one for ailerons, one for flaps)

o Pushrods (28" for elevator and rudder, 9" for throttle, 6" for the ailerons and flaps)

o Clevises for the pushrods.

o Wheels: two 3" main wheels, tailwheel assembly

o Covering (typically 2 rolls - more needed for higher complexity finishes)

Make It A Combo: GHOST Fun Fly Bay Kit (Drop)

Add this optional accessory kit to your GHOST to open up your Fun Fly Bay to Drop capabilities. Once assembled, it bolts into the fuselage and gives you the ability to RESPONSIBLY drop parachute men, candy, and other fun-fly items.

o Ready to assemble kit

o 37.5" cubic inch bay capacity - 5" x 2.75" x 2.75".

o Door mechanism is protected (separated) from the bay.

o Self-contained unit that bolts into the GHOST with two bolts.

o Includes installation hardware, hinge material and door mechanism.

o Also includes 1 parachute action figure.

o Plug your servo into a spare channel and it's ready to go.

o Requires a standard-sized servo and long servo arm (not included).

Due to high demand, please allow 1-2 weeks for shipment, thank you! 

Due to high demand, allow at least 2 weeks or more for shipment.

RRC 64 rubber bands, 1/4 lb bag. This size is the same length as the SIG #64. Perfect for wings that are a little wider like the Sig Senior and others. 

Size: 3.5" Long x .25" (1/4") Wide

Weight: 1/4 lb bag 

TEMPORARILY OUT OF STOCK 

RRC 105 rubber bands, 1/4 lb bag. This size is the same length as the SIG #67, at 5" Long with more width. Perfect for wings that are a little wider like the Sig Senior and others. 

Size: 5" Long x .625" (5/8") Wide x .055" Thick

Weight: 1/4 lb bag 

TEMPORARILY OUT OF STOCK 

Built in house with raw cells with solderable nickel tabs. Super High discharge 20C, 4.8Amp. Great little cell for sub mini indoor ships.

Lithium packs/cells require a Lithium Ion Charger rated for the correct number of cells as Ion and Polymer share the same charging method. Priced below in various configurations.

Pack Approximate Dimension: 1-1/4" Long x 1" Wide x 1-1/8" Thick

3S Pack Weight: .8oz/22.67g

Automatically comes with XH Balance Plug, Choose your balance wire length from the options.

Photo shows XT30 Yellow Plug, choose your output connector and wire length from the options.

MANY NEW ITEMS

Solding Irons, Jigs, Tools More quipment than the Bond women. Can you believe more than 10 different Iron choices, 40 to 300 watts.

Solder, Pastes & Supplies Wick, Conductive Grease, Tip Cleaner, REAL 60/40 LEAD Solder - Choices Galore.

Surf path, column on left: Click Tools & Equipment, then within Tools you'll find Soldering Irons & Jigs along with Solder Pastes & Supplies.

Or get there quicker by following category roll down box above left.
SKU Number: SOLDERALL

Built in house with raw cells with solderable nickel tabs. Super High discharge 20C, 4.8Amp. Great little cell for sub mini indoor ships.

Lithium packs/cells require a Lithium Ion Charger rated for the correct number of cells as Ion and Polymer share the same charging method. Priced below in various configurations.

Pack Approximate Dimension: 1" Long x 1" Wide x 5/8" Thick

3S Pack Weight: .5oz/14.18g

Automatically comes with XH Balance Plug, Choose your balance wire length from the options.

Photo shows XT30 Yellow Plug, choose your output connector and wire length from the options.

WHILE SUPPLIES LAST 

Molicel INR-18650-P28A Specifications

CELL CHARACTERISTICS:

Capacity:

•  Typical    2800 mAh
                 10.3 Wh
•  Minimum 2600mAh
                 9.56 Wh

Cell Voltage:

• Nominal 3.6 V
• Charge 4.2 V
• Discharge 2.5 V
• Continuous Standard 2.8 A
• Charge Current Maximum 6.0 A
• Charge Time Standard 1.5 hr
• Discharge Current 35 A

Internal Resistance:  AC (1 KHz) 20 mΩ (Max)

                                  DC (10A/1s) 20 mΩ

Ambient Charge:       0°C to 60°C

Temperature Discharge:  -40°C to 60°C

Volumetric:     520Wh/l

Energy Density Gravimetric: 205 Wh/kg

NOW AVAILABLE!

