Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.
All pushrods are found here. Select by size sub category below or in left column under "Pushrods".
Perfect for 1/2A airplanes. No shrink, no stretch, free running pushrod assembly. Light weight, flexible and strong. Complete 20 assembly includes (4) Mini Nylon Kwik-Links, (4) Spring Threaded Couplers, (2) 20 Long .047 diameter wire and (2) nylon sleeves.
The DU-BRO Micro Push Rod System is a lightweight and easy-to-install control linkage designed for small to medium electric RC airplanes. It gives you smooth, accurate control while keeping the weight of your model as low as possible. This makes it perfect for foamies, indoor planes, park flyers, and small electric aerobatic models.
Each package includes two complete push rod systems, so you can set up two control surfaces--such as the elevator and rudder. Everything you need is included, and the parts are designed to work together for simple, clean installation.
Each set contains:
2 pushrods with a pre-bent 90? end, ready to use
2 pushrod housings that guide the rods and stop them from bending
2 Micro E/Z Links for attaching to your control horn
2 Mini E/Z Connectors for attaching to your servo arm and making easy adjustments
These components allow for smooth movement with very little friction. They also make it easy to fine-tune your control surfaces so your airplane responds the way you want it to.
The Micro Push Rod System is available in four different weights to fit a wide range of aircraft sizes:
#847 - 3.2 grams per set
#852 - 4.6 grams per set
#922 - 5.7 grams per set
#941 - 18 grams per set (for slightly larger electric planes)
This system works great on:
Indoor flyers
Small park flyers
Slow flyers
Foamies and EPP aircraft
Lightweight scratch-built planes
Installation is quick and beginner-friendly. The housings glue easily to your model, and the connectors make attaching and adjusting your pushrods simple.
Proudly Made in the USA, the DU-BRO Micro Push Rod System provides a dependable and lightweight way to get precise control from your electric RC aircraft.
This item qualifies as a Rod Stock Item, read below:
Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. Weight is in grams per meter, as per the manufacturer documentation, no guarantees on weight. Find other qualifying items to mix and match to meet the 6PC Minimum Purchase Requirement:
A pushrod carries the motion from a servo to a control horn, and the .047 inch size refers to the diameter of the wire ends used in these light linkages. This gauge suits smaller models and lighter control surfaces, where a fine, low-friction linkage keeps weight down and response crisp.
Du-Bro Pushrod Systems
The pushrod systems in this category come from Du-Bro. The Mini Pushrod System #113 pairs .047 inch wire ends with a 20 inch length, while the Micro2 Pushrod System #922 offers a 30 inch length and is supplied as a two-pack. Each system combines the rod with the ends needed to complete a linkage run.
A longer system can be trimmed to fit a shorter run, so choosing between the two is largely about the distance from servo to control horn in your model.
Check the two systems here to match one to your linkage length.
 "Du-Bro Mini Pushrod System #113 (20\" x .047\")"){kind=small}
 "Du-Bro 30\" Micro2 Pushrod System #922 (30\" x .047\") 2-Pack")
