|
| |
Millennium R/C's X-Gear upgrade for the GWS Slow Stick. Sturdy gear ends the "Squats" you get from the factory gear forever. Less tripping on landing also. All around a great improvement. Same gear included with the Millennium Slow Stick-X. Carbon struts are repairable and replacable, extra set listed below.
SKU Number: MRCXGII
|
|
|
|
|
| |
Millennium R/C's X-Gear replacement carbon rod set.
SKU Number: MRCXGC
|
|
|
|
|
| |
This item includes:
1. New improved battery mount
2. Improved front and rear wing mounts, stronger and better support for rubber bands pegs
3. Customizable servo mounts
4. Adjustable pushrod guide
5. Steerable Nose/Tail Gear Kit
6. Fuselage joiner
7. Velcro Strap and double-sided foam tape
8. Necessary screws, nuts and washer We stock in assorted colors. If you have preference, list first and second choice. Wire size is .062 (1/16"), puchasing an extra set of wheel collars is suggested.
SKU Number: MRCXFS*TG
|
|
|
|
|
| |
This Item Includes:
1. New improved battery mount
2. Improved front and rear wing mounts, stronger and better rubber band pegs
3. Customizable servo mounts
4. Adjustable pushrod guide
5. Fuselage joiner
6. Velcro Strap and double-sided foam tape
7. Necessary screws, nuts and washer We stock in assorted colors. If you have preference, list first and second choice.
SKU Number: MRCXFS*
|
|
|
|
|
| |
Steerable Nose/Tail Wheel Kit - includes pre-shaped wire and hardware needed for assembly. (Wheel & wheel mounting hardware is NOT included). Suggested Wheel: Du-Bro 1" Mini Lite Wheel. May also be used as a Nose Wheel. Available in black only. Wire size is .062 (1/16"), an extra set of wheel collars is suggested. BLACK IS TEMPORARILY OUT OF STOCK
SKU Number: MRCXFTG-*
|
|
|
|
|
| |
Servo Mount Kit - includes plastic servo mounts, adjustable pushrod guide and necessary screws and nuts.We stock in assorted colors. If you have preference, list first and second choice.
WHILE SUPPLIES LAST - These are the last that will be sold on their own. Black color is sold out.
SKU Number: MRCXFSM
|
|
|
|
|
| |
Tan rubber bands stick out sorely on a red Slow Stick wing. While these lighten a bit when stretched out they tend to visually fade into the model much better.
1/4 pound of the the correct size and color for your stick, plain packaging.
SKU Number: RRCRBR
|
|
|
|
|
| |
Wrong color rubber bands stick out sorely on Slow Stick wings. While these lighten a bit when stretched out they tend to visually fade into the model much better.
1/4 pound of the the correct size and color for your stick, plain packaging.
SKU Number: RRCRBY
|
|
|
|
|
| |
Wrong color rubber bands stick out sorely on Slow Stick wings. While these lighten a bit when stretched out they tend to visually fade into the model much better.
1/4 pound of the the correct size and color for your stick, plain packaging.
SKU Number: RRCRBB
|
|
|
|
|
| |
Light Kit made perfect to fit your Slow Stick or other similar sized models up to about 46" wingspan. Wires long enough to install with tape on bottom of wing surface allowing lights to hang couple inches off the wing tips, elevator and motor mount. As such they are easily seen from many different orientations in the sky. 4 LED Setup, 1 red for left wing, 1 green for right wing, 1 white for tail and 1 yellow for nose. Aproximate draw is only 85mah. Our light kit simply plugs onto your XH balance connector on your 3S Lipo pack. XH is the most common plug as found on Radical RC, E-Flite, Align, Dualsky, Electrifly, Tenergy and many others. No soldering, just plug them in and head for the stars.
SKU Number: RRCSSNFL4
|
|
|
|
|
| |
Light Kit made perfect to fit your Slow Stick or other similar sized models up to about 46" wingspan. Wires long enough to install with tape on bottom of wing surface allowing lights to hang couple inches off the wing tips, elevator and motor mount. As such they are easily seen from many different orientations in the sky. 8 LED Setup. 2 red for left wing, 2 green for right wing, 2 white for tail and 2 yellow for nose. Aproximate draw is only 85mah. Our light kit simply plugs onto your XH balance connector on your 3S Lipo pack. XH is the most common plug as found on Radical RC, E-Flite, Align, Dualsky, Electrifly, Tenergy and many others. No soldering, just plug them in and head for the stars.