INR18650-P28A

Molicel has dedicated our product development in the path of ultra-high power cells with focus.

[EDITS PENDING: The launch of a new generation 18650 power cell, INR-18650-P28A, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.]

This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.

Single Cell is in last photo. 

Molicel Battery - Ultra-high Power Cell INR18650-P28A

Cell Voltage: Nominal: 3.6 V; Charge: 4.2 V; Discharge: 2.5 V

Typical Capacity: 9.56Ah (10.3Wh) / 2600 mAh

Charge Current: Recommended: 2.8 A (1C); Maximum: 6.0 A (3C)

Discharge Current: Continuous (MAX): 35 A

Dimensions: Diameter: 18.6mm X Length: 65.2mm 

Weight: 46g

ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 ?C)

Choose your custom pack from the options below, if there's a plug and wire combination not listed, type in your request in the box provide below the options. Photos depict wire configuration options, want something different, type in your request in the box provided below the options.

Standard shape is Flat (side by side) as shown in photo. Stick packs may also be constructed as a "Stick" for narrow use.

There is no optional length for XH balance ends - use XH extension.

Use only Lithium chargers with an A123/LithiumWerks mode limiting charge voltage to 3.6V per cell.

Cell is purple in color as in last photo, same size as the #18650 1100mAh orange cell. 

LithiumWerks AER18650M2A2 3.2 V 1.8 Ah Lithium Iron Phosphate (LiFePO4) Battery Specifications:

Manufacturers Part Number 320749-001

Nominal Ratings:

Voltage 3.2 V

Capacity @ C/5 Typical (Min) 1.8 Ah (1.7)

Energy 5.76 Wh

Specific Energy 133 Wh/kg

Energy Density 330 Wh/L

Impedance (1kHz ACIR) < 20 m?

Cycle Life at 0.5C/0.5C, 100% DOD > 4000 cycles

Discharging:

Max Continuous Discharge Current 5.4 A (3C)

Max Pulse Discharge Current, 10s 18 A (10C)

Minimum Voltage 2.0 V

Temperature -20 oC to 60 oC

Charging:

Recommended Charge Voltage 3.6 V

Recommended Charge Current <= 0.9 A (C/2)

Max Continuous Current, >10 oC 2.7 A (1.5C)

Terminate Charge @ 3.6 V < 36 mA

Float Voltage 3.5 V

Temperature 0 oC to 60 oC

Storage:

Temperature -30 oC to 70 oC

Mechanical:

Diameter O18.5 +/- 0.1 mm

Length 64.95 +/- 0.2 mm

Mass 43.4 g +/- 1.0 g

Certifications:

Transportation shipped @ <= 30% SOC UN 3480, UN 38.3

Safety UL 1973, IEC 62620

*pending early 2024

See A123/LithiumWerks 1800 Single Cells Above for all other available data.

Want a custom pack? See our custom pack listings, or email us at Sales@RadicalRC.com, and we can special make any kind of pack you require!

Note: Photo shows sample Rx pack with double lead option.

For checking pack voltage between flights, our best advice currently is: Leave model on after flight, plug loaded volt meter directly into pack balance plug (charge port ok but not preferred) hold load engaged, switch model off. Allow pack to drain into meter for 5 seconds, take your reading. See my blog post Checking A123 RX Packs For Recharge Point for help in this area.

1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.

2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards. 

3. High Power: The cells have continuous discharge current 10C Peak discharge current.

4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.

5. Wild Voltage range: The working voltage range is 1.5V-4.1V.

6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.

7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.

8. Charge on Li-Ion mode set voltage to maximum 3.9-4.1V 

This listing is for 1 (one, single cell), multiple cells shown for example only.

TEMPORARILY OUT OF STOCK

1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.

2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.

3. High Power: The cells have continuous discharge current 10C Peak discharge current.

4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.

5. Wild Voltage range: The working voltage range is 1.5V-4.1V.

6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.

7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.

This listing is for one 4-Cell battery pack, single cells shown for example only.

SELECT YOUR OPTIONS BELOW TO CUSTOMIZE YOUR BATTERY PACK

TEMPORARILY OUT OF STOCK 

1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.

