|
| |
New from Fox Lite Models!
A complete, precision kit for handling-using/storing CA on your building board.
Includes:
24 3/4" x 7" x 3/8" white nylon non stick plate for your CA work surface.
10 each, pipettes or bulb syringes.
White nylon stand for holding filled syringes.
Two aluminum angle building jig/blocks.
12 small plastic mixing/glue/CA cups.
SKU Number: FOXCAKIT
|
|
|
|
|
| |
Trimmable Adhesive pipette tips making trimming to your favorite hole size a snap. About 2.75" long. May be used for thin, trimmed for thicker CA's, or trimmed for capillary tubing if you like. Great way to extend your CA bottle life and prevent over application of glue. 10 parts per package.
SKU Number: RRCTAT10PK
|
|
|
|
|
| |
Mercury Applicator Extension Tips:
These are great for applying CA into areas where you can not normally reach. The unique design continues the Mercury Adhesives tradition of extremely high quality products with unique and functional dispensers that resist clogging.
Extension Tips ship four (4) to a pack and are one size fits all of Mercury's 1 and 2 oz bottles. Replaces former Mercury Teflon tips of all sizes.
SKU Number: MERAET
|
|
|
|
|
| |
New from Radical RC!
A complete set of 8, precision, soft clear plastic pipettes for handling-using/storing CA on your building board.
Bulb on one end and other end tapers down to a narrow tube for dispensing CA exactly where you want it to be! Fine tip perfect for Thin CA's.
SKU Number: RRCPIPETF
|
|
|
|
|
| |
New from Radical RC!
A complete set of 8, precision, soft clear plastic pipettes for handling-using/storing CA on your building board.
Bulb on one end and other end tapers down to a narrow tube for dispensing CA exactly where you want it to be! Use these Medium tips for Medium and thick CA, Alphatic Resin etc....
SKU Number: RRCPIPETM
|
|
|
|
|
| |
Graduated 1 ounce mixing cups.
SKU Number: GPMR8056
|
|
|
|
|
| |
Shorter stouter CA bottle tips with glue application hole similar to stock bottle size. 10 tips per package.
SKU Number: HOBNEC08
|
|
|
|
|
| |
Pipette style CA bottle tips. About 2 3/4" long. May be used for thin and medium CA's. May be trimmed several times before discarding. Great way to extend your CA bottle life and prevent over application of glue. 10 parts per package.
SKU Number: RRCCAPF10PK
|
|
|
|
|
| |
6' section of CA capillary tubing. Put a section in the tip of your bottle then trim back occasionally to remove clogs. Helps extend the life of you bottle tips. TEMPORARILY OUT OF STOCK
SKU Number: HOBNEC04
|
|
|
|
|
| |
6 CA applicator tips. Press on bottle tip. TEMPORARILY OUT OF STOCK
SKU Number: HCAR3780
|
|
|
|
|
| |
10 CA bottle tips plus 15'" of capilary tubing. Keep a fresh tip on your bottle and extend the life of the factory cap with these handy disposable tips. Capilary tubing may be pressed into these tips (and many others) for extended reach and precision application of adhesive. Great item to have in your goodie box to aid with difficult to reach jobs.
SKU Number: PACPT18
|
|
|
|
|
| |
A convenient 1/2 oz. plastic syringe for dispensing model cement, aliphatic resin glue, white glue, or epoxy glue. Allows you to precisely control the amount and placement of your adhesives for a lighter, neater building job. Also handy for injecting glue inside splits and breaks when repairing crash damage. Extremely small, pointed tip is tailor made for those hard to get at places on a model. The curved tip makes it possible to go around corners and into blind spots. This is a top quality mini glue gun that will give you years of service if you clean it thoroughly after every use.
SKU Number: SIGSH627
|
|
|
|
|
| |
Useful for breaking down larger containers of adhesive, replacing damaged bottles, etc... Each container has an open applicator spout. Bottle Accepts many glue applicator tips like HOBNEC07 Flexy Tips and HOBNEC08 Z Ends
SKU Number: HOBNEC03
|
|
|
|
|
| |
These disposable sticks are handy to have when mixing paint or epoxy - inexpensive.
Package of 25 Stix.
SKU Number: DUB346
|
|
|
|
|
| |
Replacement tops for our 4 ounce Parfix epoxy bottles. Compatible with many small epoxy bottles. Yes, we realize they are both tipped in red caps. That is the only way we have them. If you need to freshen up an expoxy bottle set, here are your parts. Maybe you have a black tip from your old set to get the colors right.
SKU Number: RRCYORKER4OZ
|
|
|
|
|
| |
Replacement tops for our 8 ounce Parfix epoxy bottles. Compatible with many small epoxy bottles. If you need to freshen up an expoxy bottle set, here are your parts.
SKU Number: RRCYORKER8OZ
|
|
|
|
|
| |
Four Inch Wide Epoxy Spreader is a handy flexible plastic tool, just what you need when working with glass resin or epoxy glue. Lots of uses! Allows you to lay on a thin, smooth coat of glue where you want it. Great for working glue or resin into dry glass cloth until full saturation is achieved. Then use it as a squeegee to scrape off the excess glue and push the glass cloth tightly against the surface. Helps you keep weight build-up from excess glue to a minimum. Clean up the EPOXY SPREADER with alcohol before the glue dries and one spreader will last through several projects.
SKU Number: SIGSH678
|
|
|
|
|
| |
Disposable brush for spreading epoxy, resin and solvent cleaning chores. 6 per package, 1/4" wide brush. About 6" long overall.
SKU Number: DUB345
|
|
|
|
|
| |
Handy12 pack of disposable small shop brushes.
About 6" x 1/4" wide. Temporarily out of stock
SKU Number: RRCEABPK
|
|
|
|
 "Fox Lite Precision CA Assembly Kit")
 "Trimmable Adhesive Tips 10 Pack")
 "Mercury Applicator Extension Tips")
 "RRC Pipette 5.8ML Fine 8-Pack")
 "RRC Pipette 5.8ML Medium 8-Pack")
 "Epoxy Mixing Cups 50 Pack")
 "House of Balsa Z tips 10 pack")
 "Pipette Style Fine CA Tips 10 Pack")
 "Capillary Tubing")
 "Hobbico CA Applicator Tips")
 "Zap CA Tips and Capilary Tubing")
 "Sig Mini Glue Gun")
 "Glue Bottle Kit")
 "Du-Bro Mix-It-Stix (QTY/PKG: 25)")
 "Epoxy Replacement Tops Small")
 "Epoxy Replacement Tops Large")
 "SIG Epoxy Spreader")
 "Du-Bro Epoxy Brush 6 Pack")
 "RRC Epoxy/Acid Disposable Brush, 12 Pack")