SKU Number: RRCSSNFL8
|
|
|
|
|
| |
Ever crease your horizontal stab in a crash or flip on landing? I've made this mistake a time or two and the reason why we designed this part. Not a bad idea to put it on from the beginning. A great way to repair an already damaged stab section. Made from 1/64th aircraft ply. Each package contains 2 parts. Glue to the surface of your stab. Top and bottom or just one side if you like. Factory mounting holes are already pre-drilled and ready to go. The thin ply is still flexible and is designed to prevent the stab from creasing at the boom when stressed too far. If your building a canard, this part would really be a must have as the canard is under much greater flight loads than a horizontal stab. Also not to be overlooked is anything you run the model into hits the canard first. Save yourself some troubles later on by using this part now. Suggested method is to glue to surface(s) with a thin smear of GWS's provide glue or CA, center carefully and weigh down with a modest weight like a book against a flat surface until dry. NOW SHIPPING!
SKU Number: RRCSSHS
|
|
|
|
|
| |
Use to stiffen up the mounting points on your V-Tail sections. It's possible to crease the V-tail foam parts if you flip the model over harshly on landing. This part set will fix that damage or if instaled to begin with perhaps eliminate the failure all together. Super light weight, made from 1/64 aircraft ply. Each package contains 2 cut sheets. Mounting holes are pre-drilled for easy mount up. Part may be used on one or both sides of your stab sections. You decide. If you plan on using on both sides, 2 sets must be ordered. Suggested method is to glue to surface(s) with a thin smear of GWS's provide glue or CA, center carefully and weigh down with a modest weight like a book against a flat surface until dry.
SKU Number: RRCSSVTS
|
|
|
|
|
| |
Tired of your Slow Stick tail bending, flapping in the wind at your higher than normal speed? Wishing for more rigid control? Here is your ultimate tail upgrade!! This tail will not flutter and is many times more rugged than the stock tail. If your worried about tail loads lifting heavy weights, flying fast or just plain love the idea of Slow Sticks but hate foam, welcome to heaven. A fully self jigging stick built tail. You can press this together and shake it up in the air hard as you like, nothing is falling apart. I'm tempted to cover one without glue for experimental (show off ;-) purposes. However, I do recommend you glue it together. Simply piece the jigsaw together, hold to flat surface and wick thin CA into all the joints, bevel the elevator and rudder 45 degrees for tape hinges (or 90 degree points for CA hinges), round out the edges, surface sand, cover, mount, hook up control rods and fly. Kit comes as complete package with our custom upgrade horn set and vertical stab mount system. ($6 upgrades value) and instructional drawing. Parts are exact stock shape (except no hard to cover scallops) and hinge lines. Laser cut from 3/16 balsa right here in the good ol' USA. Mounting holes and control horn holes are all pre-made. Your tail will go on straight and true. Additionally, the stab mount has provisions for moving the stab forward from stock location in order to give you more elevator throw if your building an aerobatic monster. Fully compatible with Stevens Aero or Millennium upgrade kits. Don't forget to get some transparent covering for this kit, she is a real beauty when complete.
SKU Number: RRCSSBTG
|
|
|
|
|
| |
NEW!! Slow Stick X - X-Trainer Repair Kits (WOOD ONLY) You've asked for it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer tail section. These repair kits are of the new design. Hardware and instructions which are included in "Short Kit" are not included in this repair kit. This item is the Tail Kit Only. Instruction Download.
SKU Number: MRCSSXXTRK-T
|
|
|
|
|
| |
Handy parts kit can be used as a mount for whatever you might imagine mounting to the boom. This is really a 2 piece gearbox frame that is in little use, we have many on hand. Handy screw holes for mounting your project abound. One part has square through hole, one part has square hole with bottom that can be easily cut out for another pass through mounting hole. Shown split with screws removed, comes assembled as 1 piece. This is is 10 units (2 useful parts per unit).