2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.

3. High Power: The cells have continuous discharge current 10C Peak discharge current.

4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.

5. Wild Voltage range: The working voltage range is 1.5V-4.1V.

6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.

7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.

This listing is for one 2-Cell battery pack, single cells shown for example only.

SELECT YOUR OPTIONS BELOW TO CUSTOMIZE YOUR BATTERY PACK 

TEMPORARILY OUT OF STOCK 

1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.

2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards. 

3. High Power: The cells have continuous discharge current 10C Peak discharge current.

4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.

5. Wild Voltage range: The working voltage range is 1.5V-4.1V.

6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.

7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.

This listing is for 1 (one, single cell), multiple cells shown for example only.

TEMPORARILY OUT OF STOCK

1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.

2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.

3. High Power: The cells have continuous discharge current 10C Peak discharge current.

4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.

5. Wild Voltage range: The working voltage range is 1.5V-4.1V.

6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.

7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.

This listing is for one 2-Cell battery pack, single cells shown for example only.

SELECT YOUR OPTIONS BELOW TO CUSTOMIZE YOUR BATTERY PACK 

TEMPORARILY OUT OF STOCK 

1. Long cycle life: The cycle is longer, compared with Lithium ion battery, can reach to 4000-4500 times.

2. Safety: Sodium-ion cells can be discharged to 0V for transport, avoiding thermal run-away hazards.

3. High Power: The cells have continuous discharge current 10C Peak discharge current.

4. Low temperature: Can be used in low temperature environments, with a discharge capacity of up to 85% at a temperature of -30 degrees.

5. Wild Voltage range: The working voltage range is 1.5V-4.1V.

6. Environmental abundance: Sodium is over 1000 times more abundant than lithium and more evenly distributed worldwide. So its price is more stable.

7. LOWER COST: Sodium precursors (such as Na2CO3) are far cheaper than the equivalent lithium compounds.

This listing is for one 4-Cell battery pack, single cells shown for example only.

SELECT YOUR OPTIONS BELOW TO CUSTOMIZE YOUR BATTERY PACK

TEMPORARILY OUT OF STOCK 

INR21700-P45B

Photo shows a 2S 2-Cell Flat Pack and a single cell for reference. 

Molicel has dedicated our product development in the path of ultra-high power cells with focus.

The launch of a new generation 21700 power cell, INR-21700-P45B, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.

This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.

Molicel Battery - Ultra-high Power Cell INR21700-P45B Single Cell

Cell Voltage: Nominal: 3.6 V; Charge: 4.2 V; Discharge: 2.5 V

Typical Capacity: 4.5Ah (16.2Wh) / 4500 mAh

Charge Current: Recommended: 4.5 A (1C); Maximum: 13.5 A (3C)

Discharge Current: Continuous (MAX): 45 A

Dimensions: Diameter: 21.55mm X Length: 70.15mm

Weight: 70g

ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 ?C)

Choose your custom pack from the options below, if there's a plug and wire combination not listed, type in your request in the box provide below the options. Photos depict wire configuration options, want something different, type in your request in the box provided below the options. See Battery Configuration Chart for examples reference.

Please indicate # Cells x # Cells and other notes in the "Battery Pack Shape Notes" box below, then in the Comments section at checkout tell us you're sending us a drawing, diagram, or photo. 

Some helpful shape descriptions:

Square: # Cells High x # Cells High, Even # Cells, looks like two cells on top of two cells from end view.

Block: # Cells Flat Wide x # Cells Flat High

Block Offset/Nested: # Cells Flat Wide x # Cells Flat High Offset/Nested

Double Stick: # Cells End to End beside # Cells End to End, "Shotgun barrel style"

Triangle: 3 Cells in a triangle (1 cell nested on top of 2 cells)

Triple Stick Triangle: 2 Sticks of #Cells End to End + 1 Stick of # Cells High Nested, multiples of 3 Cells

Triple Stick Flat: 3 Sticks # Cells x # Cells Flat, multiples of 3 Cells

Quad Stick Offset/Nested: # Cells per Stick, 2 Sticks Wide x 2 Sticks High, Offset/Nested, Even Cell Counts

INR18650-P28A

Molicel has dedicated our product development in the path of ultra-high power cells with focus.

