GF Nylon Spinners have light weight aluminum back plate. No special prop nut or adapter is required. Spinner is held to back plate with two attachment screws. Machined groove supports edge of spinner. Back plate is knurled on both sides to grip both your prop and prop adapter making it easier to tighten than other spinners of this style.

Size: 1.75" (45mm) OD.

Factory shaft hole in back plate: .197" (5mm hole)

Overall Length: 1.8" (45.7mm)

See this and all other new sizes up to 75mm in Spinners-Fixed-Props. Within "E-Power-Everything" category.

Light weight design made of high quality aluminum bar stock. Polished to mirror finish. Comes with 3.2 (1/8"), 4mm, and 5mm collets. Reverse Pitch Version.

ProSpin spinners are made from high quality barstock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.

Notes on Ordering:

1. Find out the size of the prop nut you need.

2. If you need a different prop nut, you need to order it separately.

3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.

Light weight design made of high quality aluminum bar stock. Polished to mirror finish. Comes with 4 and 5mm collets.

ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.

Notes on Ordering:

1. Find out the size of the prop nut you need.

2. If you need a different prop nut, you need to order it separately.

3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.

SOLD OUT

Light weight design made of high quality aluminum bar stock. Polished to mirror finish. Comes with 4 and 5mm collets.

ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.

Notes on Ordering:

1. Find out the size of the prop nut you need.

2. If you need a different prop nut, you need to order it separately.

3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.

Warbird 4 blade type spinner. Fits GWS P51. OD is 55.5mm (2.185"). Useful where you might use the GWS 4 blade 10-8 prop or others. This bolt on type spinner is predrilled for 3mm shaft, easily drilled for larger shafts or prop adapers. (Superceded part number was EPS-7Ax4)

LIMITED SUPPLY 

GF Nylon Spinners have light weight aluminum back plate. No special prop nut or adapter is required. Spinner is held to back plate with two attachment screws. Machined groove supports edge of spinner. Back plate is knurled on both sides to grip both your prop and prop adapter making it easier to tighten than other spinners of this style. Size 2.25" (57mm) OD. Factory shaft hole in back plate is .252" (6.4mm). Overall Length is 2.265" (57.5mm).

See this and all other new sizes up to 75mm in Spinners-Fixed-Props. Within "E-Power-Everything".

Fits 5/32"(4mm) shaft diameter. Weight: .85oz(24g) for Cobalt 05, 15, 20, brushless motors.

ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.

Notes on Ordering:

1. Find out the size of the prop nut you need.

2. If you need a different prop nut, you need to order it separately.

3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.

Light weight design made of high quality aluminum bar stock. Polished brushed finish. Comes with 4mm collet. Reverse Pitch Version.

Fits 5/32"(4mm) shaft diameter. Weight: 1.07oz(30g) for Cobalt 05, 15, 20, brushless motors.

ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do.

ProSpin spinners are also 30% lighter than cast aluminum.

All spinners include a shaft bushing, prop nut, and bolt.

All spinners are polished to a brushed metal finish.

Notes on Ordering:

1. Find out the size of the prop nut you need.

2. If you need a different prop nut, you need to order it separately.

3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.

Temporarily out of stock

Cut for reverse (counter rotating or pusher) prop. Light weight design made of high quality aluminum bar stock. Polished to mirror finish. Comes with 2.3, 3.2 and 4mm collets.

Fits 2.3mm, 1/8"(3.2mm), 5/32"(4mm) shaft diameter. Weight: .26oz(7g) for Cobalt 400, Speed 400 motors.

ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.

Notes on Ordering:

1. Find out the size of the prop nut you need.

2. If you need a different prop nut, you need to order it separately.

3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.

GF Nylon Spinners have light weight aluminum back plate. No special prop nut or adapter is required. Spinner is held to back plate with two attachment screws. Machined groove supports edge of spinner. Back plate is knurled on both sides to grip both your prop and prop adapter making it easier to tighten than other spinners of this style. Size 2" (51mm) OD. Factory shaft hole in back plate is .248" (6.22mm). Overall Length is 2.032" (51.6mm).

See this and all other new sizes up to 75mm in Spinners-Fixed-Props. Within "E-Power-Everything".

See this and all other new sizes up to 75mm in Spinners-Fixed-Props. Within "E-Power-Everything".