SKU Number: RRCSSBMDDx10
|
|
|
|
|
| |
Handy parts kit can be used as a mount for whatever you might imagine mounting to the boom. This is really a 2 piece gearbox frame that is in little use, we have many on hand. Handy screw holes for mounting your project abound. One part has square through hole, one part has square hole with bottom that can be easily cut out for another pass through mounting hole. Shown split with screws removed, comes assembled as 1 piece.
SKU Number: RRCSSBMDD
|
|
|
|
|
| |
Want to bolt on a perbent aluminum or fiberglass main gear? Here is the attachement for that purpose. A customer in our shop actually uses a monster overpowered Slow Stick as a tug for 3 meter sail planes. YIKES! His need for an ultra rugged gear attachment inspired this upgrade part. Rugged with plenty of surface area to drill to match your gear. Thread directly into the tough aircraft ply or use blind nuts. Provide your own fasteners or get them from our hardware section. TEMPORARILY OUT OF STOCK
SKU Number: RRCSSBOMGM
|
|
|
|
|
| |
Here is a set of real carbon solid rods to stiffen up your slow stick wings. The factory rods, regardless if they are black or white are fiberglass. These are much stiffer holding your dihedral closer to your setting in flight. Great for models enduring a little toughness for camera work or big motor systems. This item is all 4 rods to do one wing, a pair of front and rear. TEMPORARILY OUT OF STOCK
SKU Number: RRCSSCWRS
|
|
|
|
|
| |
Made in the USA ABS/Nylon blend outrunner motor mount. Provides a strong, affordable and lightweight solution for mounting your outrunner motor to any 10mm x 10mm stick. Works with a wide selection of outrunners and includes (4) 3mm x 4mm screws to easily mount the motor. Mounting holes are slotted to allow a fit for a variety of motors. Mount has 4 slotted mounting holes and will accept from 15.7mm to 23.3mm diameter bolt pattern which covers most motors made 22-28mm OD. Mount ID (where rear mounted motor would fit) is 30.5mm. Mount is already notched for outrunner wire exit. A nice touch! We stock all colors. Pick your color 1st and 2nd choice. If you pick the same color twice and we happen to be out then your telling us the color is very important to you and to hold your order until new stock arrives. It's helpful if you pick two colors so if we are out of one we can still speed your order along without delay. Of course we always try to keep plenty of all colors in stock so you can get the flavor you like best.
SKU Number: MRCOMM
|
|
|
|
|
| |
Fits Model Motors and Himax outrunners (and many other brands) 22-28mm. Max motor OD about 1.5" or 39mm Slot spacing 3/4" or approximately 19mm on center.
SKU Number: RRCBMM2OUT
|
|
|
|
|
| |
Nice Wheels for Slow Sticks and variants. Good for larger heavier models also. Same as wheel used by Millennium RC in Build Kit bundles of the SSX and SS Trainer. 2.5" OD, .625 Width. Nice and light at 20.7 grams for the pair.
SKU Number: MRCSSXWH2.5TH
|
|
|
|
 "Millennium RC Slow Stick X-Gear Landing Gear Set")
 "Millennium X-Gear Replacement Rod Set")
 "Millennium RC X-Fuse Set With Tail Gear")
 "Millennium RC X-Fuse Set Without Tail Gear")
 "Millennium RC X-Fuse Steerable Nose/Tail Gear Kit")
 "Millennium RC Servo Mount Set")
 "Red Slow Stick Rubber Bands, 1/4 LB")
 "Yellow Slow Stick Rubber Bands, 1/4 LB")
 "Blue Slow Stick Rubber Bands, 1/4 LB")
 "Night Fly Lights 4 Led")
 "Night Fly Lights 8 Led")
 "Horizontal Stab Stiffener Plates")
 "Slow Stick Balsa Tail Group")
 "Slow Stick X / X Trainer Tail Repair Kit")
 "Boom Mounting Do-Dad 10 Pack")
 "Boom Mounting Do-Dad")
 "Slow Stick Bolt On Main Gear Mount Kit")
 "Carbon Wing Rod Set for Slow Stick")
 "Millennium RC Outrunner Motor Mount 22-28mm Motors to 10mm Stick")
 "Radical RC #2 Stick Mount for 22 and 28mm Outrunner Motors Current Stock Color Purple Only!")
 "RRC 2.5 Inch Light Foam Wheels Pair")