[EDITS PENDING: The launch of a new generation 18650 power cell, INR-18650-P28A, featuring 7% higher capacity however 22% lower DCR compared to P42A. Its consistent 45A discharging performance has now enhanced hugely with superior fast charge capability up to 3C charging rate.]

This is a starting point of low impedance version that shall be ideal for premium segment in EV, eVTOL, micro-mobility, home appliances and more applications.

Single Cell is in last photo. 

Molicel Battery - Ultra-high Power Cell INR18650-P28A

Cell Voltage: Nominal: 3.6 V; Charge: 4.2 V; Discharge: 2.5 V

Typical Capacity: 9.56Ah (10.3Wh) / 2600 mAh

Charge Current: Recommended: 2.8 A (1C); Maximum: 6.0 A (3C)

Discharge Current: Continuous (MAX): 35 A

Dimensions: Diameter: 18.6mm X Length: 65.2mm 

Weight: 46g

ABOUT ADVANCED R&D PRODUCTS & APPLICATIONS bolt Up to 120W Higher retention for discharge energy up to 120W continuously loop 500+ Cycles High rate 80% retention electrical_services Fast Charge 13.5A continues charge south_west Lowest DCIR Max internal resistance 13.8 mOhm trending_down Low Impedance Growth Over long cycle thermostat Thermal Controlling In cell thermal distribution optimized (3-4 ?C)

Choose your custom pack from the options below, if there's a plug and wire combination not listed, type in your request in the box provide below the options. Photos depict wire configuration options, want something different, type in your request in the box provided below the options.

Product Description

• Function Range Accuracy
• DC Voltage 200mV-1000V +- (0.5%+1dgt)
• AC Voltage 2V-750V +- (0.8%+3dgt)
• DC Current 2mA-20A +- (0.5%+1dgt)
• AC Current 2mA-20A +- (1.0%+3dgt)
• Resistance 200Ω -20MΩ +- (0.8%+1dgt)
• Capacitance 2nF-20u F +- (2.5%+3dgt)
• Frequency 2KHz-20KHz +- (1.5%+5dgt)
• Diode Test -Yes
• Transistor Test -Yes
• Continuity Buzzer -Yes
• Auto Power Off -Yes
• Data Hold -Yes
• Power Supply 9V Battery 6F22 (battery not included)
• Maximum Display 1999
• Product Net Weight 300g
• Products Size 191x 89x 35mm
• Standard Accessories Test Lead, Battery, Manual.
• Case Color is Orange/Yellow

• 3-1/2 digits LCD, Max. reading 1999
• 8 function, 32 Ranges
• Data hold
• Low battery indication
• Auto Power Off
• Overload protection 

Accessories:

Test lead; Users Manual;

TD-ISRM PRO RF PERFORMANCE

With solid performance based on the dual-band 900M/2.4G RF signal link with multiple operating combinations of RF modes, the TANDEM X20R & X20RS versions are equipped with the TD-ISRM Pro built-in RF module which is capable of supporting multiple protocols (like TW, TD, etc), with same RF capability as X20 Pro editions.

The TD-ISRM Pro RF module has the dual 2.4G TW RF mode and supports simultaneous activation of working under TW and ACCESS R9 modes with the same module. In this configuration, the TW receiver and ACCESS R9 receiver can be connected via the SBUS IN/OUT ports to achieve redundant backup. This RF signal connection solution makes use of three different RF links at the same time in RC applications. This further enhances the RF signal's reliability, particularly in long-distance RC operations scenarios.

DIFFERENCES IN APPEARANCE & FUNCTIONAL INPUTS

The X20R and X20RS have changed from the original X20 design in appearance. The bottom hand grip adopts the overall design of the PRO version, eliminating the need for an additional grip cover, and allowing the bottom part to be fully grasped by the palm for a more comfortable and relaxed grip. Additionally, the Lite-type external module slot has been adjusted to provide more fitting installation space for external modules of different shapes, making it more convenient.

R and RS versions add 2 extra trims, allowing for more precise tunings during the operations. The slider levers on both sides of the transmitter support adjusting the positioning of the center, catering to different users' habits and preferences. The primary input components, including trim caps, center-slider caps, and knobs are all made from metal, offering rugged quality and enhanced durability for outdoor use.

