$7 Minimum Shipping — USA Addresses See checkout for all options. Insurance automatically added to all USA orders over $50. $13 Minimum Shipping — All Phone Orders Worldwide shipping — see checkout for shipping options.
These sure-lock Black Nylon Kwik-Links are self threading nylon for 2MM (0.079") rods or threaded couplers. Ideal for replacements on imported A.R.F.'s and kits. Unit looks like nylon clevis 2nd from right except is black.
Comes with standard press on nylon and permanent steel press on retainer. Also equipped with socket head fastener to allow for tighter installations. Drilled to clamp onto 2-56 and 2mm rods. This brass connector has hex head to allow you to hold it while tightening.
GWS rack of 6 L bend ratainers. Simply bend an "L" into the end of your wire, put the eyelet of this retainer over the L end then clip the base over the leg of your wire. Perfect solution for quick and easy pushrod ends.
Comes with standard press on nylon and permanent steel press on retainer. Also equipped with socket head fastener to allow for tighter installations. Drilled to clamp onto 2-56 and 2mm rods so common in ARFS.
Gold-N-Clevises. These tempered steel clevises are the strongest clevises made. They feature an interlocking collar, welded pin and an exclusive steel retaining clip to prevent accidental opening. They are brass or tin plated for easy soldering.
(2) 2mm Clevises and Retaining Clips
FEATURES Heat treated tin plated spring steel Secure Retaining clips- prevents accidental openings Clevis can be soldered Interlocking collar with 2mm threads Clevis pin is welded into place for strength INCLUDES Two 2mm clevis Two retaining clips REQUIREMENTS Nothing COMMENTS Used to connect a 2mm pushrod to a control such as a control horn or throttle lever.
Four barrels, washers, nuts and set screws. Allen wrench not included, requires 1.5mm. Will work on any rod size 1.5 to 1.85mm (.074"). 2mm pushrods and 2-56 are usually this size or smaller. The threads are rolled and larger than the base wire diameter. Instal in 5/64" (1.9mm) hole.
Four barrels, washers, nuts and set screws. Allen wrench not included, requires 1.5mm. Will work on any rod size 1.5 to 2mm (.079"). 2mm pushrods and 2-56 are usually this size or smaller. The threads are rolled and larger than the base wire diameter. Install in 7/64" (2.6mm) hole.
Clevis threads onto 2mm shaft. Metal clevis pins are 1mm od (.039). May also be used with micro size .032" drilled control horns with very minor increase in hold diameter. Very light weight design. 10 clevis and pins per package. Package of extra snap pins for this clevis is pn#MPJ2102.
Clevis threads onto 2mm shaft. Metal clevis pins are 1.6mm od (.063 1/16"). May also be used standard horns designed for typical 2-56 hardware. However, must be threaded onto a 2mm pushrod thread. Very light weight design. 10 clevis and pins per package. Extra snap pins are PN# MPJ2112.
Plastic Clevis, 44mm Length, Slot Width 3, Pin 2.5mm OD, M3 The clevises with a special metal snap pin are suitable for all types of exact connections of pushrods and control horns. The end of the metal snap pin with the lock minimizes the risk of a spontaneous loosening of fatigue due to vibration. Package contains the snap pins 2.5 mm dia. Spare snap pins MPJ 2123 BR. 10-Pack
SKU Number: MPJ2125B
2mm Rod Ends and Clevises
Metric 2mm linkage hardware connects a pushrod to a horn on models built around metric wire, and this category gathers the clevises, connectors, and retainers sized for 2mm and .079 inch wire. These fittings suit the light control forces of smaller electric and sport airplanes.
Kwik-Links and Connectors
The Du-Bro 2mm Nylon Kwik-Link threads onto a pushrod and clips to a control horn, and the Du-Bro Kwik Grip and Heavy Duty E-Z Connectors in 2-56/2mm clamp to a servo arm for tool-free length adjustment. The 2mm Safety Lock Kwik-Link adds a locking feature to help keep the clevis closed.
Wire Retainers
For plain wire ends, the GWS L Bend Retainers made for .079 inch wire hold a bent pushrod end in place at the horn, a simple and light way to secure the link.
Match a 2mm clevis or retainer to your linkage in the listings below.
 "Du-Bro 2mm (0.079\") Nylon Kwik-Link (QTY/PKG: 2 )")
 "Du-Bro Kwik Grip E-Z Connector 2-56/2mm")
 "Du-Bro 4-40 Safety Lock Kwik-Link 12-Pack")
 "L Bend Retainers by GWS for .079\" (2mm) wire")
 "Du-Bro Heavy Duty E-Z Connector 2-56/2mm")
 "2mm Safety Lock Kwik-Link")
 "Sullivan 2mm Gold-N-Clevises")
 "1.5mm/2mm/2-56 EZ-A-Just Rod Ends up to 1.8mm shafts")
 "1.5mm/2mm/2-56 Heavy Duty EZ-A-Just Rod End up to 2mm Shafts")
 "MP Jet Micro Clevis")
 "MP Jet Small Clevis")
 "Brass Snap Pins for MP Jet Micro Clevis 10 Pack")
 "Snap Pins for MP Jet Small Clevis 10 Pack")
 "MP Jet Clevis for 2.5mm shaft")