High quality precision anodized aluminum 51mm spinner-prop adapter combination. For 5.0mm(0.20") motor shaft.

High quality precision anodized aluminium spinner-prop adapter combination. For 4.0mm motor shaft.

Note: Color is Silver despite photo color of red, new photo pending. 

The 51mm Air-Flow spinners have a backplate that is 51mm (2 inches) in diameter with an overall length of 46.6mm (1.83 inches). The complete spinner weighs 17.8 grams or 0.74 ounces. 

The Air-Flow Spinners feature a molded plastic spinner cone with a machined aluminum backplate. They are available in 6 different sizes and 5 different colors to fit a wide range of aircraft models. The spinner cones on the 51mm (2-inch) through 75mm (3-inch) sizes are attached to the backplates with a pair of M3 x 6mm socket-head screws, which require a 2.5mm hex wrench to tighten. The largest 82mm (3-1/4") spinners use four of the M3 x 6mm socket-head screws to hold the spinner cone to the backplate.

These spinners are designed to be used with electric motors and feature a set of six angled slots that pump air through the spinner, directly into the motor behind it, to help keep the motor running cool during use. The aluminum backplates have large lightening holes in them to allow cooling air to pass through. These holes also decrease weight and rotational mass of the spinner for quicker motor acceleration. The backplates have a raised knurled area on both sides around the center hole, which provides a firm grip on both the back side of the propeller and on the face of the motor's prop adapter. The spinner backplates have an 8mm mounting hole in the center and comes with a set of plastic reducing adapters so they can also fit onto 6mm, 5mm, 4mm or 3mm motor shafts.

The 51mm Air-Flow spinners have a backplate that is 51mm (2 inches) in diameter with an overall length of 46.6mm (1.83 inches). The complete spinner weighs 17.8 grams or 0.74 ounces.

NOTE: "YELLOW-GOLD-ORANGE" color is like... just think of your childhood mac-n-cheese ;-)

The 57mm Air-Flow spinners have a backplate that is 57mm (2-1/4 inches) in diameter with an overall length of 51.8mm (2.04 inches). The complete spinner weighs 21.6 grams or 0.76 ounces. 

The Air-Flow Spinners feature a molded plastic spinner cone with a machined aluminum backplate. They are available in 6 different sizes and 5 different colors to fit a wide range of aircraft models. The spinner cones on the 51mm (2-inch) through 75mm (3-inch) sizes are attached to the backplates with a pair of M3 x 6mm socket-head screws, which require a 2.5mm hex wrench to tighten. The largest 82mm (3-1/4") spinners use four of the M3 x 6mm socket-head screws to hold the spinner cone to the backplate.

These spinners are designed to be used with electric motors and feature a set of six angled slots that pump air through the spinner, directly into the motor behind it, to help keep the motor running cool during use. The aluminum backplates have large lightening holes in them to allow cooling air to pass through. These holes also decrease weight and rotational mass of the spinner for quicker motor acceleration. The backplates have a raised knurled area on both sides around the center hole, which provides a firm grip on both the back side of the propeller and on the face of the motor's prop adapter. The spinner backplates have an 8mm mounting hole in the center and comes with a set of plastic reducing adapters so they can also fit onto 6mm, 5mm, 4mm or 3mm motor shafts.

The 57mm Air-Flow spinners have a backplate that is 57mm (2-1/4 inches) in diameter with an overall length of 51.8mm (2.04 inches). The complete spinner weighs 21.6 grams or 0.76 ounces.

See this and all other new sizes up to 75mm in Spinners-Fixed-Props. Within "E-Power-Everything".

NOTE: "YELLOW-GOLD-ORANGE" color is like... just think of your childhood mac-n-cheese ;-)

Light weight design made of high quality Brushed Aluminum Bar Stock Finish. Comes with 4mm collet.

ProSpin spinners are made from high quality bar-stock for strength. They won't crack like cheap cast aluminum spinners do. ProSpin spinners are also 30% lighter than cast aluminum. All spinners include a shaft bushing, prop nut, and bolt. All spinners are polished.

Notes on Ordering:

1. Find out the size of the prop nut you need.

2. If you need a different prop nut, you need to order it separately.

3. Some engines, i.e. Saito engines, require a bushing that is larger than the nut.

New style Brushed Aluminum Finish.

OUT OF STOCK, FACTORY BACKORDER