UPGRADED ROBUST ANTENNA HANDLE & EXTERNAL LoRa ANTENNA CONNECTORS

The newly upgraded antenna handle incorporates the good capability of impact resistance facing the tough conditions of outdoor fields. The reinforced and thickened antenna casing is better suited for comfort gripping but also does not compromise the antenna's performance. On the contrary, the redesigned antenna can transmit signal data more effectively, providing pilots with a more reliable flying control experience.

The X20R & X20RS are also equipped with 2 external antenna connectors, which can be mounted with additional 2.4G and 900M antennas for enhancing the RF capabilities working under the LoRa modes, to achieve enhanced long-range control.

BUILT-IN MASS STORAGE & TEXT TO SPEECH FUNCTION

To save the user the trouble of deciding the storage capacity, both R and RS versions have a built-in 8GB flash storage that offers big storage to meet all your radio's storage needs with high data transmission speed.

Thanks to the upgraded storage feature, the TTS (Text-to-Speech) function of X20 RS versions can quickly and conveniently convert typed input English words into spoken speech. This enables the ETHOS system to more flexibly match the triggered operational status using generated speech audio when specific functions are activated and to alert clear outdoors with the digital power amplifier module.

DUAL-SIDE HAPTIC GIMBAL FEEDBACK The gimbal vibration feedback function can be easily enabled or disabled by setting a switch. The dual-sided Gimbal's vibration feedback can operate independently, allowing the configuration to match distinct feedback preferences tailored to various application scenarios for RC enthusiasts.

EASY TRAVELl-ADJUSTABLE MC20R GIMBALS (with ANY DESIRED DEGREE BETWEEN 45? to 60?)

The MC20R Gimbals also has an 8? rotatable panel and can be adjusted to a 45? travel position. What's even better is that the angle is not limited to just 45? and 60?, the MC20R Gimbal allows for adjustment of any travel position between 45? and 60?. To enhance convenience for pilots in outdoor applications, the angle travel position can be directly adjusted using a 1.5mm hexagon screwdriver through the adjustment hole on the Gimbal Panel, eliminating the need to disassemble the radio casing.

Features: 

• Built-in TD-ISRM Pro Dual-Band Internal RF Module

 - 900M/2.4G Dual Band TD Mode

- Dual 2.4G TW Mode

- ACCESS 2.4G & ACCESS R9 Modes

- 2.4G ACCST D16 Mode

• Further Improvements for Form Factor Design
• Super Low-Latency and Long-Range Control with Telemetry
• Upgraded Robust Antenna Handle
• 900M/2.4G External Antenna Connectors (LoRa mode)
• 800x480 Resolution Outdoor High Brightness Touchscreen
• 2 Angle Adjustable Slider Levers
• 2 Knobs, 4 Standard Trims with 2 Extra Trims
• 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear)
• All Knobs, Trims, and Central Linear-Slider with All-CNC Metal Caps
• Built-in 8GB Flash Drive Storage
• Text to Speech (TTS) Function
• Digital Audio Power Amplifier
• Built-in 6-axis Gyroscope Sensor
• High-Speed PARA Wireless Training System
• Data Transmission & Recharge System via USB Type-C Interface
• Haptic Vibration Alerts and Voice Speech Outputs
• MC20R All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing

 - Dual-side stick haptic feedback (Left/Right can do vibration independently.)

- Easy Travel-adjustable with any desired degree from 45? to 60?

- 8° rotatable panel

Specifications:

• Dimension: 205*213*90mm (L*W*H)
• Weight: 892g(Battery Excl.) / 1024g(Battery Incl.)
• Operating System: ETHOS
• Internal RF module: TD-ISRM Pro
• Number of Channels: Up to 24
• Built-in Flash Storage: 8GB
• Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
• Operating Temperature: -10?C~60?C (14?F~140?F)
• Operating Current: 600mA@7.4V (typ.)
• Charging Current: <=1A +-200mA
• Recharge System for 2S Li-ion Battery (USB Type-C Interface)
• USB Adaptor Voltage: 5V+0.2V
• USB Adaptor Current: >2.0A
• Backlit Touchable LCD Resolution: 800*480
• Compatibility: ACCST D16 & ACCESS & TD & TW receivers
• Lite Type External Module Bay